Tender For Development Of Parking Area Alongwith Allied Works At Marwad, Nani Daman.
Tender Value
1.37 Crore
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
2.75 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Daman → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Parking Area Alongwith Allied Works At Marwad, Nani Daman.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Sep-2026 | Corrigendum-I | Other | 18-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle |
| 3 | Preparation ground surface to proper slope and camber for making a base for ground parking work including cutting and filling of excavated stuff with use of mechanical means use of excavator and levelling by use of gradder as directed by the Engineer-in-charge. |
| 4 | Construction of Subgrade/Embankment and earthen shoulders with approved material obtained from Roadway cutting with spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ( Subgrade CBR ≥ 10 ) |
| 5 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (As per Code No. 4.1 NH SOR-2023-24) |
| 6 | Supplying of crushed stone aggregates, chippings etc. of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater (for surface dressing etc.) and spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and gradient, size grading as per I.R.C. Code. (vii) 6mm-10mm |
| 7 | Boring holes 2.0 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes. (ii) 250 mm |
| 8 | Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. (A) Loose or soft soil |
| 9 | Providing and laying controlled cement concrete M.150 for curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete |
| 10 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. (upto 10 ton) |
| 11 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. (upto 10 ton) |
| 12 | Providing Primary TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton) Upto and above plinth level |
| 13 | Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes (A) 10mm to 16mm dia bar |
| 14 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete M:30. |
| 15 | Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional. |
| 16 | 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement: 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement: 1-sand) etc. complete. |
| 17 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. |
| 18 | Providing and installing 5 ft high Unico Shield perimeter security fencing, with base-plate mounted posts, RAL 6005 green powder-coated finish, complete as per approved drawing and manufacturer's specification. |
| 19 | Providing, supplying, installing, testing and commissioning complete IP-based CCTV surveillance system, including cameras, 16-channel NVR, HDD, PoE switches, CAT-6 cable, 6-core fibre optic cable, media converters, patch cords, racks, UPS, 32-inch LED monitor, connectors, laying, termination, configuration and commissioning complete as per detailed specifications.(12mt High Mast vertical pole, to be shifted from department store in all respect). |
| 20 | Providing, supplying, erecting, testing and commissioning 12 m high mast lighting system, including foundation, 6 Nos. 200 W LED floodlights, control panel, chemical earthing, armoured cable, DWC pipe, excavation, erection and all accessories complete. |
| 21 | Providing, supplying, installing, testing and commissioning Arma Tech automatic heavy-duty boom barrier system with 7.5 m aluminium retractable boom arm, drive mechanism, control panel, safety photocell/sensors, remote control, manual release facility, mounting arrangement, cabling and necessary accessories, including transportation, fitting and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 22 | Providing, Supplying and Installation of Porta Cabin of Size 10'-0\\" × 8'-0\\". Providing, supplying, transporting, installing, fixing and commissioning of a complete pre-fabricated Porta Cabin of overall size 10'-0\\" × 8'-0\\", as per the approved drawing and layout, including all materials, labour, tools, tackles, transportation and incidental works, complete in all respects. The Porta Cabin shall comprise suitable structural framework with insulated wall and roof panels, finished internal and external surfaces, flooring, doors, windows and all necessary fixtures and fittings.The item shall include the following internal facilities and fittings:1. One main room/bed space with provision for one bed of size 6' × 2'-6\\" as shown in the drawing.2. Two Nos. sliding windows of size 4' × 4', complete with frames, shutters, glass and all necessary fittings.3. Two Nos. tube/LED lights, complete with wiring, switches and electrical fittings.4. One No. Stainless Steel table/wooden stand of size approximately 18\\" × 36\\" × 30\\", as per layout.5. One No. louver with exhaust fan, complete with fittings and accessories.6. One No. Western type W.C. with flushing arrangement, complete with necessary plumbing fittings.7. One No. wash basin (W.B.) complete with tap, waste pipe and necessary plumbing connections.8. One main entrance door complete with frame, shutter, lock, handle, hinges and all required hardware. All complete as per drawing and manufacturer specifications and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender