Tender For Providing Of Vaccum Circuit Breaker Of 11 Kv At Anupgarh Under Ge Af Suratgarh
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
5 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Vaccum Circuit Breaker Of 11 Kv At Anupgarh Under Ge Af Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Sep-2026 | amendment | Other | 29-Sep-2026 |
| 2 | 21-Sep-2026 | revisedboq | BOQ | 29-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil. |
| 2 | All as described in serial item No. 1 above, but depth exceeding 1.5 m and not exceeding 3 m complete all as specified |
| 3 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick. |
| 4 | Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 5 | M&L for sand for cousioning at cable trenches inside substation bulding all as specified and directed by Engr-in-Charge |
| 6 | Supply, laying and testing in trenches or passing through pipe or duct , XLPE PVC insulated (heavy duty) galvanised steel strip or wire armoured electric cable 11000Volt (E) Grade with stranded aluminium conductor for cross sectional area 95 sqmm 3 core complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply and fix HDPE Double wall corrugated pipe (DWC) conforming to IS-14930(Part-II) of size-110mm including snap fit coupler as required, for cable protection complete all as specified and directed. |
| 8 | PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed. |
| 9 | S&F Cable joining kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with joining material and accessories suitable for 3 core XLPE armoured aluminium conductor cable suitable for 95 sqmm. |
| 10 | S&F Cable joining kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with joining material and accessories suitable for 3 core XLPE armoured aluminium conductor cables uitable for 95 sqmm. |
| 11 | Supply , install, testing and commissioning of outdoor one incomming and one outgoing Panel type vacuum circuit breaker for capacity 11 KV, 400 Amp, 3 Phase, 3 wire, 50 Hz, 26.3 kA for 1 sec breaking capacity SF6 type totally enclosed single bus bar for each phase, floor mounting, Draw out type,110V DC shunt tripping & closing coil, Inbuilt Anti-pumping feature, Spring charging motor manually and auto arrangement, rated 230V AC with Spring charge indicator, Auxiliary contacts: 6No+6NC, Automatic Safety shutters, Mechanicaly on/off push buttons, operation counters, True close door operation, Test/Service indication, Internal Arc flash tested Panel with accessories : Rack in rack out handle, Spring charge Handle, Trip Rod. incl all manufacturer's standard fitting and accessories of following specification all as specified and as directed by Engr-in-charge including necesarry civil work for VCB. Make:L&T (Cat No. (CDBBN311OOBN1D)/Simens/ Crompton Greeves/ABB/Schneider |
| 12 | A) Specification for VCB(i) Bus bar chamber with 3 phase copper bus bar of suitable rating duly insulated - 01 set ( set of three). (ii) Electrical trip coil 110 V DC - 1 No(iii) Electrical shunt coil 110 V DC – 01 No (iv) CT Chamber incorporating 3 Nos single phase rasin cast current transformer ratio 100/5A- class 1.0, 15VA for metering & class 5P10, 15VA for protection and burdon - 3 Nos Make: (ECS/Pragati/NPTL/Saviour) (v) 3 Phase, potential transformer, ratio 11KV/√3/110V/√3 AC , Core1: CL 1.0, 50VA and Core 2: CL 3P, 50 VA fixed type - 03 No. Make: (ECS/Pragati/NPTL/Saviour) (vi) Three phase over current (O/C) and One earth fault (E/F) relay digital numerical Communicale Non-Directional with protection (50,50N,51,51N) and Aux. Voltage 110V DC - 01 No Make: (Avana/Ashida/C&S)(vii) Three phase Over Voltage and under Voltage realy with protection (27,59) and Aux Voltage 110V DC -01 No Make:(Avana/Ashida/C&S)(viii) Aux relay for Transformer Protection with protection (63) Aux. Voltage 110 DC- 02 No Make:(Avana/Ashida/C&S)(ix) Master Trip relay with protection (86) and Aux voltage 110 DC-01 No Make:(Avana/Ashida/C&S) |
| 13 | (x) Trip Circuit Supervision relay with protection (95) and aix Voltage 110 DC - 01 No Make:(Avana/Ashida/C&S)(xi) Digital Ammeter with inbuilt Selector Switch for 3 phase -01 No. Make: L&T/Secure(xii) Digital voltmeter with Inbuilt Selector Switch for 3 phase - 01 No Make: L&T/Secure(xiii) Digital Multifunction Meter for amps, volts, KW, KVA, KVAR, and PF type - 01 No Make: L&T/Secure(xiv) Plug and Socket 5/15Amps - 01Nos Make:Anchor/Havells (xv) Power Pack unit, I/C 230V AC, O/G:110V DC - 01 No back time one hour.(xvi) Thermosate- 1 Nos (xvii) Space heater- 2 Nos (xviii ) Emergency Push Button - 1 No Make:Teknic(xix) Indicating lamp - 8 No Make: teknic/L&T(xx) 8 window Annunciator. Make: Alan/Minilec(xxi) Hooter - 01 No Make: Alan/Minilec(xxii) L/R Switch- 01 Make:Salzer/Teknic(xviii) TNC Switch, Pistol grip handle, Spring return to neutral -01 No Make:Salzer/Teknic(xxiv) Door Limit Switch 2A, Push to Off - 01 No Make:Salzer/Teknic(xxv) DC Control Contractor -110V DC - 02 Nos. Make: L&T(xxvi) 16A DP MCB -01 No Make: L&T(xxvii) 6A DP MCB- 5 No Make : L&T(xxviii) 2A P MCB- 02 Nos Make: L&T(xxix) Fabrication with Powder Coating including Wires and Electrolytic grade Al. Bus Bar and Miscellaneous Items - One Job |
| 14 | Material and labour for chemical earthing using outer & Inner pipe of copper as earthing electrodes and hydroscopic jelly back fill for.good conductivity complete all as directed (Dia of outer pipe shall be 65 mm; dia of inner pipe shall be 40 mm, length shall be 3 Mtrs, thickness of both pipes shall be 2.1 mm and made of minimum 95% copper metal) including copper earth strip of size 32x6 mm earth electrode to test point by means of brazing, bolts, nuts washer and check nut of brass, connected with in and including test point of bronze and 40mm GI pipe upto 7.5 Mtr with copper testing point complete with PCC earth pit and 50 mm thick RCC pit cover using 20 mm graded crushed stone aggregate with TMT reinforcement bar 8 mm dia @ 150 mm center to center both ways, MS handle 10 mm dia made to shape with 50 x 50 x 6 mm angle iron frame duly painted, earth work in any type of siol connected to earthing test point and testing complete all as specified and as directed. Note:- Copper strip beyond 7.5 rntr shall be measured and paid separately under relevant items of Sch 'A' Make: Orn Electrotech/OBO/ENOV/ TIRUPATI/ POWERTRACK. |
| 15 | Material and labour for MS plate of size 5 mm thick laid over cable ducts as duct cover with handle complete all as specified and directed by Engr-in -charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Sep 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender