Tender For Repair And Maintenenace Of Transformers And Ht/Lt Panels Of 11 Kv Substation Under Stc Bsf Kashmir.
Tender Value
7.75 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
15506
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenenace Of Transformers And Ht/Lt Panels Of 11 Kv Substation Under Stc Bsf Kashmir.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 100 A,30KA,FPMCCB |
| 2 | 250 A,36KA,FPMCCB |
| 3 | 400 A,50KA,FPMCCB |
| 4 | 200 A,36KA,FPMCCB |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 185 sq. mm (57mm) |
| 6 | Providing and applying two or more coats of synthetic enamel paint of approved brand and manufacturer and of required shade on metal surfaces of electrical equipment (panels,Bus duct, Transformer etc.). The work includes the preparation of the surface by thoroughly cleaning oil, grease, dirt, and removing rust or scale using wire brushing or emery paper, complete as per standard specifications and the direction of the Engineer-in-Charge.\\" |
| 7 | Dehydration of transformer oil in the existing transformer at site , moisture removal from transformer oil,and maintain the viscosity of oil. Necessary pump and barrel driving execution of work shall be part of contractor if oil drain out necessary. Transformer oil dehydration is based on use of synthetic adsorbents ,additionally allows moisture to diffuse out of the paper into the oil. and submit the test report of transformers after conducting of its dielectric strength, viscosity, thermal conductivity, chemical stability ,BDV value etc as required. |
| 8 | Supplying and fixing joint box of size 450 X 450 X 250 MM having 250 Amps rating, 4 strips, long aluminum busbars mounted on suitable no of porcelain/SMC insulators, complete with all accessories making connections as required |
| 9 | Supplying and replacement of complete Silica Gel approved make and required capacity for oil-filled electrical transformer. indicating-type (orange) silica gel with standered complies with IS: 3401-1992 complete as per standard specifications and direction of the Engineer-in-Charge.\\" |
| 10 | Comprehensive overhauling, servicing, and routine testing of 11 kV Indoor Vacuum Circuit Breaker (VCB) panel. The scope of work includes racking out the breaker, thorough cleaning using vacuum cleaners and CRC/contact cleaners, checking and lubricating the mechanical operating and tripping mechanism, tightening of all power and control electrical connections, and checking pole discrepancy and replacement of parts to ensure safety and optimal performance. The item includes electrical testing: Measurement of Insulation Resistance (Megger), Contact Resistance Measurement (CRM),Testing tripping and closing mechanisms complete as per standard specifications and the direction of the Engineer-in-Charge. |
| 11 | Servicing, overhauling, and testing of LT Air Circuit Breaker (ACB), including isolation racking out, dismantling of arc chutes, cleaning of fixed and moving contacts with approved cleaning agents, lubrication of mechanical linkages and racking mechanisms. The work includes checking and calibration of all protective relays (Overload, Short Circuit, Earth Fault, Under Voltage), measurement of contact resistance and insulation resistance (Megger test), tightening of all control wiring terminations, and final testing of the breaker for smooth closing and tripping operations, complete as per standard specifications and the direction of the Engineer-in-Charge. |
| 12 | Testing, calibration, and commissioning of protective relays (Numerical / Electromechanical type) installed in 11kV Vacuum Circuit Breaker (VCB) panels. The scope includes secondary injection testing for overcurrent, earth fault, master trip (86), and trip circuit supervision (95) relays to verify pickup values and IDMT timing characteristics using a calibrated computerized test kit. The work includes checking trip logic, control wiring continuity, and submission of comprehensive test reports in triplicate, complete as per standard specifications and the direction of the Engineer-in-Charge |
| 13 | Design, manufacture, supply, installation, testing, and commissioning of 2000 X 2000 500 MM indoor type, free-standing, floor-mounted, totally enclosed, compartmentalized, cubicle type Main LT Panel. Fabricated from 2.0 mm thick CRCA sheet, powder-coated to approved shade. The panel shall be dust and vermin proof (IP-52/IP-54), having 600 A high-conductivity 04 nos of Aluminum busbars with color-coded and sleeved,. The work includes all internal wiring, control MCBs, CTs, digital multi-function meters, indication lamps, and accommodating specified incoming and outgoing switchgear (MCCBs), Making connection of outgoing cables. Includes provision of dual earthing terminals, and comprehensive testing (Megger, functional test) prior to commissioning, complete as per specifications and the direction of the Engineer-in-Charge |
| 14 | Supplying, Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.3.5x185 SQMM |
| 15 | Supplying and installation Testing comissioning of 630 A compact design on load manual handle change over switch with four pole, 415 volt complete as per standard specifications and direction of the Engineer-in-Charge.\\" Make ( Havells, HPL, L&T, Seimens, Schneider,C&S or equivalent Make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender