Tender For Upgradation Of Forest Inspection Hut (Fih) At Aharbal Including Landscaping At Aharbal Hut Complex, Special Forest Division Kulgam.
Tender Value
20.09 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
5 days left
EMD
40200
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Forest Inspection Hut (Fih) At Aharbal Including Landscaping At Aharbal Hut Complex, Special Forest Division Kulgam.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil |
| 4 | Providing & laying dry stone solling, sand/dust including ramming, dressing etc complete in foundations and under floors, including Mech. Carriage & Head load charges up to site of work complete. |
| 5 | Providing & laying in position cement concrete (1cement: 4 coarse sand: 8 graded stone agg 40mm nominal size) mix of specificied grade excl cost of centering and shuttering. All work upto plinth level. |
| 6 | Centering and shuttering including strutting, propping etc and removal of form work for. Foundations, footings, bases of columns etc. |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 8 | Brick work in plain arches in superstructure above plinth level and upto floor V level including centering, shuttering and curing complete for span upto 6 meters with common burnt clay (non-modular) bricks of class designation 7.5 in cement mortar 1:3 ( 1 cement : 3 coarse sand ) |
| 9 | Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry. But excluding the cost of nosing of steps etc complete. (50 mm thick with 20 mm nominal size stone. |
| 10 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 11 | 12 mm cement plaster of mix 1:4. (1 cement : 4 coarse sand ). |
| 12 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 200x10 mm |
| 13 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 14 | Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary C.P. brass screws, nuts, bolts and washers etc. complete. |
| 15 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete. 250 mm weight not less than 280 grams. |
| 16 | Providing & fixing gang saw cut,mirror polished, premoulded and prepolished machine cut for kitchen platforms,vanity counters window sills,staircase risers over 20mmthick cement mortar 1:4mix Granite any color or shade 18 mm thick. |
| 17 | Providing & fixing of imported Wooden Flooring 12 mm thick including all carriages from approved source up to site of work complete job. |
| 18 | Providing & fixing of 6mm thick Foam including all carriages from approved source up to site of work complete job. |
| 19 | Providing & fixing of PVC Ceiling & Walls (6mm-8mm)of standrad quality and required colour with required Jams, with wastages including all carriages from approved source up to site of work complete job. |
| 20 | Providing & fixing of Required PVC Corrince for Ceiling & Panelling Including all carriages of material from approved source up to site of work complete job. |
| 21 | Providing and fixing 6 mm thick frameless toughened glass for windows of approved brand and manufacture, including providing and fixing of required size beading including labour and carriages complete job. |
| 22 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . 11.29.1 Light shade using white cement 11.29.2 Medium shade using 50% white cement and 50% ordinary cement. |
| 23 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 24 | Stone tile work like Buch/Devri shaded or any matching stone tile (thickness to be specified by the manufacturer) of any colour and shade for wall lining upto 10m height with special adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1: 3 (1 cement: 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. including all carriages complete. |
| 25 | Sanitary work of Standrad & approved quality, Including all carriages of material from approved source up to site of work including all required accessories/parts with all fittings complete. (From S.NO 26-33). |
| 26 | Big Wash Basin for Hand wash Loddy with Pedestral. |
| 27 | Providing & fixing of centre hole basin mixer for wash basins. |
| 28 | Providing & fixing of CP Angle value. |
| 29 | Providing & fixing of looking mirror. |
| 30 | Providing & fixing of towel rod. |
| 31 | Providing & fixing of soap cases. |
| 32 | Providing & fixing PVC pipes 100mm. B Class |
| 33 | Providing & fixing PVC pipes 75mm. B Class |
| 34 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, ouplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. (20mm OD) pipe |
| 35 | Providing & fixing of concelead Electrification of Standrad and Approved quality, passing through plastic channels / conduits in 3/20, 7/16 & 7/20 wire incld. cost of channels, conduits, all required accessories/parts, nails, wiring, labour charges with all carriages complete. (From S.NO 36-47). |
| 36 | Lighting points (1.5mm sq. wire). |
| 37 | Lighting Circuits with (2.5mm sq. wire). |
| 38 | Heating Points with SS combine (4mm wire ,15 Amp). |
| 39 | Generator /Inverter fittings Lighting points (1.5mm sq. wire). |
| 40 | Three pin Socket. |
| 41 | MCB DP 32- Amp |
| 42 | MCB DP 40- Amp |
| 43 | MCB DP 63- Amp |
| 44 | MCB DP 100- Amp Including all Complete Job |
| 45 | Exhuasters |
| 46 | Concelead LED Bulbs. |
| 47 | Changeover Box 63 AMP. |
| 48 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 49 | Applying priming coat with ready mixed pink or grey primer of approved brand and manafacture on wood work. (Hard & soft wood). |
| 50 | Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work. |
| 51 | Pointing walls with Lime Surkhi of required shade on new Brick work with Scafolding and including all carriages of material from approved site up to site of work and as directed by incharge Engineer. (Exterior finishing). |
| 52 | Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. |
| 53 | Distempering with oil bound washable distemper of approved brand and manafacture to give an even shade two or more coats on new work and including priming coat with cement primer. |
| 54 | Providing and fixing of Kitchen Cabnet using teak wood, Dalmica including all required standrad accesseries/items complete. |
| 55 | Providing and fixing of Wardrobs using teak wood, Dalmica including all required standrad accesseries/items complete. |
| 56 | Providing & Fixing of Hamam using standrad quality and size of hand made devri stones, with beam of Baramulla (Flake Stones) including filling of sand under floor and using of sand cement, bricks for required pillars and opening of fire place with exhasut Pipes including surkhi and other relvant/ required items with all carriages of material from approved source up to site of work, finished and tested complete job. |
| 57 | Dismantling of Brick Work of Dinning Hall for const. of Arch wall and dismentilling of Panned doors, Shutters including wireguze shuuters and Jambs. etc., including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 58 | Providing, fabricating and erecting an eco-friendly Main Entrance Gate comprising two sturdy vertical round bellies/posts on either side of the main vehicular entrance and corresponding posts for the pedestrian gate, using sound, seasoned and good-quality first-class Deodar timber of minimum 2.25 ft (27 inches) girth, securely embedded and anchored in individual RCC concrete foundation blocks of size 3'-6\\" × 3'-6\\" × 3'-6\\", including all necessary excavation, foundation work, anchoring/fixing arrangements and making good the surroundings, complete. The upper framework shall comprise same first class Deodar timber members arranged in the pitched-roof configuration, including cutting, shaping, jointing, drilling, fastening and all necessary hardware and fittings. The wooden signage board in proper shape and size available at site shall be securely fixed within the Deodar timber framework. The main vehicular gate and pedestrian gate shall be fabricated from MS hollow sections of specified sizes and thicknesses, including complete framing, internal stiffeners/supports, welding, grinding and finishing, and shall be provided with suitable green-coloured fibre-sheet cladding of approved quality and thickness. The gates shall include heavy-duty hinges, handles, locking/latching arrangements, stoppers, bolts and nuts, screws, welding electrodes and all other necessary fittings and accessories for smooth and secure operation. All exposed MS members shall be properly cleaned and treated with suitable anti-corrosive primer and finished with approved exterior-grade paint. The entire work shall be complete in all respects, including labour, materials, tools, equipment, transportation, fixing and all incidental works, as per approved design, drawing, specifications and directions of the Engineer-in-Charge. |
| 59 | Provision for Ext. of Verd Truss / CGI Sheeting & Removing & Refitting Existing Railing |
| 60 | Carriage of Bricks by Mechanical Transport up to site of work av. 40 kmts |
| 61 | Carriage of Sand by Mechanical Transport up to site of work av. 20 kmts |
| 62 | Carriage of Bagri by Mechanical Transport up to site of work av. 15 kmts |
| 63 | Extra carriage of Earth by Mechanical av 5 kmts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender