Tender For Maintenance Of Furniture Held With Otms And Md Accn Under (Cg) Dhq-7 At Paradip Under Ge (I) (Cg) Bhubaneswar
Tender Value
26.23 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
16 days left
EMD
52460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance Of Furniture Held With Otms And Md Accn Under (Cg) Dhq-7 At Paradip Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to \\"Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) & Table Office clerk steel (FD-1004 ) by replacing following parts as shown in drawing :- |
| 2 | S & F in replacement of 18 mm thick prelaminated particle board of exterior grade of size (600X1200) mm top including PVC liping (18 X 1 mm thick) at all exposed surfaces. |
| 3 | S & F in replacement of Single drawer unit made of MS sheet of 20 gauge including apply of one coat of red oxide primer |
| 4 | S & F in replacement of PVC/ Rubber shoes for 25 Sq mm MS legs after cleaning rust and applying grease. |
| 5 | S & F in replacement of SS lock 6 lever with key (Make Harrison / Godrej / Link) |
| 6 | Repairs to \\"Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) & Table Office Officer Steel (FD-1002 ) as shown in drawing |
| 7 | S & F in replacement of 18 mm thick prelaminated particle board of exterior grade of size (1500 X 900) mm top including PVC liping (18 X 1 mm thick) at all exposed surfaces. |
| 8 | S & F in replacement of Single drawer unit made of MS sheet of 20 gauge including apply of one coat of red oxide primer |
| 9 | S & F in replacement of PVC/ Rubber shoes for 25 Sq mm MS legs after cleaning rust and applying grease. |
| 10 | S & F in replacement of SS lock 6 lever with key (Make Harrison / Godrej / Link) |
| 11 | Repairs to Rack Shoe (Drg No : FD/E6/MAP/02 ( R) and replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 12 | Removing old US MS shelf then S & F new MS shelf with 3 mm dia MS rods (9 X 3 nos at equal distance) to frame ( of size L 700 X B 300 ) made of 20 mm dia 18 gauge MS tube by welding to the existing legs. |
| 13 | Removing old US MS leg then S & F new 2060 mm (approx) long MS legs made of 20 mm Dia 18 gauge MS tube by welding to the existing shelves. |
| 14 | S & F in replacement of 20 mm dia rubber Shoes after cleaning rust and applying grease. |
| 15 | Repairs to \\"Almirah Steel Large with shelves (Drg No FD-1031\\" by S&F in replacement of following components as shown on drawing complete all as specified and directed Eng-in-Charge :- |
| 16 | Leg of Size (100 X 450 X 75mm) made of 2 mm thick MS Sheet apply of a coat of red oxide primer and including one coat of spray painting. |
| 17 | S&F in replacement of two way locking system with MS rod (with out Lock) . |
| 18 | S&F in replacement of washers and nut of handel and locking system including applying of grease. |
| 19 | S&F in replacement of 150 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge. |
| 20 | Removing of unserviceable lock then supply and fix new SS lock 6 lever with key (Make Harrison / Godrej / Link) |
| 21 | Repairs to \\" Almirah Steel Small with shelves (Drg No FD-1032) \\" & replacement of following components as shown on drg complete all as specified and directed :- |
| 22 | Leg of Size (100 X 450 X 75mm) made of 2 mm thick MS Sheet apply of a coat of red oxide primer and including one coat of spray painting. |
| 23 | S&F in replacement of two way locking system with MS rod (with out Lock) . |
| 24 | S&F in replacement of washers and nut of handel and including applying of grease |
| 25 | S&F in replacement of 150 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge. |
| 26 | Removing of unserviceable lock then supply and fix new SS lock 6 lever with key (Make Harrison / Godrej / Link) |
| 27 | Repairs to \\" Chair Varandha Steel (Drg No : FD/MAP-II/06) \\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 28 | 4 mm thick PVC Back & seat (As per drawing ) with ribs on back of seats (weight not less than 1.5 Kgs Each) |
| 29 | S&F in replacement of MS leg of chair vanrandah made of 20 mm dia 18 Gauge MS round tube |
| 30 | S&F in replacement of MS Seat and back of chair vanrandah as per drawing made of 20 mm dia 18 Gauge MS round tube |
| 31 | Supply and fixing (welding as per standard workmanship) of 01 number of 5 X 16 mm MS flat bar of 455 mm long (+- 5 mm) to side rails of seat at equal distance including a coat of red oxide primer and one coat of brush paint on steel surfaces and joints complete all as specified and directed by Engr-in-charge. |
| 32 | S & F in replacement of round PVC / rubber shoe for 20 mm dia MS legs after cleaning rust and applying grease of Chair Varandah FD/MAP-II/06 or FD-359. |
| 33 | Repairs to \\" Chair Varandha Steel (Drg No : FD-359) \\" & replacement of following components as shown on drg complete all as specified and directed :- |
| 34 | S & F for replacement of old unserviceable plastic newar / Plastic cane of varandah Chair with plastic cane of 4 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per mat pattern. |
| 35 | S&F in replacement of MS leg of chair vanrandah made of 20 mm dia 18 Gauge MS round tube |
| 36 | S&F in replacement of MS Seat and back of chair vanrandah as per drawing made of 20 mm dia 18 Gauge MS round tube |
| 37 | S & F in replacement of 10 mm MS rod welded to legs at front / back of Chair Varandah FD/MAP-II/06 or FD-359. |
| 38 | Repairs to \\" Bed Hard Steel (FD: E6/MAP/08/(R) \\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 39 | S&F in replacement of 12 mm BWR ply of size (850 X 1974)mm as per drawing including 08 nos of GI nuts and bolts |
| 40 | S&F in replacement of Particle board part of Head Rest of size (187 X 625 mm) made of 18 mm thick pre-laminated praticale board exterior grade of teak wood decorative face including 4 mm thick teakwood beading all around. |
| 41 | S&F in replacement of Particle board part of foot rest of size (226 X 638 mm) made of 18 mm thick pre-laminated praticale board exterior grade of teak wood decorative face including 4 mm thick teakwood beading all around. |
| 42 | S & F in replacement of PVC/ Rubber shoes for 38 Sq mm MS legs after cleaning rust and applying grease. |
| 43 | S&F in replacement of top rail of head rest / foot rest of 900 mm long made of 38 mm MS Square pipe of 18 Gauge |
| 44 | S&F in replacement of leg of head rest of 800 mm long made of 38 mm MS Square pipe of 18 Gauge |
| 45 | S&F in replacement of leg of foot rest of 500 mm long made of 38 mm MS Square pipe of 18 Gauge |
| 46 | S&F in replacement of stiffner of 824 mm long made of 25 mm MS Square pipe of 18 Gauge |
| 47 | S&F in replacement of head board horizontal rail of head rest of 624 mm long made of 24mm MS Square pipe of 18 Gauge includind 02 nos of 20 X 45 mm MS strip as shown on drawing. |
| 48 | S&F in replacement of head board vertica rail of head rest of 237 mm long made of 24mm MS Square pipe of 18 Gauge |
| 49 | S&F in replacement of foot board horizontal rail of head rest of 824 mm long made of 24mm MS Square pipe of 18 Gauge includind 02 nos of 20 X 45 mm MS strip as shown on drawing. |
| 50 | S&F in replacement of head board vertica rail of head rest of 616 mm long made of 24mm MS Square pipe of 18 Gauge |
| 51 | S&F in replacement of long rail of 1974 mm long made of 25 X 65 mm MS rectangular pipe of 18 Gauge as shown on drawing. |
| 52 | S&F in replacement of Short rail of 824 mm long made of 25 X 65 mm MS rectangular pipe of 18 Gauge as shown on drawing. |
| 53 | Repairs to \\" Charpoy with hard top (FD: ED/MAP-II/01) \\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 54 | S&F in replacement of 12 mm BWR ply of size (838 X 1916)mm as per drawing including 08 nos of GI nuts and bolts |
| 55 | S & F in replacement of PVC/ Rubber shoes for 32 Sq mm MS legs after cleaning rust and applying grease. |
| 56 | S & Fix 80 mm long GI nuts and 02 nos of bolts for Charpy with hard top (FD: ED/MAP-II/01) & Bed hard Steel (FD: E6/MAP/08/(R) in replacement of US nuts and bolts, complete all as specified and directed by Eng-in-Charg. |
| 57 | S&F in replacement of leg of 440 mm long made of 32 mm MS Square pipe of 18 Gauge |
| 58 | S&F in replacement of stiffner of 836 mm long made of 25 mm MS Square pipe of 18 Gauge |
| 59 | S&F in replacement of long rail of 1916 mm long made of 25 X 65 mm MS rectangular pipe of 18 Gauge as shown on drawing. |
| 60 | S&F in replacement of Short rail of 836 mm long made of 25 X 65 mm MS rectangular pipe of 18 Gauge as shown on drawing. |
| 61 | Repairs to \\" Chair writing steel (FD: ED/E6/MAP/12) \\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 62 | S&F in replacement of Hand rest made out of black integral shin made out of polyurethane with 75-85 shore \\"A\\" hardness and reinforced with MS insert, weather and scrach resisrant, with minimum 230 mm high as per drawing with necessary nuts and bolts |
| 63 | S&F in replacement of PVC stopper for 25 X 10 mm cantilever type MS tube with necessary fitings |
| 64 | S&F in replacement of cloth cover of seat and back with 1.5 to 2mm thick polyster fabric cover including PVC lipping as existing |
| 65 | S&F in replacement of canti liver type powder coated MS Tubular Frame made out of 25 X 10 mm heavy grade tube of 1 to 1.6 mm wall thickness as per existing |
| 66 | S&F in replacement of countered lumber support to back of chair as per existing shape and size |
| 67 | S&F in replacement of seat of size 500 X 450 mm and made of 120 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping allround as explained in drawing. |
| 68 | S&F in replacement of back of size 500 mm long and 500 mm at base but 350 at top made of 120 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping allround as explained in drawing. |
| 69 | Repairs to \\"Chair Computer (FD: ED/E6/MAP/12)\\" and revolving chairs (TP) (Equivalent to Chair Computer ) & replacement of following components as shown on drg complete all as specified and directed :- |
| 70 | S&F in replacement of Hand rest of black integral shine made out of polyurethane with 75-85 shore \\"A\\" hardness and reinforced with MS insert with minimum 230 mm high hand rest incliding necessary fittings |
| 71 | S&F in replacement of Pedestal assembly of Chair Computer of injection moulded in black 30% glass filled nylon, 10.5 mm dia forged bright zinc plated 600 mm pitch-center dia with press fitted 05 nos of castors (ISI Marked) |
| 72 | S&F in replacement of Seat of Chair Computer of size 510 X 470 X 60 mm along with MS holder for lift operation and fixing of seat with hydraulic system as described in drawing, complete all as specified and directed by Engr-in-charge. |
| 73 | S&F in replacement of Back rest of Chair Computer and fixing new back rest of approx size (510 mm D X 600 mm H X 60 mm Thick) with contour lumber support and hight adjustment handel as described in drawing |
| 74 | S&F of Hydraulic system (ISI Marked) as per drawing / existing |
| 75 | Repairs to \\" Table bed side (Drg No FD/E6/MAP/15 (R) \\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 76 | Material & labour for removing the unserviceable fancy handel with new SS handel of 75 mm long as existing on ground , complete all as specified and directed by Engr-in-Charge. |
| 77 | Material & labour for removing the unserviceable back ply and fixing new 12mm thick BWR back ply of size (400 X 420) mm, complete all as specified and directed by Engr-in-Charge. |
| 78 | S7F 18 SqMM Square PVC/Rubber shoe to 18 Sq mm MS legs |
| 79 | S&F of Top of size ( 450 X 500 mm) of 18 mm thick pre laminated particle board exterior grade of teak wood face with 0.8 to 0.1 mm thick matching PVC edging all round. |
| 80 | S&F of Side/ back of size ( 314 X 414 mm) of 18 mm thick pre-laminated particle board exterior grade of teak wood face with 0.8 to 0.1 mm thick matching PVC edging all round. |
| 81 | S&F of Front of Lower Drawer of size ( 250 X 414 mm) of 18 mm thick pre-laminated particle board exterior grade of teak wood face with 0.8 to 0.1 mm thick matching PVC edging all round. |
| 82 | S&F of Front of Upper Drawer of size ( 100 X 414 mm) of 18 mm thick pre-laminated particle board exterior grade of teak wood face with 0.8 to 0.1 mm thick matching PVC edging all round. |
| 83 | S&F inner part of Upper drawer (Over all size 100 X 414 X 414 mm) made of 12 mm thick BWR Plywood with 02 Sides , 01 Back and 01 Bottom including a pair of side mounted manual telescopic channel of required size |
| 84 | S&F inner part of Lower drawer (Over all size 250 X 414 X 414 mm) made of 12 mm thick BWR Plywood with 02 Sides , 01 Back and 01 Bottom including side mounted manual telescopic channel of required size |
| 85 | S&F 18Sqmm MS front leg of 500 mm long painted with black Synthetic enamel paint after removing the US leg |
| 86 | S&F 18Sqmm MS Back leg of 600 mm long painted with black Synthetic enamel paint after removing the US leg |
| 87 | S&F 18Sqmm MS Side bar of 414mm long painted with black Synthetic enamel paint after removing the US Side bar |
| 88 | Repairs to \\" Table Centre Drawing No FD- 274\\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 89 | Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board exterior grade of teak wood decorative face including 4 mm thick teakwood beading all around |
| 90 | 1st class seasoned teak wood leg of size 30 X 60 X 380 mm as per drawing |
| 91 | All as per Sl No 13.02 but long rail of size 20 X 50 X 850 mm |
| 92 | All as per Sl No 13.02 but short rail of size 20 X 50 X 420 mm |
| 93 | All as per Sl No 13.02 but stifner of size 20 X 50 X 420 mm |
| 94 | Repairs to \\"Chair School with hand Board Drg No : FD/E6/MAP/05)\\" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 95 | S&F in replacement of 18 mm thick prelaminated particle board exterior grade of size (300 X 585) mm top including all round PVC liping 0.8 to 1 mm thick and including MS hollow pipe and necessary fittings as required |
| 96 | S&F in replacement of 25 mm round PVC Shoes |
| 97 | S&F in replacement of PVC Seat of 04 mm thick including necessary fittings |
| 98 | S&F in replacement of MS Frame of Chair including necessary fittings as specified in drawing |
| 99 | S&F in replacement of MS Book Shelf as specified in drawing |
| 100 | S&F in replacement of Stainless Steel Pegs (Minimum 120 mm long) including fixing by screws, complete all as specified and directed by Eng-in-Charge. |
| 101 | Material & labour for removing of unserviceable caning of Chair Easy (Drg No FD-229) then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane at Godrej pattern, complete all as specified and directed by Engr-in-Charge. |
| 102 | Material & labour for removing of unserviceable hand rest of Chair Easy (Drg No FD-229) then supply and fix new stiffner made of 1st class seasoned teak wood of size590 mm long out of 65 X 25 mm as per drawing, Complete all as specified and directed by Eng-in-charge. |
| 103 | Repairs to \\"Chair Dining Officers (Drg No : FD/MAP-II/04)\\" by S&F in replacement of following components as shown on drg complete all as specified and directed :- |
| 104 | Seat cushion of 75 mm thick 40 Density of size 450 X 450 mm along with leatherised rexine fabric (costing not less than Rs 350/- per meter) cover after fixing to 12 mm thick BWR plywood with staples as per drawing |
| 105 | 1st class seasoned teak wood rear leg of size 30 X 50 X 950 mm |
| 106 | S & F in replacement of front leg of size 30 X 50 X 950 mm |
| 107 | S & F in replacement of rail of size 65 X 25 X 450 mm |
| 108 | S & F in replacement of back rest of size 25 X 45 X 450 mm |
| 109 | S & F in replacement of ver srtip of size 30 X 15 X 600 mm |
| 110 | S & F in replacement of stiffner of size 20 X 25 X 450 mm |
| 111 | Repairs to \\"Table peg (FD-384) by S&F in replacement of following components as shown on drg complete all as specified and directed :- |
| 112 | Material & labour for removing of unserviceable top of Table Peg (FD-384) then supply and fix new top ( 450 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed by Engr-in-Charge. |
| 113 | S & F in replacement of 1st class seasoned teak wood Leg of Size 30 X 50 X 380 mm as per drawing. |
| 114 | S & F in replacement of 1st class seasoned teak wood bottom Rail / stiffner of size 30 X 40 X 280 mm as per drawing. |
| 115 | S & F in replacement of 1st class seasoned teak wood Top Rail of size 20 X 40 X 430 mm as per drawing. |
| 116 | S & F in replacement of 5 mm nylon buffer |
| 117 | Repairs to \\"Teapoy (FD-382) by S&F in replacement of following components as shown on drg complete all as specified and directed :- |
| 118 | Material & labour for removing of unserviceable top of Teapoy (FD-382) then supply and fix new top ( 450 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 18 X 4 mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed by Engr-in-Charge. |
| 119 | S & F in replacement of 1st class seasoned teak wood Leg of Size 30 X 60 X 540 mm as per drawing. |
| 120 | S & F in replacement of 1st class seasoned teak wood bottom Rail / stiffner of size 20 X 50 X 420 mm as per drawing. |
| 121 | S & F in replacement of 1st class seasoned teak wood Top Rail of size 20 X 50 X 570 mm as per drawing. |
| 122 | S & F in replacement of 5 mm nylon buffer |
| 123 | Repairs to \\"Table writing (Drg No : FD-275)\\" by S&F in replacement of following components as shown in drawing complete all as specified and directed by Engr-in-Charge :- |
| 124 | S & F in replacement of Top ( 1145 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 18 X 4 mm thick well polished teak wood beading all around. |
| 125 | S & F in replacement of 1st class seasoned teak wood leg of size 35 X 55 X 760 mm as per drawing |
| 126 | S & F in replacement of 1st class seasoned teak wood long rail / center stiffner of size 25 X 50 X 1100 mm as per drawing |
| 127 | S & F in replacement of 1st class seasoned teak wood short rail / side stiffner of size 25 X 50 X 550 mm |
| 128 | S & F in replacement of 18 mm thick 430 mm long MS piano hinges and 10 numbers of SS screws of 15 mm long |
| 129 | S & F in replacement of 12 mm thick back Plywood of size 400 X 600 mm incloding SS screws of 15 mm long |
| 130 | S & F in replacement of 12 mm thick Side Plywood of size 600 X 600 mm incloding SS screws of 15 mm long |
| 131 | S & F in replacement of total set of upper drawer unit of over all dimention 110 H X 360 W X 500 D mm including a pair of side mounted manual telescopic channel of required size |
| 132 | S & F in replacement of bottom drawer door of size (350 X 420 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 18 X 4 mm thick well polished teak wood beading all around. |
| 133 | S & F in replacement of 75 mm long fancy stainless steel handel with 02 numbers of SS screws |
| 134 | Removing old hinges then S & F in replacement new Stainless Steel 304 Grade Anti Rust Full Overlay '0' Crank Hydraulic Soft Close Auto Hinges to fix doors including screws, complete all as specified and directed by Engr-in-Charge. |
| 135 | S & F in replacement of 5 mm nylon buffer |
| 136 | Repairs to \\"Mirror Dressing Gents (Drg No : FD/E6/MAP/18) by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 137 | S & F in replacement of 5 mm thick electro copper plated mirror of polished sheet glass of size 1200 X 600 mm with well polished 30 X 15 mm teak wood beading all round including magnetic door holder and hinges and 12 mm thick BWR Plywood, all as per drawing, complete all as specified and directed by Engr-in-Charge. |
| 138 | Repairs to \\"Table Dressing including Stool (Drg No : FD/MAP-II/07) by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 139 | S & F in replacement of 5 mm thick electro copper plated mirror of polished sheet glass of size 1300 X 450 mm with well polished 20 X 25 mm teak wood beading all round and including 12 mm thick BWR Plywood, all as per drawing, complete all as specified and directed by Engr-in-Charge. |
| 140 | S & F in replacement of Horizontal Support of 1st class seasoned teak wood of size 30 X 20 X 450 mm |
| 141 | S & F in replacement of Vertical Support of 1st class seasoned teak wood of size 30 X 45 X 1600 mm |
| 142 | S & F in replacement of Frame member of 1st class seasoned teak wood beading out of 20 X 25 mm solid wood all round the mirror i.e. a perimeter of 3500mm |
| 143 | S & F in replacement of Left and Right top of size (350 X 380 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 144 | S & F in replacement of centre top of size (450 X 380 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 145 | S & F in replacement of Left and Right door of size (350 X 400 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 146 | S & F in replacement of back of size (1150 X 550 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 147 | S & F in replacement of total set of top drawer unit of over all dimention 100 H X 350 W X 400 D mm including a pair of side mounted manual telescopic channels |
| 148 | S & F in replacement of 18 mm thick 380 mm long MS piano hinges and 06 numbers of SS screws of 15 mm long |
| 149 | S & F in replacement of 75 mm long fancy stainless steel handel with 02 number of SS screws |
| 150 | S & F in replacement of Heavy Duty revolving nylon double wheels |
| 151 | S & F in replacement of Left and Right side of stool of size (330 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 152 | S & F in replacement of front / back of stool of size (400 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 153 | S & F in replacement of bottom of stool of size (330 X 420 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 154 | S & F in replacement of Top of stool of size (330 X 420 mm) of 12 mm thick BWR Plywood with a folding handle and 20 X 20 mm runner all around to be fixed to the wall of stool for resting of the top, Complete all as directed and specified by Engr-in-Charge. |
| 155 | S & F in replacement of seat cushion with cover then supply and fix new 75 mm thick 40 Density cushion of size 350 X 440 mm along with fabric (costing not less than Rs 350/- per meter) cover (Three side chain type) as per drawing, Complete all as specified and directed by Eng-in-charge. |
| 156 | Removing old hinges then S & F in replacement new Stainless Steel 304 Grade Anti Rust Full Overlay '0' Crank Hydraulic Soft Close Auto Hinges to fix doors including screws, complete all as specified and directed by Engr-in-Charge. |
| 157 | Repairs to \\"Table Computer (Drg No : FD/E6/MAP/03) & replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 158 | S & F in replacement of top of size (565 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick to the exposed surface. |
| 159 | S & F in replacement of shelf of size (450 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick to the exposed surface. |
| 160 | S & F in replacement of side of shelf of size (300 X 230 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick to the exposed surface. |
| 161 | S & F in replacement of side of size (150 X 650 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around. |
| 162 | S & F in replacement of pull out tray of size (150 X 450 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick all around including accessories for pulling. |
| 163 | S & F in replacement of total set of top drawer unit of over all dimention 75 H X 150 W X 450 D mm including a pair of side mounted manual telescopic channels |
| 164 | S & F in replacement of key pad of size 450 X 480 mm including a pair of side mounted manual telescopic channels |
| 165 | Material & labour for removing of unserviceable handel then supply and fix 75 mm long fancy stainless steel handel with 02 number of SS screws |
| 166 | Repairs to Bin Linen Multipurpose (FD/E6/MAP/09) and replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 167 | S & F in replacement of top / bottom of size (1200 X 450 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 168 | S & F in replacement of horizontal shelf of size (450 X 800 mm) of 18 mm thick pre laminated particle board of teakwood face exterior gradeincluding 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 169 | S & F in replacement of vertical support of size (639 X 450 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 170 | S & F in replacement of side of size (450 X 650 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 171 | S & F in replacement of door of size (520 X 400 mm) of 18 mm thick pre laminated particle board of teakwood face exterior gradeincluding 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 172 | S & F in replacement of door of size (450 X 800 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 173 | S & F in replacement of horizontal shelf of size (420 X 400 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 174 | S & F in replacement of 75 mm high leg of size (2X 1150 L, 2 X 450 D mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 06 nos of 12 mm high nylon buffers and 18 X 4 mm thick well polished teakwood beading facing floor and 04 Nos of 25 X 25 X 410 mm hard wood support. |
| 175 | S & F in replacement of back plywood of size (1200 X 750 mm) of 12 mm thick BWR Plywood including 12 nos of 15 mm screws. |
| 176 | S & F in replacement of total set of top drawer unit of over all dimention (400 W X 100 H X 450 D mm) including a pair of side mounted manual telescopic channels made of 18 mm thick prelaminated particle board and 12 mm thick BWR plywood. |
| 177 | Removing old hinges then S & F in replacement new Stainless Steel 304 Grade Anti Rust Full Overlay '0' Crank Hydraulic Soft Close Auto Hinges to fix doors including screws, complete all as specified and directed by Engr-in-Charge. |
| 178 | Repairs to Side Board (Drg No : FD-1112) and replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 179 | S & F in replacement of top / bottom of size (1025 X 450 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 180 | S & F in replacement of horizontal shelf of size (450 X 750 mm) of 18 mm thick pre laminated particle board of teakwood face exterior gradeincluding 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 181 | S & F in replacement of vertical support of size (590 X 426 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 182 | S & F in replacement of side of size (450 X 675 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 183 | S & F in replacement of door of size (325 X 675 mm) of 18 mm thick pre laminated particle board of teakwood face exterior gradeincluding 18 X 4 mm thick well polished teakwood beadingto the exposed surface. |
| 184 | S & F in replacement of 75 mm high leg of size (2X 1000 L, 2 X 450 D mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 06 nos of 12 mm high nylon buffers and 18 X 4 mm thick well polished teakwood beading to the side facind floor and 04 Nos of 25 X 25 X 410 mm hard wood support. |
| 185 | S & F in replacement of back plywood of size (1025 X 675 mm) of 12 mm thick BWR Plywood including 12 nos of 15 mm screws.. |
| 186 | S & F in replacement of total set of drawer unit of over all dimention (325 W X 156 H X 400 D mm) including a pair of side mounted manual telescopic channels made of 18 mm thick prelaminated particle board and 12 mm thick BWR plywood. |
| 187 | Removing old hinges then S & F in replacement new Stainless Steel 304 Grade Anti Rust Full Overlay '0' Crank Hydraulic Soft Close Auto Hinges to fix doors including screws, complete all as specified and directed by Engr-in-Charge. |
| 188 | S & F in replacement new Stainless Steel 304 Grade Anti Rust 150 mm long fancy handels including screws, complete all as specified and directed by Engr-in-Charge. (For side board and Bin linen multi purpose) |
| 189 | Repairs to Teapoy varandah (Drg No : FD/E6/MAP/17) and replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 190 | S & F in replacement of top of size (400 X 700 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 191 | Removing old US MS top frame then S & F new MS top frame ( of size L 602 X B 350 ) made of 18 Sq MM tube of wall thickness 1.6 mm by welding to the existing legs. |
| 192 | Removing old US MS leg then S & F new 522 mm long MS leg made of 18 Sq MM tube of wall thickness 1.6 mm by welding to the existing legs. |
| 193 | Removing old US bar base tray then S & F 5 mm dia MS Bar base tray (12 X 10 Nos at equal distance) frame ( of size L 650 X B 350 ) made of 18 Sq MM tume of wall thickness 1.6 mm by welding to the existing legs |
| 194 | S & F in replacement of 18 Sq mm rubber Shoes after cleaning rust and applying grease. |
| 195 | Repairs to \\"Table dining 6 Person (FDMAP-II/03) by S&F in replacement of following components as shown on drg complete all as specified and directed :- |
| 196 | S & F for replacement of old unserviceable top of Table Dining 6 seater (FD/E6/MAP-II/03) with new Top (1500 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 22 X 45 mm thick wood beadings on short side and 18 X 4 mm thick well polished teak wood beading on long side and fixing to the table by screwing to short rail, all as per drawing complete all as specified and directed by Engr-in-Charge. |
| 197 | S & F in replacement of 1st class seasoned teak wood Leg of Size 90 X 45 X 750 mm as per drawing. |
| 198 | S & F in replacement of 1st class seasoned teak wood Short Rail / stiffner of size 90 X 45 X 900 mm as per drawing. |
| 199 | S & F in replacement of 1st class seasoned teak wood Long Rail of size 90 X 45X 1500 mm as per drawing. |
| 200 | S & F in replacement of 5 mm nylon buffer |
| 201 | S & F in replacement of MS right angle 150 X 30 X 5 mm including Screws |
| 202 | Repairs to \\"Table dining 4 Person (FDMAP-II/03) by S&F in replacement of following components as shown on drg complete all as specified and directed :- |
| 203 | S & F for replacement of old unserviceable top of Table Dining 4 seater (FD/E6/MAP-II/03) with new Top (1200 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 22 X 45 mm thick wood beadings on short side and 18 X 4 mm thick well polished teak wood beading on long side and fixing to the table by screwing to short rail, all as per drawing complete all as specified and directed by Engr-in-Charge. |
| 204 | S & F in replacement of 1st class seasoned teak wood Leg of Size 90 X 45 X 750 mm as per drawing. |
| 205 | S & F in replacement of 1st class seasoned teak wood Short Rail / stiffner of size 90 X 45 X 900 mm as per drawing. |
| 206 | S & F in replacement of 1st class seasoned teak wood Long Rail of size 90 X 45X 1200 mm as per drawing. |
| 207 | S & F in replacement of 5 mm nylon buffer |
| 208 | S & F in replacement of MS right angle 150 X 30 X 5 mm including Screws |
| 209 | Material & labour for removing of unserviceable caning of Dining (Drg No FD-279) then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane at Godrej pattern, complete all as specified and directed by Engr-in-Charge. |
| 210 | Material & labour for removing of unserviceable stiffner of table dining FD-279 then supply and fix new stiffner made of 1st class seasoned teak wood of size 590 mm long out of 65 X 25 mm as per drawing, Complete all as specified and directed by Eng-in-charge. |
| 211 | Repairs to \\"Chair Dining OR (Drg No : FD/E6/MAP/05)\\" & replacement of following components as shown on drg complete all as specified and directed :- |
| 212 | M&L for removing of Old unserviceable PVC Seat of dining Chair then S & F new PVC Seat with necessary stainless steel screws |
| 213 | M&L for S & Fof two new 440 X 25 X 5 mm flat iron plate (Single brush painted over a coat of red oxide primer) with two holes at each end to the side rails of dining chair after minor cutting of the PVC seat for adjustment after bending at required length including 08 nos of 1 inch stainless steel screws and washer at the bottom of PVC seat of the chair |
| 214 | Repairs to \\"Table 900 X 600 with draw FD-1008 and Table 900 X 600 FD-1007 by S&F in replacement of following components as shown on drg complete all as specified and directed :- |
| 215 | S & F in replacement of top of size (600 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with PVC beading of 0.7 to 1 mm thick to the exposed surface. |
| 216 | S&F in replacement of leg of 760 mm long made of 25 mm MS Square pipe of 18 Gauge |
| 217 | S&F in replacement of long rail / centre stiffner of 750 mm long made of 25 mm MS Square pipe of 18 Gauge |
| 218 | S&F in replacement of short rail / side stiffner of 450 mm long made of 25 mm MS Square pipe of 18 Gauge |
| 219 | S & F in replacement of PVC/ Rubber shoes for 32 Sq mm MS legs after cleaning rust and applying grease. |
| 220 | Repairs to Book Shelf (Drg No : FD-355) and replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 221 | S & F in replacement of top / bottom of size (1230 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 222 | S & F in replacement of side / centre partition of size (660 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 223 | S & F in replacement of shelf of size (380 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 224 | S & F in replacement of shelf of size (792 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 225 | S & F in replacement of shelf of size (474 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 226 | S & F in replacement of partion shelf of size (408 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade including 18 X 4 mm thick well polished teakwood beading to the exposed surface. |
| 227 | S & F in replacement of back plywood of size (1230 X 660 mm) of 12 mm thick BWR Plywood including 12 nos of 15 mm screws.. |
| 228 | S & F in replacement of legs of size 1230 mm long made out of 50 X 100 mm teak wood |
| 229 | Repairs to \\"Chair Dining OR (Drg No : FD-279)\\" & replacement of following components as shown on drg complete all as specified and directed :- |
| 230 | Material & labour for removing of unserviceable caning of Chair Dining OR (Drg No FD-279) then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane at Godrej pattern, complete all as specified and directed by Engr-in-Charge. |
| 231 | Material & labour for removing of unserviceable stiffner of Chair Dining OR (Drg No FD-279)then supply and fix new stiffner made of 1st class seasoned teak wood of size 20 X 25 X 440 mm as per drawing, Complete all as specified and directed by Eng-in-charge. |
| 232 | Repairs to \\" Table bed side (Drg No FD-76\\" & replacement of following components as shown on drg complete all as specified and directed :- |
| 233 | S&F for replacement of old unserviceable with new side of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 510 X 230 mm with 4mm teakwood beading 510 mm long, complete all as specified and directed by Eng-in-Charge. |
| 234 | S&F for replacement of old unserviceable with new top/middle self / bottom of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 450 X 230 with 4mm teakwood beading 450 mm long, complete all as specified and directed by Eng-in-Charge. |
| 235 | AS&F for replacement of 12 mm BWR back ply of size (510 X 450) mm |
| 236 | Replacement of plastic receptacle with new 20 liter plastic receptacle with Step-On Pedal (Cello/Milton/Supreme) |
| 237 | Supply , fixing & setting of 100 mm thick (40 density) foam cusion (Kurlon /Sleepwell/ Feather Foam) for seat of Sofa set four / five / single seater (FD-281,FD/MAP-II/02) of approved quality as per Drg, complete all as specified and directed. |
| 238 | Supply , fixing & setting of cover of cushion of size 21\\" X 22\\" X 4\\" made of tapestry cloth (Costing not less than Rs 320 per meter) of approved quality and providing zip on 03 sides excluding one side for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed. |
| 239 | Material & labour for fixing of 18 X 4 mm thick teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture including polishing complete all as specified and directed. |
| 240 | M&L for removing dirt and dust by using sand paper and smothening the surface by applying putty where ever required and the applying redoxide primer on the smoothen surface of the following steel furniture and apply one coat of spray painting of synthetic enamel paint on all exposed surfaces (Colour as decided by Eng-in-Charge) as per drg complete all as specified and directed :- |
| 241 | All as described at sl No 40.00 above for \\"Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) & Table Office clerk steel (FD-1004 ) |
| 242 | All as described at sl No 40.00 above for \\"Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) & Table Office Officer Steel (FD-1002 ) |
| 243 | All as described at sl No 40.00 above for \\" Almirah Steel Large with shelves (Drg No FD-1031)\\" |
| 244 | All as described at sl No 40.00 above for \\" Almirah Steel Small with shelves (Drg No FD-1032) \\" |
| 245 | All as described at sl No 40.00 above for \\" Locker Steel ( Drg No : CWE(P)V/SK/18) \\" |
| 246 | All as described at sl No 40.00 above for \\" Teapoy Varandha Steel (Drg No : FD/E6/MAP/17)\\" |
| 247 | All as described at sl No 40.00 above for \\" Chair Varandha (Drg No : FD/MAP-II/06) \\" & \\" Chair Varandha (Drg No : FD-359) \\" |
| 248 | All as described at sl No 40.00 above for \\" Metal Shelving Racks of Size 1875 X 900 X 500 mm\\" |
| 249 | All as described at sl No 40.00 above for \\" Side rack with Tray \\" |
| 250 | All as described at sl No 40.00 above for \\" Table with drawer 600 X 900 FD-1008 \\" |
| 251 | All as described at sl No 40.00 above for \\" Table without drawer 600 X 900 FD-1007 \\" |
| 252 | All as described at sl No 40.00 above for \\" Rack Shoe Steel FD/E6/MAP/02/R \\" |
| 253 | All as described at sl No 40.00 above for \\" Charpoy Steel (FD: ED/MAP-II/01 \\" |
| 254 | All as described at sl No 40.00 above for \\" Bed Hard Steel (FD: E6/MAP/08(R)) \\" |
| 255 | All as described at sl No 40.00 above for \\"Chair CB Steel with arm or without arm\\" |
| 256 | M & L for French polishing to wooden furniture after removing the dirt and dust using mechanical grinder and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed by Engr-in-Charge |
| 257 | All as described as per Item No. 41.00 hear-in above for \\" Table Centre Drawing No FD- 274\\" |
| 258 | All as described as per Item No. 41.00 hear-in above for \\"Chair Dining Officers (Drg No : FD/MAP-II/04)\\" |
| 259 | All as described as per Item No. 41.00 hear-in above for \\"Chair Dining OR (Drg No : FD-279 /228)\\" |
| 260 | All as described as per Item No. 41.00 hear-in above for \\" Table dining 6 person (Drg No FD/ MAP-II/03)\\" |
| 261 | All as described as per Item No. 41.00 hear-in above for \\" Table dining 4 person (Drg No FD/ MAP-II/03)\\" |
| 262 | All as described as per Item No. 41.00 hear-in above for \\" Table Peg (Drg No FD-384) \\" |
| 263 | All as described as per Item No. 41.00 hear-in above for \\" Teapoy (Drg No FD-382) \\" |
| 264 | All as described as per Item No. 41.00 hear-in above for \\"Table writing (Drg No : FD-275)\\" |
| 265 | All as described as per Item No. 41.00 hear-in above for \\" Chair Easy (Drg No FD-229)\\" |
| 266 | All as described as per Item No. 41.00 hear-in above for \\" Chair Writing (Drg No FD-280)\\" |
| 267 | All as described as per Item No. 41.00 hear-in above for \\" Sofa Five Seater FD- 281 & FD / MAP-II/02\\" |
| 268 | All as described as per Item No. 41.00 hear-in above for \\" Sofa Four Seater FD- 281 & FD / MAP-II/02\\" |
| 269 | All as described as per Item No. 41.00 hear-in above for \\" Sofa Single Seater FD- 281 & FD / MAP-II/02\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender