Tender For Special Repairs To Building Nop-91 At Afac Coimbatore
Tender Value
58.23 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
3 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building Nop-91 At Afac Coimbatore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | Material & Labour for Rendering with WPC in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately |
| 3 | Material & Labour for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 4 | Material & Labour for preparation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) complete all as specified and directed. |
| 5 | Material & Labour for prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer over 3mm thick wall care putty on wall on wall complete all as specified and directed. |
| 6 | Material & Labour for Rendering in CM 1:3, 5mm thick on fair faces of brick work or concrete surfaces on ceiling complete all as specified and directed. |
| 7 | Material & Labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified and directed. |
| 8 | Supply only Intergral waterproofing compound complete all as specified and directed. |
| 9 | Material & Labour for providing anti-termite treatment (post construction) of voids in masonry using chemical emulision one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors complete all as specified and directed.(Note : work executed by specialized agency who is active member with Indian Pest Control Association) |
| 10 | Material and labour for complete removal of existing treatment from old wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade over priming coat of exterior primer complete all as specified and directed. (Height of bldg upto 15 mtrs) |
| 11 | Material and labour for complete removal of existing treatment from old wall surfaces, applying plaster of paris putty of 2 mm thickness and applying two coats of acrylic emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed. |
| 12 | Material & Labour for preparation of old treated surfaces of ceiling and applying two coats of white wash on ceiling surface complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | Material & Labour for Non Skid ceramic(rectified desugner tiles) joint free colourred tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 15 | Material & Labour for Glazed coloured ceramic(Designer) tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including finishing of corners with PVC beadingcomplete all as specified and directed. |
| 16 | Material & Labour for Screed bed or bedding layer of mortor 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 17 | Material & Labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match light shade. |
| 18 | Material & Labour for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. (Note : Work executed by specialized agency who is active member with Indian pest Control Association) |
| 19 | Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match light shade complete all as specified and directed. |
| 20 | Material & Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado complete all as specified and directed. |
| 21 | Supply & Fixing in repair stop valve/angle valve,fancy type, chromium plated, cast copper alloy screwed down,high pressure, Screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Make : Parryware, Model :T7207A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 22 | Supply & Fixing in repairs for two way bib cock mild steel chromium plated suitable for 20 mm dia fixed in position complete in all respect complete all as specified and directed.Make : Parryware, Model No : T7234A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 23 | Supply & Fixing in repairs long body Bib taps, brass chromium plated fancy type with wall flange and fixed for 20mm bore complete all as specified and directed.Make : Parryware . Model No :T7206A1or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 24 | Supply & Fixing in repairs Bib taps, brass chromium plated fancy type with wall flange screwed down, fixed for 20mm bore complete all as specified and directed.Make : Parryware . Model No :T7204A1 or equivalent in Soma/Leader/JAQUAR & CO. PVT.LTD (JAQUAR) |
| 25 | Supply & Fixing in repairs concealed stop cock upper trim chromium plated complete all as specified and directed.Make : Parryware . Model No : T7213A1(Compatible with G5052A1 and G5053A1) or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 26 | Supply & Fixing in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 20 mm bore complete all as specified and directed.Make : Parryware,Model No :T7201A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 27 | Supply and fixing in repair overhead shower rose with arm (125 mm) fixed for 20 mm dia pipe complete all as specified and directed.Make : Parryware . Model No :T9809A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 28 | Supply & Fixing in repairs splash Health faucet mild steel chromium plated suitable for 20 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and directed.Make : Parryware,Model :T9805A1 or equivalent in Soma/Leader/ JAQUAR & CO. PVT.LTD (JAQUAR) |
| 29 | Supply & Fixing in repair Vitreous China wash basin, white, flat back, size500 x 400 x190mm including waste coupling & brackets for fitting complete complete all as specified and directed.Make : parryware , model No C0476 or equivalent in CERA/Parryware/Hindware/ Neyveli Ceramics (Neycer)JAQUAR & CO. PVT.LTD (JAQUAR) |
| 30 | Supply & Fixing in repair floor mounted Elite EWC vitrous china colour/white , P or S trap,including connection to drain or out going pipe and to flushing pipe with plastic water closet seat white pattern , flat bottom and cover including MS CP hinges complete complete all as specified and directed.Make : Parryware . Model No C0297/C0278 or equivalent in CERA/Parryware/Hindware/ Neyveli Ceramics (Neycer)JAQUAR & CO. PVT.LTD (JAQUAR) |
| 31 | Supply & Fixing in repairs Polymer single flushing cistern, 10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketsand flush pipe etc complete all as specified and directed. Make:- Parryware , Model No -Ecosmart (E8090CS) or equivalent in CERA/Parryware/Hindware/ Neyveli Ceramics (Neycer)JAQUAR & CO. PVT.LTD (JAQUAR) |
| 32 | Supply & Fixing in repair brass chromium plated tubular towel rails (24\\") long flanges with chromium plated bracket and fixed complete all as specified and directed. Make : Parryware . Model No :T6901A1 or equivalent in CERA/Parryware/Hindware/ Neyveli Ceramics (Neycer)JAQUAR & CO. PVT.LTD (JAQUAR) |
| 33 | Supply & Fixing for corner shelf with bracket long complete all as specified and directed.Model No-T6910A1or equivalent in CERA/Parryware/Hindware/ Neyveli Ceramics (Neycer)JAQUAR & CO. PVT.LTD (JAQUAR) |
| 34 | Supply & Fixing for Stainless Steel Wall Mount Soap Dish fixed to plugs with chromium plated brass screws complete all as specified and directed.Make- Parryware Model No :T6902A1 or equivalent in CERA/Parryware/Hindware/ Neyveli Ceramics (Neycer)JAQUAR & CO. PVT.LTD (JAQUAR) |
| 35 | supply & fixing in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen (900 x 500 x 230) each complete all as specified.Male : Parryware, Model No :C857372 Flat edge -matt finish or equivalent including taking down of existing one complete all as per specified. |
| 36 | Supply & Fixing for Wall Mounted Stainless Steel Kitchen Disk Rack, For Home, Size: 600 x 600mm and fixed to wall complete all as specified and directed. |
| 37 | Supply & Fixing for 1.5mtr long pull it pulley system operated cloths drying system consisting consisting of chormiun plated pipe of outer dia 22mm, inner dia 19.80mm , fixing to ceilling as specified and directed ( for 05 pipes) |
| 38 | Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size exc 1.50 sqm and n exc 4 sqm each and all as specified and directed. |
| 39 | Supply & Fixing for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →→ Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | Supply & Fixing for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 41 | Supply & Fixing for 75 mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed |
| 42 | Supply & Fixing for 100mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed |
| 43 | Supply & Fixing for 100mm extruded aluminium alloy handles, fabricated type anodised as specified and directed |
| 44 | Supply & Fixing for Second class hard wood plain solid chowkhats and frames wrought framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints, all as specified and directed. |
| 45 | Material & Labour for providing anti -termite treatment (Post construction ) At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the sameto match with the existing surface complete all as specified and directed. ( Note : Work executed by specialized agency who is active member with Indian pest control association) |
| 46 | Supply & Fixing for 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 47 | Material & Labour for Second class hard wood Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, guaze etc. (without sash bars) edges of framing plain chamferred or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I kiln seasoned and chemically pressure treated all as specified and directed |
| 48 | Supply & Fixing for Floor Door Stopper of Aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors 140 mm complete all as specified and directed. |
| 49 | Supply & Fixing for Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size complete all as specified and directed. |
| 50 | Supply & Fixing for Aluminium anodised barrel tower bolts extruded section 200 mm size complete all as specified and directed. |
| 51 | Material & Labour for Aluminium die cast body Door closer hydraulically regulated,designation No. 3,universal type,suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 52 | Supply & Fixing for Extruded aluminium alloy handles fabricated type anodised size 150 mm complete all as specified and directed. |
| 53 | Supply & Fixing for Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long all complete all as specified and directed. |
| 54 | Material & Labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces all complete all as specified and directed. |
| 55 | Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size n exc 1.50 sqm complete all as specified and directed. |
| 56 | Supply & Fixing for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16, complete all as specified and directed. |
| 57 | Material & Labour for preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 58 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each |
| 59 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 60 | S&F 5.5 mm sheet glass, ordinary quality , n exc 0.5 sqm in each glass complete all as specified and directed. |
| 61 | S&F 5.5 mm frosted glass, ordinary quality , n exc 0.5 sqm in each glass complete all as specified and directed. |
| 62 | Supply & Fixing for 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed. |
| 63 | Supply & Fixing in repair moulded polyethylene 500 ltr water tank storage tanks (double layer) (cylindrical vertical with closed top) hoisted and fixed in position including Dismantling water tanks and removing to store capacity in litres exc 250 but nexc 500complete all as specified and directed. |
| 64 | Supply & Fixing for Tank Adaptor for CPVC pipe outer dia 20 mm complete all as specified and directed. |
| 65 | Supply & Fixing for union for CPVC pipe outer dia 20 mm complete all as specified and directed. |
| 66 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 67 | Supply & Fixing for CPVC Ball valve(gate valve) suitable for 20mm outer dia pipes complete all as specified and directed. |
| 68 | Material & Labour for precast cement concrete block masonry with solid blocks exc 10 cm in width in PCC 1:2:4 type B-1 and setting in cement mortar 1:4 complete all as specified and directed. |
| 69 | Material & Labour for RCC work in Slabs supported on walls, beams and columns in floors, roofs, landings, water staging slab balconies, canopies, deck slabs and in shelves in Type B1 (1:2:4) 20mm graded aggregate complete all as specified and directed. |
| 70 | Mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 71 | Material & Labour for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 72 | Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed. |
| 73 | Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer. |
| 74 | Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer .Application shall be provided not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified by the manufacturer. Make :- Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd |
| 75 | Providing and applying n exc 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / Sika plastocrete plus/ equivalent in bostic India ltd, mixed with water in a water & powder ratio 0.18 in ceiling of roof slab/Chajjas/Beams/Parapet walls etcNote:- Quoted tate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed. |
| 76 | Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed. |
| 77 | Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, work in patches of min 1 Sqm all as specified and directed. |
| 78 | Material & Labour for hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5%crude oil by weight of cement complete all as specified and directed. |
| 79 | S&F in repair for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete,all as specified and directed. |
| 80 | Supply & Fixing in repair PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 81 | Supply & Fixing in repair PVC (SWR) bends 110mm radius complete all as specified and directed. |
| 82 | Supply & Fixing in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 83 | Supply & Fixing in repair 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 84 | Supply & Fixing in repair PVC (SWR) pipe 75 mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 85 | Supply & Fixing in repair PVC (SWR) bends 75mm radius complete all as specified and directed. |
| 86 | Supply & Fixing in repair 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 87 | Supply & Fixing in repair 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 88 | Supply & Fixing for 50mm dia Unplasticised PVC pipe of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors complete all as specified and directed. |
| 89 | Supply & Fixing for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 90 | Supply & Fix 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as per specified & directed. |
| 91 | Material & Labour for waste fittings, brass, chromium plated for glazed ware for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed dia 32mm complete all as specified and directed. |
| 92 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore & Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 93 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 20 mm bore & Supplying and laying of CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 94 | Material & Labour for providing anti-termite treatment (post construction) along the extenal wall below concrete apron/ plinth protection using chemical emulsion (for using Chloropyriohos emulsifable concentrates conforming to IS- 8944-2055) @ 2.25 ltrs per linear meter. the hole 300 mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match with the existing floors complete all as specified and directed. (Note : Work executed by specialized agencyy who is active member with Indian Pest Control association) |
| 95 | Material & Labour for cement concrete type c-2, 1:3:6 (40mm graded aggregate) 75 mm thick in plinth protection complete all as specified and directed. |
| 96 | Material & Labour in repair for 18/19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed. |
| 97 | S&F in repair 100mm extruded brass handles, fabricated type polished complete all as specified and directed. |
| 98 | S&F brass Locks, cupboard, grade I, size 50 mm complete all as specified and directed. |
| 99 | S & F in repair 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
| 100 | S&F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in all as specified and directed |
| 101 | Demolition of reinforced cement concrete in other than ground floors landings, chajjas and similar work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 102 | Demolition of reinforced cement concrete in other than ground floors landings, chajjas and similar work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender