Tender For Outcell Piping And Equipment Installation For Block-102A At Inrp, Nrb Tarapur
Tender Value
47.58 Crore
Estimated cost
Bid Submission
08 Oct 2026
23 days left
EMD
57.58 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Outcell Piping And Equipment Installation For Block-102A At Inrp, Nrb Tarapur
BOQ
| Sl. No. | Item Description |
| 1 | Collection of FIM, handling, transportation, storage, pickling & passivation, physical measurement, checking interferences, edge preparation, fit-up, vibro-etching for identification, installation & alignment on supports of SS304L pipelines, fittings, inline equipment like valves, orifice, Steam traps, Thermowell, flanges, gaskets, nut & bolts, bellows, ejector, etc. at various floors/elevations. This also includes preparation of fabrication drawings, supply of consumables, instruments, scaffoldings, setting up of fabrication shop, dimensional measurement, pressure testing, cutting of blinds on nozzles/ pipe EPs, drilling of hole for TEE branch, providing as built drawings, documentation, FIM accounting etc. as per technical specifications, drawings and as directed by EIC. Size of pipes involved are from 8NB to 450NB.Pipes ≤1\\" shall be considered as 1 Inch-meter. |
| 2 | Cold bending of SS 304L Pipes including cleaning, LP examination, profile checking, ovality, thinning and dimensional measurement as per technical specifications. Bending machine, dies and other consumables as required are in the scope of contractor. Pipe size ranging from 8NB to 50NBPipes ≤1\\" shall be considered as 1 Inch-bend. |
| 3 | Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including edge preparation, fit-up, LP examination on root and final pass, local passivation of joints along with supply of all consumables and filler wires as per technical specifications. Pipes ≤1\\" shall be considered as 1 Inch-dia. |
| 4 | Pipe size ranging from 8NB to 25NB |
| 5 | Pipe size ranging from 40NB and above |
| 6 | Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations/floors. Arrangement of Radiography equipment, Gamma source, tools, safety gadgets, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and audit radiography joints will not be counted for measurement. It also includes providing of digitized Radiographs as well as hard copy along with other inspection reports. |
| 7 | Fillet/Flange welding of SS to SS and SS to MS material by GTAW process using ER308L/309L filler wires with argon purging/shielding including edge preparation, fit-up, LP examination on root and final passes, local passivation of joints, along with supply of all consumables and filler wires as per technical specifications.Pipes≤l\\" shall be considered as 1 Inch-dia. |
| 8 | Supply, fabrication and installation of SS-304L identification tags along with holding rings of size 100mm (Length) x 25mm (Width) x 1mm (Thick). Line number/ fitting designation given by the department engraved with 5mm text height and highlighted with black paint. Each line tag shall be placed at suitable locations with holding ring as per technical specification and instruction given by the EIC. |
| 9 | Supply of material, fabrication, inspections, and erection of pipe supports, structure, staging, staircase, hand railing, grating, ALP racks, plate EP, etc. made of MS material having sections strips, angle, channels, beams, box sections, plates, ERW pipes, etc. It also includes preparation of fabrication drawings, welding and LP examination on final pass, cleaning and epoxy painting as per technical specification and approved drawings. |
| 10 | Collection of FIM, transportation, handling, cleaning, cutting/shearing, drilling, bending/forming, welding with GTAW, including LP examination (final pass) and inspection of SS304L U-Straps, special supports, U-Clamps, end blind plates, poison plates, supporting strips, spacers, etc. as per approved drawings, technical specifications and site requirements. |
| 11 | Supply and Fixing of Zinc Plated Carbon Steel Anchor fastener of size M12X145mm long by drilling in concrete as per requirement for fixing plate Eps or other structures, as per Tender specifications, drawings and as directed by the EIC. |
| 12 | Collection of FIM, transportation, handling, cleaning, cutting/shearing, machining, threading/serration, pickling & passivation of up to 150 mm long threaded/serrated SS304L nipples of size ranging from 8NB to 25NB as per approved drawings and technical specifications. |
| 13 | Procurement and Supply of standard threaded end caps made of SS304L material, size ranging from 8NB to 25NB as per technical specification and approved drawings. |
| 14 | Collection of equipment like SS equipment, blowers, etc. from departmental stores within 12 km distance, Handling, Transportation, Pickling & Passivation, and Erection on floors/ staging members at various floor/elevations. It includes physical measurement, alignment, levelling (providing shims as required), and welding of lugs/legs to staging member/ floor EPs as per Nozzle Orientation drawings /equipment layouts, inspections as per technical Specification and as per directions of EIC. It also includes providing lifting, handling equipment and necessary safety gadgets for working at higher elevations and other consumables & non-consumables as required. |
| 15 | SS lining with 3mm thick SS304L plates/coils on walls, floors and MS EPs/structural including inspection / survey for surface finish, levelling, chipping and cleaning of surface to make it suitable for lining. It also includes handling & transportation of SS plates/coils from stores to site, pickling & passivation, physical measurement, De-coiling, straightening, cutting, edge preparation, forming/bending, erection on MS grids provided on the floor / walls/ foundation/ bund/ sumps as applicable and indicated in the drawings/site requirement, GTAW welding with ER309L, LP examination (final pass), vacuum box testing, cleaning etc. |
| 16 | Cleaning of cement, paint from the surface of installed SS lining/ equipment by grinding, scrubbing etc and pickling & passivation of surfaces as per approved procedure and technical specifications including supply of consumables, scaffolding, etc. |
| 17 | Fabrication and inspection of stainless steel equipment as per approved drawings and technical specifications. The work includes preparation of fabrication drawings, collection of FIM from department store, pickling, passivation, supply of requisite materials other than free issue material (FIM), setting up of fabrication shop including LPT & radiography, digitization of radiographs, documentation, packaging, safe delivery to site, return of balance FIM/ Scrap etc. |
| 18 | Collection of Centrifugal/ Plunger/ Canned motor Pumps from departmental stores within 12 km distance, Handling, Transportation, Cleaning and Installation on Pump Foundation. It includes physical measurement and cleaning of pump foundation, erection and levelling of base plate followed by grouting, bolting, installation on pump foundation as per technical Specification and approved drawings.Weight of pumps ranging from 100 kg to 300 kg. |
| 19 | Procurement, Supply, Fabrication and installation of closed-cell elastomeric nitrile rubber cold insulation along with Aluminium Cladding for Chilled water pipe and as per tender specification for pipe size up to 50NB. Surface area will be calculated based on standard OD of pipe. |
| 20 | Procurement, Supply, Fabrication and installation of closed-cell elastomeric nitrile rubber cold insulation along with Aluminium Cladding for Chilled water pipe as per tender specification for pipe size 50NB to 150NB. Surface area will be calculated based on standard OD of pipe. |
| 21 | Procurement, Supply & installation of hot insulation with aerogel (10mm thick) and rock-wool mat (120kg/ cum) and insulation rope/wire netting, finally cladding with 22G Al sheet as per tender specifications for pipe Size Less than 50NB. Surface area will be calculated based on standard OD of pipe. |
| 22 | Procurement, Supply & installation of hot insulation with aerogel(10mm thick) and rock-wool mat (120kg/ cum) and insulation rope/wire netting, finally cladding with 20G Al sheet as per tender specifications for pipe size 50NB to 250 NB. Surface area will be calculated based on standard OD of pipe. |
| 23 | Handling, Cleaning, alignment and Installation of NPS filters on foundation. It includes physical measurement and cleaning of foundation, erection and levelling of baseplate followed by grouting, bolting, installation on foundation, as per technical Specification and approved drawings.Average weight of NPS Filter: 300 Kg. |
| 24 | Collection of PCW Pumps from departmental stores within 12 km distance, Handling, Transportation, Cleaning and Installation on Pump Foundation. It includes physical measurement and cleaning of pump foundation, erection and levelling of baseplate followed by grouting, bolting, installation on pump foundation as per technical Specification and approved drawings.Average weight of PCW pumps: approximate 1150 Kg for 3 Nos. and 350Kg for 2 Nos. of pump |
| 25 | Collection of PHE for PCW System from departmental stores within 12 km distance, Handling, Transportation, Cleaning and Installation on Foundation. It includes physical measurement and cleaning of foundation, erection and levelling of base plate followed by grouting, bolting, installation on foundation as per technical Specification and design drawings.Average weight of PHE for PCW-I:550Kg(2nos.), and PChW: 450Kg(2nos.), PCW-II: 3000Kg (3nos.) |
| 26 | Procurement, supply, inspection and delivery of Ball Mechanical Float (MF) and Thermodynamic (TD) Steam Traps complete with Y-type Strainers, Sight Glasses and accessories, ANSI Class 150 flanged/threaded ends, conforming to ASTM, ASME and applicable standards, as per tender specifications & approved drawings. |
| 27 | 15 NB (SS 410/SS 420), TD type |
| 28 | 20 NB (SS 410/SS 420), TD type |
| 29 | 25 NB (SS 410/SS 420), TD type |
| 30 | 40 NB(SS 410/SS 420) MF type |
| 31 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of bubble tight shutt-off CHECK VALVE ( PISTON TYPE ) Non return valve of ANSI Cl # 150 rating, conforming to material ASTM A351 Gr.CF3/3M and standard BS 15761/API 602 along with companion flanges, bolts, nuts & gaskets as per tender documents and approved drawings |
| 32 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of bubble tight shutt-off wafer type, spring loaded double disc CHECK VALVE ( Dual plate TYPE) of ANSI Cl # 150 rating, conforming to material ASTM A351 Gr.CF3/3M and standard BS 1868 / API 594 along with companion flanges, bolts, nuts & gaskets as per tender documents and approved drawings |
| 33 | DN50 (ASTM A351 Gr.CF3/3M) |
| 34 | DN80 (ASTM A351 Gr.CF3/3M) |
| 35 | DN100 (ASTM A351 Gr.CF3/3M) |
| 36 | DN150 (ASTM A351 Gr.CF3/3M) |
| 37 | DN200 (ASTM A351 Gr.CF3/3M) |
| 38 | DN250 (ASTM A351 Gr.CF3/3M) |
| 39 | Procurement, supply and delivery of diaphragm operated type Pressure Reducing Valve of MOC Die cast Aluminium conforming to ASTM B-85/85M as per tender documents and approved drawings, for High pressure Air lines PRV range is 7Kg/cm2(g) to 5.5 Kg/cm2(g) and for low air pressure PRV range is 3.5Kg/cm2(g) to 0.3 Kg/cm2(g) |
| 40 | DN100 |
| 41 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of SS316 meshed (mesh size 40) Y Type Strainer socket Welded (Body MOC-SS ASTM A351 Gr.CF8/8M)) of ANSI Cl # 150 rating. |
| 42 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of SS316 meshed (mesh size 40) Y Type Strainer, flange end, (Body MOC-SS ASTM A351 Gr.CF8/8M)) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets. |
| 43 | DN100 |
| 44 | DN150 |
| 45 | DN200 |
| 46 | DN250 |
| 47 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of SS316 meshed (mesh size 40) Y Type Strainer, flanged end, (Body MOC- ASTM A 216 WCB/ASTM A 516 Gr ) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets. |
| 48 | DN100 |
| 49 | DN150 |
| 50 | DN200 |
| 51 | DN250 |
| 52 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of SS316 of Expansion Joint/ Bellows Cl # 300 rating along with companion flanges, bolts, nuts & gaskets as per technical specification and site requirement. |
| 53 | 150NB |
| 54 | 200NB |
| 55 | Procurement, supply and delivery of CS Pipes as per ASTM A53 Gr B,TYP-E & ASME B 36.10M, fabrication, erection on supports, fit-up, installation & alignment on supports, inline equipment like valves, reducers, elbows, TEE, along with fittings at various elevations/ floors, inclusive of welding & testing. This also includes preparation of fabrication drawings, supply of consumables E7018, instruments, scaffoldings, dimensional measurement, cleaning & painting, providing as built drawings, documentation as per technical specifications, approved drawings. |
| 56 | DN 15, SCH40 |
| 57 | DN 20, SCH40 |
| 58 | DN 25, SCH40 |
| 59 | DN 40, SCH40 |
| 60 | DN 50, SCH40 |
| 61 | DN 80, SCH40 |
| 62 | DN 100, SCH40 |
| 63 | DN 150, SCH40 |
| 64 | DN 200, SCH40 |
| 65 | DN 250, SCH40 |
| 66 | DN 300, STD Weight |
| 67 | Procurement, Supply & Fabrication of threaded /serrated nipples as per ASTM A53 Gr B,TYP-E & ASME B 36.10M with threaded length of 25mm of sizes ranging from 8NB to 40 NB. It included supply of material, cleaning, marking, cutting, threading/serration, cleaning & Painting, etc as per site requirement and technical specifications. |
| 68 | DN8Sch40 |
| 69 | DN15Sch40 |
| 70 | DN20Sch40 |
| 71 | DN25Sch40 |
| 72 | DN40Sch40 |
| 73 | Manufacture, inspection, shop testing, cleaning & Painting, supply and delivery of Elbows material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 74 | 40NBSch40 |
| 75 | 50NBSch40 |
| 76 | 80NBSch40 |
| 77 | 100NBSch40 |
| 78 | 150NBSch40 |
| 79 | 200NBSch40 |
| 80 | 250NBSch40 |
| 81 | 300NB STD WEIGHT |
| 82 | Manufacture, inspection, shop testing, cleaning & Painting, supply and delivery of Equal Tees, material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 83 | 40NBSch40 |
| 84 | 100NBSch40 |
| 85 | 150NBSch40 |
| 86 | Manufacture, inspection, shop testing, cleaning & Painting, supply and delivery of Concentric /eccentric reducer of material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 87 | 250X200Sch40 |
| 88 | 200X100Sch40 |
| 89 | 150X100Sch40 |
| 90 | 150X80Sch40 |
| 91 | 200X150Sch40 |
| 92 | DN25X20 Sch40 |
| 93 | DN40X25 Sch40 |
| 94 | DN50X20 Sch40 |
| 95 | DN50X25 Sch40 |
| 96 | Manufacture, inspection, shop testing, supply, delivery, and Installation of Stainless Steel 304L Respiratory manifold air station with isolation, plug valve, filter pressure regulator, distribution chamber, quick fit coupling and pipes and nipple for breathing air as per technical specifications and approved drawings. |
| 97 | Procurement, inspection, shop testing, supply and delivery of SS304L ball valve manual lever/ handwheel operated, 2peice, 2way, full bore, soft seated, cavity filled design, SORF flanged end connection along with companion flanges, bolts, nuts, washer, gaskets & spare parts confirming to ANSI classs-150 as per ASME B 16.34 & ASME B 16.5 of as per tender specifications, of following sizes: |
| 98 | Procurement, supply and delivery of SORF SS304L End blind flanged along with companion flanges, bolts, nuts, washer, gaskets & spare parts confirming to ANSI classs-150 as per ASME B 16.5 of following sizes as per tender specifications. |
| 99 | 100NB |
| 100 | 150NB |
| 101 | 200NB |
| 102 | 250NB |
| 103 | 300NB |
| 104 | Procurement, inspection, testing, supply and delivery of SS304L 15NB Ball Valve, pneumatically operated, 2peice, 2way, full bore, soft seated, cavity filled design, SORF flanged end connection along with companion flanges, bolts, nuts, washer, gaskets & spare parts confirming to ANSI classs-150 as per ASME B 16.34 & ASME B 16.5 as per tender specifications. |
| 105 | Procurement, inspection, testing, supply and delivery of SS304L 8NBSch40 Ball Valve (NAMUR type) along with Solenoid valves, pneumatically operated, 3peice, 2way, full bore, soft seated, cavity filled design, butt welded end connection, as per technical specifications. |
| 106 | Procurement, supply, delivery and installation MS hardware's confirming to ASTM A307 Gr. B & ASTM A 563 Gr.A, ASME B18.2.1 & ASME B18.2.2 like nuts, bolts, washers, pipe nipples, and end flanges with counter flanges, etc. of approved size and quality as per requirements, specifications, drawings complete all as directed at the Engineer in charge. |
| 107 | Procurement, supply, delivery and installation of SS304/316 hardware's confirming to ASTM A193 Gr.B8 & ASTM A 194 Gr.8, ASME B18.2.1 & ASME B18.2.2 like Bolts, Nuts, allen screws, wing nut, screw clamps, washers, springs etc of approved size as per requirements, specifications, drawings complete all as directed by the Engineer in charge. |
| 108 | Procurement, Supply, delivery and installation of three piece Union/couplings of following sizes, made of SS304L as per technical specification and approved drawings. |
| 109 | Procurement, Supply and delivery of \\"8X8 SS-304L TEES (ASTM A 403 TP 304L, BW, SMLS) to site as per drawings / specification and norms approved. |
| 110 | Procurement, Supply, delivery and installation of half coupling of following sizes, made of SS304L as per technical specification and approved drawings. |
| 111 | DN150X15 |
| 112 | DN250X15 |
| 113 | DN50X15 |
| 114 | DN50X25 |
| 115 | DN80X15 |
| 116 | DN80X25 |
| 117 | Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 118 | Making the opening in brick masonary for piping/ clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs, finishing the opening space and plastering, complete to match existing surface including disposal of mulba / rubbish to the nearest dumping ground. |
| 119 | Providing and applying one coat of cement primer and two coat of acrylic emulsion paint having VOC (volatile organic compound) content less than 50 grams/liter, of approved brand and manufacture on walls surface to receive specific finish, shade and colour. |
| 120 | Dismantling and removal of existing CS/SS structure, equipment, pipelines etc. from different elevations including arrangement of cutting tools, consumables, scaffolding, transportation, handling etc. to nearby location as instructed by EIC. |
| 121 | Procurement, Supply, erection, testing and installation of Gun metal Single headed internal hydrant valves with instantaneous stainless steel couplings of 63mm dia. With cast iron wheel ISI marked conforming to IS-5290 (Type-A) with blank stainless steel cap and chain, stainless steel orifice plate for reducing the pressure up to 3.5 kg/cm2 at outlet, etc. |
| 122 | Procurement, Supply, erection, testing and installation of Reinforced Rubber line hoses conforming to IS:636 type-B of 7.5m length with coupling. |
| 123 | Procurement, Supply, erection, testing and installation of FRP fire hose cabinet suitable for accommodating 2x7.5 metres long hose fitted with male-female coupling, branch pipe with nozzle, nozzle spanner etc. with double glass door, lock & key including indoor mounting arrangement. |
| 124 | Procurement, Supply, erection, testing and installation of branch pipe(63mm) with nozzle conforming to IS: 903 : 1984 as tender technical specification. |
| 125 | Procurement, Supply, erection of First aid hose reel full swinging type with 30m length x 20 mm dia rubber lined pipe with ABS plastic shutoff nozzle of 6mm dia. The hose reel shall conform to IS requirements. Rate shall include 25mm dia pipe connection from riser to hose reel including flexible pipe, sockets, nipples, elbows and 25 mm ball valve. etc., complete. |
| 126 | Procurement, Supply, testing and safe delivery to site of C.I. Gate Valve (Confirming to IS:14846, PN1.6) including MS matching flanges(conforming to IS: 6392 Table-17), SS bolts, nuts and gaskets complete as specified and of the sizes mentioned : |
| 127 | DN150 |
| 128 | DN200 |
| 129 | Procurement, Supply, testing and safe delivery to site of Dual plate spring loaded check valve(API:594, API-6D, PN1.6) including MS matching flanges(conforming to IS: 6392 Table-17), SS bolts, nuts and gaskets complete as specified and of the sizes 200mm dia. |
| 130 | Procurement, Supply, testing and safe delivery to site of 80mm dia. Butterfly valve cast iron PN 1.6 of the following size complete with S.S.316 disc, bolts, nuts, washers and neoprene gaskets as per specifications. (Wafer Type Butterfly Valve, Body : Cast Iron, Disc: AISI 316, EPDM Liner, Shaft: SS 416 Spline Single Piece, Aluminium Handle Up to 6\\". Test : Shell 24 Kg, Seat 17 Kg Hydro) including matching flanges. Including all necessary accessories etc. |
| 131 | Procurement, Supply, testing and safe delivery to site of Four Way Fire Brigade Inlet to Hydrant out side the Building (Gate Valve valve and non return valve to be paid separately)complete in all respects :150 mm dia |
| 132 | Procurement, Supply, testing and safe delivery to site of Pressure gauges of not less than 100mm dia dial of pressure range 0-10kg/cm 2 complete with shutoff valve duly calibrated before installation. |
| 133 | Procurement, Supply, safe delivery to site, cleaning, fabrication, erection and testing of Heavy class pipes plain ended/bevel ended conforming to IS-1239 (part-1) & IS-3589. it includes installation of inline fittings & special accessories like tees, elbows, bends conforming to IS 1239 (part-2) including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastener, civil breakage, making good the same etc. Painting with a primer coat and two coats of postal red enamel etc. Complete for below sizes. |
| 134 | 200 mm dia |
| 135 | 150 mm dia |
| 136 | 100 mm dia |
| 137 | 80 mm dia |
| 138 | 25mm dia |
| 139 | Supply, erection, testing and installation of 80mm dia Orifice plate for reducing pressure form 7 Kg/sq.cm to 3.5 Kg/sq.cm including matching flanges, bolts, nuts and gaskets complete as specified and of the sizes mentioned : |
| 140 | Design, preparation of detail drawing, manufacture, assembly, inspection, shop testing, packing, safe delivery and guarantee of wafer type, double disc Non return valve of size 200NB of (Body-ASTM A216 Gr. CF8/8M, Plate- ASTM A 351 Gr. CF8/8M) ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets. |
| 141 | Manufacture, inspection, shop testing, supply and delivery of Elbows material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 142 | 150NB |
| 143 | 200NB |
| 144 | Manufacture, inspection, shop testing, supply and delivery of Equal Tees, SCH.40 x SCH.40 material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 145 | DN100 |
| 146 | DN200 |
| 147 | DN150 |
| 148 | Manufacture, inspection, shop testing, supply and delivery of REDUCING TEE STD.40 x SCH.40 material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 149 | DN100X50 |
| 150 | DN100X80 |
| 151 | DN150X80 |
| 152 | DN200X150 |
| 153 | Manufacture, inspection, shop testing, supply and delivery of Concentric reducer STD.40 x SCH.40 material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 154 | DN200X150 |
| 155 | DN200X100 |
| 156 | DN150X80 |
| 157 | Manufacture, inspection, shop testing, supply and delivery of HALF COUPLING, DN80X25 material as per ASTM A 182, F304/F304L (Standard Protection) dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification. |
| 158 | Manufacture, inspection, shop testing, supply and delivery of Hose Reel Stop Valve of 25NB (Full bore quarter Turn as per IS 884 & MOC: Body Brass or Stainless Steel as per ASTM B283 / ASTM A182) |
| 159 | Manufacture, inspection, shop testing, supply and delivery of Single-Headed Landing (Hydrant) Type-A Valves with end cap of Size inlet 80NB and Outlet 63NB as per code IS:5290 and MOC of Gunmetal as per Code IS:5290 detailed against the approved procedure and technical specification. |
| 160 | Third party inspector (TPI) fro performing the inspections like matrial verification, pickling & passivation, bend inspection, fitup, welding, Visula inspection, root & final LPE, RT inspections, pressure testing, review of documents, etc. to meet quality requirement of entire work as per technical specifications by organising third party inspectors. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender