Tender For Construction Of Operation Threater Cum Mini Lab At Veterniary Hospital Devsar
Tender Value
1.34 Crore
Estimated cost
Bid Submission
16 Sep 2026
1 days left
EMD
2.68 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Operation Threater Cum Mini Lab At Veterniary Hospital Devsar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : in or underwater and/or liquid mud including cost of pumping or bailing out water and removing slush etc. |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying of stone soling laid dry hard packed tightly including all carriages complete |
| 4 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone NALLAH |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. |
| 9 | All works upto plinth level |
| 10 | All works above plinth level upto floor V level |
| 11 | Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein. 0.7 Qtl/cum |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels. Fe-500D TMT bars |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 14 | Foundations, footings, bases of columns etc. for mass concrete. |
| 15 | Walls (any thickness) including attached pilasters, buttresses, plinth and |
| 16 | Columns, pillars, piers, abutments, posts and struts. |
| 17 | Suspended floors, roofs, landings, balconies and access platforms. |
| 18 | lintels,Beams, Plinth Beams, Girders, and Cantilevers |
| 19 | Stairs (excluding landings) except spiral staircases. |
| 20 | Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class imported wood |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, First class imported wood 30mm thick |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class imported wood 30mm thick |
| 24 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick., First class importedood |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Including Butt hinges and necessary screws First class imported wood 35mm thick |
| 26 | Providing anf Fixing of 4 mm thick glass pane (weighing not less than 10 kg/sqm) including beeding 20mm of kialwud |
| 27 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over and including wood primer of approved brand |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 30 | Providing /Fixing of Door/Window Stard wire Fittings |
| 31 | A) T Bolts |
| 32 | 100 mm X 10mm |
| 33 | 150mm X 10mm |
| 34 | B) Handles |
| 35 | 125mm |
| 36 | 150mm |
| 37 | C) L drops (Links) |
| 38 | 300 mm |
| 39 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 40 | 6mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 fine sand) ceilings |
| 41 | Providing and applying Plaster of Paris putty (Wall putty) of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 42 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 43 | Providing and laying anti skid Vitrified floor tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 44 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm |
| 45 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 46 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 47 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 48 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 49 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded. Providing and fixing steel angle sextion with ms plater underneath soff, including priming coat with approved steel primer all complete. |
| 50 | Providing and fixing with High rib colored profile GS galvanized steel sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters 0.50mm Thick including ridges, hips etc |
| 51 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 52 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry upto 1 metre of walls height |
| 53 | Providing Ornamental Moulding (POP) around windows /doors on outer side as per approved design and directions of engineer in charge |
| 54 | Carraige of materials by mechanical transport from source to site of work incl loading and unloading complete |
| 55 | Sand -Avg 10km |
| 56 | Aggregate -Avg 10km |
| 57 | Plumbing |
| 58 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. : |
| 59 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm |
| 60 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 61 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 62 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 63 | Providing and fixing toilet paper holder 18.34.1 C.P. brass |
| 64 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 65 | Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality (hindware) |
| 66 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face withconcealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 67 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 68 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 69 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 70 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
| 71 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 72 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 73 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 74 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 75 | PN-16 pipe , 32mm OD(SDR-7.4 |
| 76 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 77 | Providing and fixing PPR Unions |
| 78 | PPR Union 20mm |
| 79 | PPR Union 25mm |
| 80 | PPR Union 32mm |
| 81 | PPR Union 40mm |
| 82 | PPR Union 50mm |
| 83 | Providing and fixing of centrifugal monoset self primimng pump 1.5kw/2HP (Crompton) Havells or equalivent incld: all fixtures complete |
| 84 | Supply, Placing and fixing in position 50litre water Gyser venius /Havells or eqvialent make incld: all fixtures |
| 85 | Providing and fixing of floor traps 110 mmwith double chrome plated cover one grated and one closed and all other fittings required |
| 86 | Providing and fixing testing and commisioning PVC SWR pipes jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rcc brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. Type-B |
| 87 | 100mm P.V.C. pipe |
| 88 | 75 P.V.C. pipe |
| 89 | Collar diff dia |
| 90 | Bend diff dia |
| 91 | door bend different dia |
| 92 | Door tee |
| 93 | P.V.C Tee Diff dia |
| 94 | P.V.C Reducer Diff dia |
| 95 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore |
| 96 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete |
| 97 | 32 mm nominal bore |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 99 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 100 | Electrification |
| 101 | INTERNAL WIRING |
| 102 | Wiring for light point/fan point/exhaust fan point/call bell point with 2 x 1.5 sq.mm PVC insulated, FRLS copper conductor, 1100 V grade wires, conforming to IS 694, with conductors as per IS 8130 and insulation as per IS 5831, and having fire performance in accordance with IEC 60332, ISI marked with valid BIS license, complete with all accessories, (Havell/ Polycab/APAR/ Fenolex/KEI/RR kabel/ Anchor or OEMs/ firms holding ISO 9001 certification (Quality Management System) and shall be supplied with routine test certificates, and any material not conforming to the specified standards shall be rejected, complete with all accessories as required; single core cable in surface / recessed medium class PVC conduit (Including cost of conduit), with modular switch (Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A |
| 103 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit ( Including cost of conduit) |
| 104 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box, connections etc. as required. Modular Switch & Socket:- ( Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make. ) |
| 105 | Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/APAR/ Fenolex/KEI/RR kabel/ Anchor make ) as described in item no 1 as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit,( including cost of conduit) alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 106 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 no. 3 pin 5-10 A modular socket outlet and 2 no.5-10 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.) |
| 107 | Supplying and fixing of following modular switch/ socket/indicator on the existing modular plate and switch box including connections but excluding modular plate etc. as required. i. 3 pin 5/6A socket outlet |
| 108 | Supplying and fixing of following modular switch/ socket/indicator on the existing modular plate and switch box including connections but excluding modular plate etc. as required. i. Indicator |
| 109 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/APAR/ Fenolex/KEI/RR kabel/ Anchor make ) as described in item no 1, single core cable in surface/ recessed medium class PVC conduit as required. Including cost of conduit. |
| 110 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (Inverter Circuit) |
| 111 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (Lighting Circuit) |
| 112 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire ( Lighting submain/ AC Wiring) |
| 113 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire ( Heating submain) |
| 114 | S/F testing and comm Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve /Schneider . Legrand /ABB; / Havells ./ Siemens/ L&T / Hager /BCH make OR OEMs/ firms holding ISO 9001 certification (Quality Management System) as directed by engineer in charge. |
| 115 | 6-32 Amp SP MCB |
| 116 | 32amp DP MCB |
| 117 | 63amp DP MCB |
| 118 | Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates |
| 119 | Supplying and fixing following way, Horizontal type,Single pole and neutral, sheet steel, MCB distribution board,( legrand/ Shinider/Hager/ABB make) 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, Interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 120 | 6 way (4+18), Double door |
| 121 | LIGHTING FIXTURES AND FANS |
| 122 | Supply Installation testing and commissioning of 12 W LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminum Heat Sink and P.F>0.95, THD<10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70, separate driver, heat sink, earthing provision. The input voltage range shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certifications:- LM79 & LM80 test report should be from govt. approved in-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/ Havel's /Wipro make / sample to be approved before Installation. |
| 123 | Supply, installation, testing and commissioning of exhaust fan of 200-250 mm sweep suitable for wall/window mounting, complete with necessary frame, mounting arrangement, louvers/shutter, and all accessories as required; the fan shall be of robust construction with high-grade engineering plastic/metal body, aerodynamically designed blades, and heavy-duty copper motor suitable for continuous operation, conforming to relevant Indian Standards and safety requirements of Havell /Bajaj/Crompton/ USHA/ Orient OR OEMs/ firms holding ISO 9001 certification (Quality Management System) as directed by engineer incharge as per site requirement and necessary connections. |
| 124 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of Insulation: B, 3 nos. blades, suitable long down rod, 2 no. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS 374-2019), THD less than 10%, remote regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Atomberg/Orient/USHA /Havells /Crompton / OR OEMs/ firms holding ISO 9001 certification (Quality Management System) as directed by engineer incharge. |
| 125 | Supply Installation testing and comm. of flood light 100 W (warm, white), Epoxy powder coated die-cast aluminum housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07.. with high power LED's as light source with Built-in Potted IP67 electronic LED driver with APFC, lower THD, toughened glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havells /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 126 | Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor Roma plus/SSK NV/ equivalent make. |
| 127 | Supply, installation, testing and commissioning of 400mm sweep wall fans, incl. cost of ceiling rose and making of and necessary connections. (Havells/ Philips). |
| 128 | CABLING |
| 129 | S/Laying ( partly overhead/ partly underground) , testing and commissioning of XLPE aluminum armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havell/Eq. standard make as directed by engineer in charge and making end termination with brass compression gland and aluminum lugs of required size. |
| 130 | 50 sq.mm 2 core (armoured) |
| 131 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench, making the surface level but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia. (OD 63mm & ID 51 mm nominal) |
| 132 | MAIN PANEL / EARTHING / POWER BACKUP / AIR CONDITIONERS |
| 133 | PANEL: Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel, floor mounted, vermin and dust proof, outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears. Aluminum Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. The scope of work also entails securely installing the panel into the ground with concrete encasing its legs (As per approved design, size may vary as per site requirement) |
| 134 | INCOMING |
| 135 | 125 amp DP MCB 10 KA Legrand /Schneider/L&T/ABB make. |
| 136 | 2 No. of Aluminum Bus Bar of 200 Amp. |
| 137 | Change over switch 63 Amp |
| 138 | 2 No of Aluminum Bus Bar of 100 Amp |
| 139 | Digital meters and phase indicators -1 set. |
| 140 | OUTGOING |
| 141 | 63 amp DP 10KA MCB |
| 142 | Space for 8 way MCBs |
| 143 | Providing / laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick in size. |
| 144 | Providing of chemical earthing as per IS standards by way of digging 6 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the electrode with main control board by 10 SWG Copper wire with 1/2\\" dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. |
| 145 | Supply, installation, testing and commissioning of minimum 2KVA Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 200 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes. |
| 146 | Supply of 1.5 ton Capacity Wall mounted Split Air conditioners, (hot & cold) Rated cooling capacity in Watts as per IS:1391 (Part 2) 3 star rating inverter type fitted with hermetically sealed Rotary type compressor (INVERTER rotary compressor (Variable Speed) ) operating on 230V ±10%, 50Hz single phase AC supply with evaporator and condensing unit made of copper tubes with aluminum fins, cordless remote control, copper piping for both suction and discharge of three(03) meters length with protection covering for piping rubber insulation, of suitable size of medium PVC pipe, power and control cabling as per site requirement, comprising of following etc. complete as per requirement. a) Insulated copper pipe lines liquid and suction lines as per manufacturer recommendation with OEM standard Eco-friendly Refrigerant Gas. b) Flexible copper cable between indoor & outdoor Unit of suitable size as per Manufacturer recommendation 3Cx2.5sq.mm copper flexible Minimum 3 meters Length c) PVC Drain Pipe as per the OEM standard and Site conditions d) Suitable size of Rubber Insulation & protective covering of refrigerant line, DAIKIN/ MITSUBISHI/ CARRIER/HITACHI / IFB/ BLUESTAR/VOLTAS/LG make. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one year from date of successful commissioning. |
| 147 | Installation, Testing & commissioning of 2TR/1.8TR & 1.5 TR Capacity Wall mounted Split Air conditioners including all necessary accessories, fixing of Indoor Unit, fixing of Outdoor Unit on Dully painted suitable size MS Stand including grouting/mounting of stand, including first charging of refrigerant with laying of Insulated copper pipe lines liquid and suction lines and Installation of Drain pipe etc. complete for above item as per site requirement |
| 148 | Supply of wall Mounting type 4KVA capacity, Metal body, single phase, Automatic line Voltage stabilizers with copper wound coil having an input voltage 135 to 275V and a balanced/steady output voltage of 220 V +- 3%, single phase, 50Hz AC with built in time delay, cut off and low voltage cut-off, i/p, o/p trip indications, metal clad top etc., with connecting 3 core cable of 1 meter length complete etc. as per site requirement. EVEREST/V-GUARD/ PREMIER or eq. |
| 149 | Supply and fixing of Extra Copper Tube (Supply copper tube & Return copper tube) suitable for 1.5TR & 1.8/2.0TR Split AC (beyond 3 meters/AC) from Indoor to units to Outdoor Unit along with Suitable rubber insulation completes as per site requirement. COPPER TUBE TOTAUNE/MANDEV/ MET TUBE BRANDS |
| 150 | Supply and installation of 32A, modular plug / socket with 32A DP MCB for ACs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender