Tender For Upoha To Erection Of Monoliths And Peripheral Development At Lalpeth Monoliths, Dist. Chandrapur
Tender Value
85.60 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
15 days left
EMD
2.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upoha To Erection Of Monoliths And Peripheral Development At Lalpeth Monoliths, Dist. Chandrapur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the damaged old worn out, bulged, out of plumb, displaced portion of stair, removal of portion of dwarf boundary wall for installation of MS Gate and footing of MS Grill including stacking serviceable materials for its reuse & disposal of unserviceable materials including labour charges etc. |
| 2 | Earthwork in excavation by manual means in all kinds of soil for foundations of RCC footings, including dressing of sides, ramming of bottoms, dewatering wherever required, disposal of surplus excavated earth within 50 m lead and all lifts, complete. |
| 3 | Providing and laying plain cement concrete (1:4:8) using graded stone aggregate below RCC footing, including mixing, laying, compacting, curing and finishing complete. |
| 4 | Providing and laying reinforced cement concrete (1:2:4) for footing including vibration, curing and finishing complete, excluding reinforcement and formwork. |
| 5 | Providing, cutting, bending, binding and placing TMT reinforcement including binding wire, spacers, chairs and laps complete. |
| 6 | Providing and removing formwork for RCC footing, pedestal and anchor channel section including strutting, propping and all supports. |
| 7 | Providing, fabricating and erecting structural support system using hot-dip galvanized ISMB 300, base plates, gusset plates, stiffeners, anchor bolts and welded connections, fixed to RCC footing to provide concealed lateral support to the monolith with exposed steel to provide with zinc-rich primer and epoxy/polyurethane paint system. |
| 8 | Providing and Constructing CR Sandstone Masonry in foundation and plinth in Cement Mortar 1:6, using approved quality of sandstone blocks, including dressing of stones where required, packing all joints with mortar, curing, dewatering whenever required, all lead and lifts. |
| 9 | Providing and constructing fine-tooled ashlar sandstone masonry pedestal for displaying the name sculpture, name of the monument and Direction Signages matching the existing sculptures in Lime mortar of approved mix including dressing of stones, laying in regular courses, jointing, curing, engraving name in English and Hindi, infilling engraved letters with approved black epoxy pigment, Chamfering exposed edges with all lead and lifts complete. |
| 10 | Providing and laying machine dressed sandstone for flooring (Size- 0.30x0.45x0.10); Pathways (Size0.45x0.45x0.10); Platform over flooring(Size0.45x0.45x0.15); Entrance and Exit Steps (Size- 0.90x0.40x0.150) and Accessible Ramp with tactile tiles over prepared lime concrete bed including jointing with lime mortar, cutting, dressing and finishing complete. |
| 11 | Providing good earth, grading, preparation of soil, laying lawn, planting indigenous shrubs and trees, watering, maintenance during establishment period and complete landscape development around pathways and visitor areas. |
| 12 | Provision for Dismantling existing GI chain link fencing complete, including Chain Link Mesh in built up sections in angles, struts, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling concrete foundations of posts wherever required, carefully lowering, sorting and stacking serviceable materials within 50 m lead and disposing of unserviceable materials as directed by site-in-charge. |
| 13 | Provision of grill fencing of size 2M X 2M m having 4 Nos M.S. angle 50x50x5 mm of length 2 m, 2 Nos of MS Flat 50x5 mm, 18 Nos. 16 mm square bars of length 1.4 m of pointed tip pierced form top MS angle spacing 100mm c/c and screwing the MS grill with nut/ bolts with welded Laser Cut ASI logo complete. |
| 14 | Provision for supply and fixing of double panel MS angle gate of size 3.00x2.45 with wicket gate of size 1.2x2.0 m, 15 Nos. of MMS 16 mm dia square bar with pointed tip on each panel, MS angle of size 50x50x5 mm with double padlock and welded laser cut ASI logo complete. |
| 15 | Provision for painting steel work with delux multi surface paint to give an even shade. Two or more coat applied @ 0.90 lit / 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture. |
| 16 | Supplying, installing, testing and commissioning of one complete heritage façade illumination point comprising 45 W RGBW LED façade floodlight (IP-66, IK-08, DMX compatible) with die-cast aluminium housing, integral driver, mounting bracket, sandstone-clad RCC pedestal, anchor bolts, weatherproof junction box, HDPE protective conduit, XLPE armoured cable from nearest junction box, cable glands, waterproof connectors, earthing, excavation, backfilling, testing, commissioning, beam focusing and all accessories complete as directed by the Site-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender