Tender For Special Repair/ Replacement Of Pumping Line From Buniyadabad Pump House To Ancom Mess And Provn Of Geyser For Single In-Living Accommodation At Bldg No T-4 And Porta Cabin Ancom Under Ge Haddo, Sri Vijaya Puram
Tender Value
48 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
13 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/ Replacement Of Pumping Line From Buniyadabad Pump House To Ancom Mess And Provn Of Geyser For Single In-Living Accommodation At Bldg No T-4 And Porta Cabin Ancom Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | M&L in repairs for Ductile Iron (DI) pipe of 150 mm nominal bore, spigot and socket type, centrifugally cast (spun), Class K-7, in suitable lengths, including suitable DI specials, laid in trenches, floors, inside jetty or on supporting pillars, as required, conforming to IS 8329 and other relevant standards, with internal cement mortar lining and external coating of blue colour, including jointing with suitable rubber gasket, and including necessary GI nuts, bolts and washers wherever required for flanged joints, complete all as specified and as directed. |
| 2 | M&L in repairs for Ductile Iron (DI) pipe of 100 mm nominal bore, spigot and socket type, centrifugally cast (spun), Class K-7, in suitable lengths, including suitable DI specials, laid in trenches, floors, inside jetty or on supporting pillars, as required, conforming to IS 8329 and other relevant standards, with internal cement mortar lining and external coating of blue colour, including jointing with suitable rubber gasket, and including necessary GI nuts, bolts and washers wherever required for flanged joints, complete all as specified and as directed. |
| 3 | S&F in repairs Cast Iron Sluice Valve of 150 mm nominal bore (DN 150), PN 1.6, flanged on both ends, heavy-duty type, ISI/BIS marked, suitable for water supply application, complete with stainless steel spindle, operating hand wheel, gland assembly, gland packing and all internal working components, including suitable new EPDM/rubber flange gaskets, GI/HDG/SS bolts, nuts and washers, as required, including taking down and removing existing defective valve where required, minor necessary modifications, cutting, drilling, alignment, jointing, tightening, testing and making good the connections complete, all as specified and as directed.Note: Rate shall include all necessary materials, labour, tools and tackles, transportation, handling, jointing materials and minor modifications necessary for proper installation and satisfactory operation of the valve, complete. |
| 4 | S&F in repairs Cast Iron Sluice Valve of 100 mm nominal bore (DN 150), PN 1.6, flanged on both ends, heavy-duty type, ISI/BIS marked, suitable for water supply application, complete with stainless steel spindle, operating hand wheel, gland assembly, gland packing and all internal working components, including suitable new EPDM/rubber flange gaskets, GI/HDG/SS bolts, nuts and washers, as required, including taking down and removing existing defective valve where required, minor necessary modifications, cutting, drilling, alignment, jointing, tightening, testing and making good the connections complete, all as specified and as directed.Note: Rate shall include all necessary materials, labour, tools and tackles, transportation, handling, jointing materials and minor modifications necessary for proper installation and satisfactory operation of the valve, complete. |
| 5 | S&F in repairs Cast Iron (CI) Non-Return Valve (NRV) of 150 mm nominal bore (DN 150), PN 1.6, heavy-duty type, ISI/BIS marked, suitable for water supply application, with stainless steel spindle and operating mechanism/hand wheel, flanged on both ends, complete with suitable new EPDM/rubber flange gaskets, GI/HDG bolts, nuts and washers, including taking down and removing existing defective valve where required, minor necessary modifications, cutting, drilling, alignment, jointing, tightening, testing and making good the connections, complete all as specified and as directed.Note: Rate shall include all necessary materials, labour, tools and tackles, transportation, handling, jointing materials and minor modifications required for proper fixing, alignment and satisfactory operation of the valve, complete. |
| 6 | S&F in repairs Cast Iron (CI) Non-Return Valve (NRV) of 100 mm nominal bore (DN 150), PN 1.6, heavy-duty type, ISI/BIS marked, suitable for water supply application, with stainless steel spindle and operating mechanism/hand wheel, flanged on both ends, complete with suitable new EPDM/rubber flange gaskets, GI/HDG bolts, nuts and washers, including taking down and removing existing defective valve where required, minor necessary modifications, cutting, drilling, alignment, jointing, tightening, testing and making good the connections, complete all as specified and as directed.Note: Rate shall include all necessary materials, labour, tools and tackles, transportation, handling, jointing materials and minor modifications required for proper fixing, alignment and satisfactory operation of the valve, complete. |
| 7 | S&F in repairs Cast Iron Double Orifice Air Valve of 150 mm nominal bore (DN 150), PN 1.6, conforming to IS 14845, ISI/BIS marked, heavy-duty type, suitable for water supply application, flanged on both ends, complete with suitable new EPDM/rubber flange gaskets, GI/HDG bolts, nuts and washers, including taking down and removing existing defective air valve where required, minor necessary modifications, cutting, drilling, alignment, jointing, tightening, testing and making good the connections, complete all as specified and as directed. |
| 8 | S&F in repairs Cast Iron Double Orifice Air Valve of 100 mm nominal bore (DN 150), PN 1.6, conforming to IS 14845, ISI/BIS marked, heavy-duty type, suitable for water supply application, flanged on both ends, complete with suitable new EPDM/rubber flange gaskets, GI/HDG bolts, nuts and washers, including taking down and removing existing defective air valve where required, minor necessary modifications, cutting, drilling, alignment, jointing, tightening, testing and making good the connections, complete all as specified and as directed. |
| 9 | S&F Galvanized Iron (GI) tubing/pipe of 80 mm nominal bore, medium grade, ISI/BIS marked, conforming to relevant IS standards, laid/fixed in trenches, floors, walls or ceilings, including all necessary GI fittings, bends, tees, sockets, unions, flanges, nipples, reducers, clamps, brackets, hangers, supports, nuts, bolts and other accessories, including cutting, threading, jointing, alignment, fixing and making good the surfaces, complete all as specified and as directed. |
| 10 | S&F Galvanized Iron (GI) tubing/pipe of 50 mm nominal bore, medium grade, ISI/BIS marked, conforming to relevant IS standards, laid/fixed in trenches, floors, walls or ceilings, including all necessary GI fittings, bends, tees, sockets, unions, flanges, nipples, reducers, clamps, brackets, hangers, supports, nuts, bolts and other accessories, including cutting, threading, jointing, alignment, fixing and making good the surfaces, complete all as specified and as directed. |
| 11 | S&F in repairs Gunmetal Gate Valve of 50 mm nominal bore (DN 50), conforming to IS 778, ISI/BIS marked, suitable for water supply service, complete with gunmetal body, bonnet and internal components, stainless steel/brass spindle as per manufacturer's standard, hand wheel and screwed ends suitable for GI/iron pipes, including necessary fittings such as unions, check nuts, nipples, sockets and other required accessories, including taking down and removing existing defective valve where required, necessary minor additions/alterations, cutting, threading, jointing, alignment, testing and making good the connections, complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | S&F in repairs DI/CI pipe specials/fittings suitable for spigot and socket jointed pipes, conforming to relevant IS standards, comprising bends of any type, radius and angle; tapers/reducers/increasers of any type, including straight, bend, increasing, decreasing and double-socket types; tee pieces with single branch; Y-junctions with double branch; and other necessary DI/CI specials, of nominal diameter up to and including 150 mm, including suitable rubber/EPDM sealing gaskets, jointing materials, bolts, nuts and washers wherever applicable, including taking down existing defective fittings where required, minor necessary cutting, fitting, alignment, jointing, testing and necessary additions/alterations for proper fixing, complete all as specified and as directed.Note: Rate shall include all necessary materials, labour, tools and tackles, handling, transportation and jointing accessories required for satisfactory installation of the fittings. |
| 13 | M&L in repairs for making good/rejointing run lead joint of 150 mm nominal diameter (DN 150) for Cast Iron/Ductile Iron pipe, including cleaning and preparing the socket and spigot, supplying and packing suitable lead wool/lead material, caulking firmly into the joint, finishing the joint watertight and all necessary materials, labour, tools and tackles, complete all as specified and as directed. |
| 14 | M&L in repairs for making good/rejointing run lead joint of 100 mm nominal diameter (DN 150) for Cast Iron/Ductile Iron pipe, including cleaning and preparing the socket and spigot, supplying and packing suitable lead wool/lead material, caulking firmly into the joint, finishing the joint watertight and all necessary materials, labour, tools and tackles, complete all as specified and as directed. |
| 15 | Material and labour for plain cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including use and waste of from work complete all as specified and directed. |
| 16 | Material and labour for supporting pillar constructed of masonry of dimensions as required on site with precast cement concrete solid block masonry in PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) 20 mm thick in CM (1:6) complete all as specified and directed. |
| 17 | Material and Labour for cutting existing BT / PCCroad of size 45cm x 60cm for taking out/laying of underground cable/pipe and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and as directed . |
| 18 | Excavating in trenches hard soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out including all as specified and directed. |
| 19 | M&L for returning ,filling in including spreading, levelling,watering and well ramming in layers not exc 25cm in hard dense soil complete all as specified. |
| 20 | M & L for Removing excavated materials (soils) n exc 50m and depositing where directed at a level n exc 1.5m above the statrting point complete all as specified. |
| 21 | M and L for dismantling old valve chamber and material and labour for construction of brick masonry new valve pit chamber of size 900mmx900mmx900mm (internal), 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate, providing with old size fly ash bricks masonry wall of 230mm thick built in CM 1:6, rendering 15mm thick in CM 1:6 finished even and smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even externally and plaster shall be done 150 mm below ground level, supply and fix 2.00 mm thick MS sheet steel cover fixed on 40X40X6mm angle iron frame embedded in PCC 1:2:4 coping with locking arrangement and MS hold fast and handle made out of 25x6mm flat iron, applying two coats of synthetic enamel paint of approved shade over a coat of primer (red oxide) to all exposed steel surfaces and applying three coats of white wash to exposed plastered surfaces and making good all disturbed suface to match surrounding complete all as specified and as directed . |
| 22 | M & L point wiring complete with 1100 volts grade, 4.0 sqmm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : V-Marc/Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 23 | S & F Switch modular type , flush type, single pole one way 16 amps all as directed. Make: Anchor/ Cona/ Legrand |
| 24 | S & F Socket outlet 2 in 1 modular type, 3 pin,6/16A, flush type, universal all as directed. Make: Anchor/ Cona/ Legrand. |
| 25 | S&F Energy Efficient BEE 5-Star rated storage type Electric Water Heater/Geyser of 25 litres capacity, suitable for 230 V, single phase, 50 Hz AC supply, complete with thermostat, thermal cut-out/over-temperature protection, heating element, indicating lamp/display and necessary mounting arrangement, including flexible hot and cold water connection pipes, pressure relief/safety valve, non-return valve, drain arrangement, necessary unions and fittings, and fixing to wall with 4 Nos. suitable heavy-duty anchor fasteners, including all necessary electrical and plumbing connections, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge.Make: Usha, Model Aquerra, or equivalent approved make such as Crompton / Havells. |
| 26 | M & L submain wiring with 2 runs of 4.0 sqmm multistranded copper conductor cable (FRLSH) PVC insulated 1100 Volts grade and one run of 4.0 sqmm PVC insulated multistranded copper conductor cable (FRLSH) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 25 mm width complete all as directed. |
| 27 | M & L submain wiring with 2 runs of 6.0 sqmm multistranded copper conductor cable (FRLSH) PVC insulated 1100 Volts grade and one run of 4.0 sqmm PVC insulated multistranded copper conductor cable (FRLSH) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 25 mm width complete all as directed. |
| 28 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways,including taking down old unserv DB of any type /rating and making good to the distrubed surface /walls. |
| 29 | S&F MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . |
| 30 | S & F MCB SP 06-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed .Note for item No 29 & 30:- Termination of all wiring in to MCBs/ MCCBs/DBs shall be through copper lugs/ thimbles of adequate size. |
| 31 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 32 | S & F 16 mm dia outer dia CPVC pipies SDR 13.5 and plain CPVC SDR 11 fittings on wall / ceiling or laying in floor including suitable reducer for 15 mm dia taps fittings as requied complete all as specified and directed. |
| 33 | S & F 15 mm dia brass chromium plated bib tap fancy type with wall flange complete all as specified. |
| 34 | S & F 15 mm dia CP angle cock with flange fancy type with capstan head handle screwed down for iron pipe or for brass ferrrule etc cpomplete all as specified & directed. |
| 35 | Supply and fixing Cross Arms, bracings, supports, clamps, eye hook etc structural steel sections including pole clamps stay clamps, D clamps nuts, bolts, washers welding bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed. |
| 36 | Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender