Tender For Dnit For The Work Of Renovation Of 02 Nos. Public Toilet Blocks At Mhc Near Community Center In Marekt And Near Booth No. 95 To 101, Mhc, Manimajra Under The Jurisdiction Of Mcph Division No.2, Chandigarh. Approx. Amount : Rs.3,11,098/- Ea
Tender Value
3.11 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
5 days left
EMD
6222
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For The Work Of Renovation Of 02 Nos. Public Toilet Blocks At Mhc Near Community Center In Marekt And Near Booth No. 95 To 101, Mhc, Manimajra Under The Jurisdiction Of Mcph Division No.2, Chandigarh. Approx. Amount : Rs.3,11,098/- Earnest Money : Rs.6222/- Time Limit : .02 Months
BOQ
| Sl. No. | Item Description |
| 1 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (DSR 14.13) 18'-2\\"x11'.6\\" = 208.84 sft Deduction (-)2x3'-0\\"x5'-0\\" = 30.00 sft 178.84 sft or 16.62 sqm |
| 2 | Providing gola 75x75 mm in cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR 12.21.1) 2x(18'-2\\"+11'-6\\") = 59.32 rft 2x2(3'-0\\"+5'-0\\") = 32.00 rft 91.32 rft or 27.84 mtr |
| 3 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR 12.22) |
| 4 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska With F.P.S. brick tiles (DSR 14.18.1) Qty. taken as per item no. 1 |
| 5 | Supply of New brick tiles having size 0'-9\\" x 0'-4.5\\" x 0'-1.5\\" 40% of item no. 1 i.e. 40% x 16.62 sqm = 6.65 sqmNumber of bricks in 1 sqm= 38 nos. Therefore, no. of bricks in 16.62 sqm = 253 nos. |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(DSR 15.60)6.65 sqm x .15 mtr. = 1 cum (40% of 16.62 sq.mm) |
| 7 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : |
| 8 | With residual type petroleum bitumen of grade VG -10 (DSR 15.12.1) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) |
| 10 | 12 mm cement plaster finished with a floating coat of neat cement ofmix : 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) Qty. taken as per item no. 10&1185.51 + 45 = 130.51 @ 50% = 65.25 sqm |
| 11 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 14.46)Qty. as per item no. 5 |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2 )P.T near Community Centre Outer wall = 1x(18'-2\\"+18'-2\\")x11'.6\\" = 417.68 sft 1x10'-0\\"x11'-6\\" = 115.00 sft Parapet wall = 2x4'-0\\"x18'-0\\" = 144.00 sft Pillar = 3x4'-10\\"x11'-6\\" = 166.63 sft 843.31 sftDeduction Doors 2x2'-6\\"x11'-6\\" (-) = 57.50 sftWindow 2x8'-0\\"x3'-6\\" = 56.00 sft Meter box 1'-3\\"x 1'-10\\" = 2.28 sft 727.53 sft or 67.61 sqmP.T near booth no. 101Outer wall = 11'-4\\"x11'.6\\" = 130.29 sftOuter side wall= 4'-9\\"x11'-6\\" = 54.62 sft 6'-6\\"x11'-6\\" = 74.75 sft 259.66 sft Deduction of doors 1x2'-6\\"x7'-10\\" (-) = 57.50 sft Windowx 3'-1\\"x 3'-1\\" = 9.48 sft 192.68 sft or 17.90 sqm 67.61 sqm + 17.90 sqm = 85.51 sqm |
| 13 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (DSR 13.90.1)PT near Community CentreInner wall= 2x2sidex8'-0\\"x3'-6\\" = 112.00 sft = 2x3'-6\\"x5'-6\\" = 38.50 sft Roof = 2x8'-0\\" x 11'-0\\" = 176.00 sft PT near booth 99 to 101Community CentreInner wall = 2x( 4'-9\\"+11'-4\\")3'-6\\" = 112.56 sft Roof = 4'-9\\" x 11'-4\\" = 53.81 sft 492.87 sft Deduction Door = 1'-6\\"x2'-6\\" (-) = 3.75 sft wimdow = 1'-6\\"x3'-0\\" = 4.50 sft 484.62 sft or 45.03 sqm |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work. (DSR 14.54.1)PT near booth 99 to 101Community CentreDoor = 2x2'-6\\"x7'-10\\" = 39.15 sft Window = 2x3'-1\\"x3'-1\\" = 18.96 sftP.T near Community CentreDoor = 2x2sidex2'-6\\"x11'-6\\"\\" = 140.00 sft Window = 2x8'-0\\"x3'-6\\" = 56.00 sft Meter box = 2x1'-3\\"x1'-10\\" = 4.56 sft 258.67 sft or 24.039 sqm 24 sqm of 60 % = 14.42 sqm |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80)Qty. taken as per item no. 10&1185.51 + 45 = 130.51 @ 60% = 78.30 sqm |
| 16 | Providing laying and jointing glazed stoneware pipes class SP-1 with stuff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete: SW pipe 100mm (DSR 19.1.1) |
| 17 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (DSR 11.36) |
| 18 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR 14.82) |
| 19 | Dismantling Wash Hand Basin, Urinals with existing CI brakets & fitting of all sizes including handing over the material to Department all complete as per direcitons of Egnineer-In-Charge. (Extra items) (NSI) |
| 20 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : (DSR 15.12.1)of area 3 sq. metres and below |
| 21 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal ofunserviceable materials within 50 metres lead. (DSR 15.52) |
| 22 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead. |
| 23 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 100 mm diameter (DSR 19.5.1) |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. (DSR : 17.2.1 ) |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR 17.1.1) |
| 26 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes (DSR 10.30.1)Door 2x2'-6\\"x5'-0\\" = 25.00 sftWindow 2x8'-0\\"x3'-6\\" = 56.00 sft 81.00 sft or 7.53 sqm |
| 27 | Manufacturing, fabrication and fixing of M.S doors size 6'-0\\"x3'-0\\" made out of M.S sheet having gauge of 1mm thick, M.S angle of size 35x35x5 & 32x32x5 mm M.S sheet, MS flat , hold fast, kundi, handle, hings, electric rods charges, gen set, charges welding and finishing with good qulaity paint (teo coats) complete in all respect (NSI) |
| 28 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. (DSR 19.4.1.1) |
| 29 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.30.1.1) |
| 30 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (DSR 18.10) |
| 31 | 15 mm dia nominal bore (DSR 18.10.1) |
| 32 | 20 mm dia nominal bore (DSR 18.10.2) |
| 33 | 25 mm dia nominal bore (DSR 18.10.3) |
| 34 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) |
| 35 | 25 mm nominal bore (DSR 18.17.1) |
| 36 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (DSR 18.18) |
| 37 | 25 mm nominal bore (DSR 18.18.3) |
| 38 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.4) |
| 39 | Providing and fixing white vitreous china flat ack urinal of size 375x390x590 mm inclduing support fittings C.P. Brass waste coupling cutting and making good the walls and floors wherever required Make: Cera, Hindware of equivlent. (NS) |
| 40 | Providing and fixing 15 mm urinal spreader (Brass) sixe 95x69x10 mm complete. (NS) |
| 41 | Providing and fixing steel soap dish holder with concealed fitting arragments. (NS) |
| 42 | Providing and fixing brass bib cock of approved quality: 15 mm nominal bore. (NS) |
| 43 | Providing and fixing C.P. Brass angular stop cock with wall flange complete in all respects. (NS) |
| 44 | Providing and fixng uplasticised PVC connection pipe with brass unions 45 cm lenght. (NS) |
| 45 | Providing and fixing PVC waste pipe. (NS) |
| 46 | Providing and fixing steel grating of approved quality and colour circular type: 100 mm nominal dia. (NS) |
| 47 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C. P. Brass screws and washers complete. (DSR 17.31) |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with (NS) |
| 49 | Dismanteling of overhead polyethylene water storage tank, IS: 12701 placed at the terrace (at all floors) (NSI) |
| 50 | Providing and fixing LED tubelinghts 4' x 22W including making connection etc. Complete. Make: Philips or (NS) |
| 51 | Providing and fixing of ceiling fan of size 18\\" including bolting and making conneciton etc. Complete. Make: Havells/Orient/Khaitan. (NS) |
| 52 | Providing and fixing exhaust fan of size 12\\" including cost of drilling, bolting and making connection etc. complete. Make: Khaitan/Crompton/Havells. (NS) |
| 53 | Wiring for light point/fan point/exhust fan point with 1.5 sqm FRLS PVC insulated copper conductor single core cable in surface, recessed medium clas PVC conduict with Piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point wioth 1.5 sqmm FRLS PVC insulated copper condutor single core cable etc. as required 1.8.1 group A (NSI) |
| 54 | Providing and fixing of aluminium cabel 10 mm sq core make Polycabe/ Havells/KEI complete in all repect (NSI) |
| 55 | Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. (1.24) |
| 56 | (A) 1.24.1 5/6 A Switch |
| 57 | (B) 1.24.1 5/16 A Switch |
| 58 | Providing and fixing of sanitary paid vending machine at public toilet block including cost of wiring, nut bolt etc. complete in all respect. |
| 59 | Providing and fixing of sanitary paid incinerator machine at public toilet block including cost of wiring, nut bolt etc. complete in all respect. |
| 60 | Providing and fixing of hand dryer including wiring complete in all respect |
| 61 | Providing and fixing of paper napkin box complete in all respect |
| 62 | Providing and fixing of Electricity meter at the 02 nos. public toilets including wiring testing complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender