Tender For Certain B/R Repairs To Buildings Of E/M Installation Under Ge Dehu Road
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repairs To Buildings Of E/M Installation Under Ge Dehu Road
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | S & F in repairs stainless steel curtain rod 25 mm dia complete with bracket and side knobs all as specified and directed. |
| 2 | S & F in repair Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings and fillets complete all as specified and directed. |
| 3 | M & L for Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 4 | S & F 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed. |
| 5 | S & F in repair 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 6 | S&F in repair 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 7 | S & F in repair 150mm aluminium alloy handle, cast type, anodised |
| 8 | S & F only in repair door closer hydrau lically regulated,designation No.1universal type, (extruded section) body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed. |
| 9 | Supply only in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 10 | Supply only in repair 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 11 | Supply only in repair 15 mm bore Stop valves/, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 12 | Supply only in repair 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 13 | Supply only in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 14 | Supply only in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 15 | Supply only in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed. |
| 16 | Supply only in repair 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Shakti) |
| 17 | Supply only in repair 20mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed. |
| 18 | Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed. |
| 19 | Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed. |
| 20 | S & F 15 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 21 | S & F 20 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 22 | S&F 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed. |
| 23 | S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed. |
| 24 | S & F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.Note:wash basin shall conform to IS 2556(part-4)-2004. |
| 25 | M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres cast iron automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs. |
| 26 | S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs . |
| 27 | Supply only soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 28 | Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed. |
| 29 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 30 | M & L for Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 all as specified and as directed. |
| 31 | Taking down cement plaster on brick walls or concrete surface including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge. |
| 32 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete walls finished even and smooth w/o using extra cement. |
| 33 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement. |
| 34 | M&L for two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 35 | M&L for preparation of old plastered wall surfaces by washing down , brooming down or steel wire brushing etc and applying One coat Cement Base paint complete all as specified and directed. |
| 36 | Preparation old plastered surfaces of wall and applying One coat Oil Bound Distemper complete all as specified and directed |
| 37 | Preparation old plastered surfaces of ceiling and applying One coat Oil Bound Distemper complete all as specified and directed |
| 38 | M&L for two coats of oil bound distemper on new plastered surfaces of walls including 3mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 40 | M&L for joint free Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 41 | M & L for joint free ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 42 | All as per item No 41 above but on skirtings incl 10 mm th rendering in CM (1:3) complete. |
| 43 | M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx300x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:3 all as directed. |
| 44 | Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed |
| 45 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed |
| 46 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm |
| 47 | M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed. |
| 48 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed |
| 49 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 50 | S&F 30mm mm thick flush shutters, solid core construction, with block board core and plywood face panels.all as per spd complete all as specified and as directed. |
| 51 | S & F Glazed skeleton shutter 30mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a). |
| 52 | S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 53 | S& F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 54 | S& F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 55 | S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 56 | M&L 12 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete |
| 57 | S&F 4.8 mm thick exc 0.50 sqm in each pane tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed |
| 58 | S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed |
| 59 | S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed. |
| 60 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed. |
| 61 | S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifed. |
| 62 | All as per item No. 13 above but plain sheet fix in valley gutter / ridge/ View cutter etc.complete all as specified and as directed. |
| 63 | Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level) |
| 64 | M&L for 100 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface without extra cement even and smooth complete all as specified and directed. |
| 65 | M & L for 75 mm thk Cement conc type C-2, 1:3:6 (40 mm grade Agg) as in plinth protection finished even and fair . |
| 66 | M & L for PCC type D2 1:4:8 (40 mm Grade Agg ) 75mm thick as in sub base, in floors etc. complete all as specified. |
| 67 | M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block (glossy finish) any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified. |
| 68 | M& L Chequered Cement Concrete Tiles (glossy finish ) 20 CM x 20 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 69 | Dismantling of cast iron or reinforced concrete/ PVC pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed |
| 70 | M&L for 75 mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directe |
| 71 | All as per Srl item No.76.00 above but fixed to walls |
| 72 | All as per Srl item No.76.00 above but 110 mm dia fixed to walls |
| 73 | M&L for 75 mm dia PVC (SWR) bends any radius complete all as specified and directed |
| 74 | All as per Srl item No.79.00 above but 110 mm dia |
| 75 | M&L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 76 | M&L for 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 77 | Dismantling MS works of any Desc. Not otherwise provided for |
| 78 | S&F for Framed work as in doors or gates of angle or other similar work, section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complet Fe-410-w (gdeE-250 quality-A) |
| 79 | M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 80 | Dismanteling fencing wire mesh , any type |
| 81 | Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good surface. |
| 82 | Excavation in post holes or similer holes each nexc. 0.5 cum getting out returning filling in and ramming earth around in layers n. exc 25 cm,watering , and removing surplus soils to a distence nexc 50m and making good surface in hard soils,complete all as specified. |
| 83 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post. |
| 84 | S&F angle iron fencing post and struts/flat iron including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size. |
| 85 | S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank. |
| 86 | Supply only chain link MS galvanised fencing incl line wire 75x75mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete |
| 87 | Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire |
| 88 | M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips. |
| 89 | S&F in repair GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. All as specified (Each line of wire to be measured.) |
| 90 | M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth |
| 91 | M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender