Tender For Provision Of Cold Storage At Cook House Of Officers Mess And Certain Minor Works At Various Location At Afa Hyderabad.
Tender Value
44.87 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
18 days left
EMD
89757
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Cold Storage At Cook House Of Officers Mess And Certain Minor Works At Various Location At Afa Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Install, Commissioning & Testing of Cold Storage Unit of Refrigeration Capacity 5.0 KW or higher (1W + 1S) with a desired temperature range of -18 to -20 (Minus 20) Deg C perfectly suitable/compatible for room with minimum dimensions 4.0 Mtr x 4.0 Mtr x 3.80 Mtr (height) complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge. Make : BLUESTAR/HITACHI/DAIKIN/VOLTAS/HAIER |
| 2 | Detailed technical specification of the Cold Storage Unit is as follows : (a) Ambient Temp Range : 44 Deg C (b) Desired Temp Range : -18 to -20 Deg C (During defrost period temp shall be around -14 Deg C) (c) Product to be stored : Meat, Fish & other perishable food/product(d) Pull Down Temp : 24 Hrs (e) PUF Density : 40 Kg per Cum (f) U Factor : 0.05 BTU/Hr/Sqft/Deg F(g) Material of Insulation for wall & ceiling Insulation & thickness : R PUF, 100 mm thick PUF Panels, C 5 Cyclopentene Panels (h) Serration on Panel : On both sides(j) Floor Insulation & Thickness : 100 mm PUF Insulation shall be covered with Bitumen + Tar Felt & finally finished with covered with 75 mm thick PCC. (k) Panel Finish : Inside & Outside PP(l) Door Type & Size - 100 mm thick swing door, flush fit type with clear opening of 34\\" x 78\\" with all standard fittings & pad lock system, Finish PP/PP. (m) Type of Refrigeration Unit - Split Type(n) Type of Cooling - DX type (o) Required Refrigeration Capacity - 5.0 KW or higher x 2 Sets (1 Working + 1 Standby)(p) Type of Refrigerant - R 404 A or latest (q) Type of Compressor - Hermetic, Recip(r) Type of Condersor & Make - Air Cooled, Emerson make fully loaded or as per OEM.(s) Type of Evaporator Units - Forced Air Cooled, Ceiling Suspended, PPGI finish, Make Patton or as per OEM.(t) Controller - Microprocessor based digital temp indication cum controller with fault/trip indication. (u) Type of Light - LED 02 Nos(v) Sequential Controller - Included to operate the units at pre-determined time intervals (4/6/8 hours) & to operate the standby unit in case of emergency. (w) Power Supply - 415 V, 3-Ph, 50 Hz(x) Panel Features : Cam Locks for Jointing of Panels, Flush-in-Type Door with Anti-Condensation Door Heater / Digital Indicator, Panels must be Modular, Pre-Fab Type which can be assembled at site & also can be shifted after dismantling from one place to another & re-assembled at other site.(y) Refrigeration Unit Features :Low Power Consumption Units, Light Weight/Sleek, Sleek Indoor Units , Human Safety, Release Knob inbuilt in door, PP Finish Indoor Units Please Enable Macros to View BoQ information |
| 3 | Detailed technical specification of the Cold Storage Unit is as follows : (a) Ambient Temp Range : 44 Deg C (b) Desired Temp Range : -18 to -20 Deg C (During defrost period temp shall be around -14 Deg C) (c) Product to be stored : Meat, Fish & other perishable food/product(d) Pull Down Temp : 24 Hrs (e) PUF Density : 40 Kg per Cum (f) U Factor : 0.05 BTU/Hr/Sqft/Deg F(g) Material of Insulation for wall & ceiling Insulation & thickness : R PUF, 100 mm thick PUF Panels, C 5 Cyclopentene Panels (h) Serration on Panel : On both sides(j) Floor Insulation & Thickness : 100 mm PUF Insulation shall be covered with Bitumen + Tar Felt & finally finished with covered with 75 mm thick PCC. (k) Panel Finish : Inside & Outside PP(l) Door Type & Size - 100 mm thick swing door, flush fit type with clear opening of 34\\" x 78\\" with all standard fittings & pad lock system, Finish PP/PP. (m) Type of Refrigeration Unit - Split Type(n) Type of Cooling - DX type (o) Required Refrigeration Capacity - 5.0 KW or higher x 2 Sets (1 Working + 1 Standby)(p) Type of Refrigerant - R 404 A or latest (q) Type of Compressor - Hermetic, Recip(r) Type of Condersor & Make - Air Cooled, Emerson make fully loaded or as per OEM.(s) Type of Evaporator Units - Forced Air Cooled, Ceiling Suspended, PPGI finish, Make Patton or as per OEM.(t) Controller - Microprocessor based digital temp indication cum controller with fault/trip indication. (u) Type of Light - LED 02 Nos(v) Sequential Controller - Included to operate the units at pre-determined time intervals (4/6/8 hours) & to operate the standby unit in case of emergency. (w) Power Supply - 415 V, 3-Ph, 50 Hz(x) Panel Features : Cam Locks for Jointing of Panels, Flush-in-Type Door with Anti-Condensation Door Heater / Digital Indicator, Panels must be Modular, Pre-Fab Type which can be assembled at site & also can be shifted after dismantling from one place to another & re-assembled at other site.(y) Refrigeration Unit Features :Low Power Consumption Units, Light Weight/Sleek, Sleek Indoor Units , Human Safety, Release Knob inbuilt in door, PP Finish Indoor Units Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender