Tender For Uws Scheme Under Panisagar Nagar Panchayet/ Sh:- Running Maintanace And Operation , Upkeepment Including Watch & Ward Of 0.30 Mgd Capacity Water Treatment Plant Under Dws Sub Division Panisagar During The Year 2026-27.
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
19414
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Uws Scheme Under Panisagar Nagar Panchayet/ Sh:- Running Maintanace And Operation , Upkeepment Including Watch & Ward Of 0.30 Mgd Capacity Water Treatment Plant Under Dws Sub Division Panisagar During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and washing of intake well by lifting of deposited clay/sand from the intake well complete, (at least twice in a year) as per direction of Engineer -in- Charge |
| 2 | Clearing and washing of Clari flocculator by lifting of deposited clay/ sedimented particles from the Clari flocculator at required site as per direction of the Engineer in Charge. |
| 3 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minimum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 4 | Supplying bamboo (1st class) 85 mm to 100 mm dia and making shoe with end tapered up to 300 mm from the bottom of the bamboo as per drawing and specification. |
| 5 | Handling and driving bamboo (1st class) 85 mm to 100 mm dia up to the length required by heavy hammer as per drawing and specification. |
| 6 | Providing and fitting, fixing bamboo (1st class) 85 mm to 100 mm dia for horizontal, diagonal bracing, strut etc. with nails / spikes and binding wire (GI 2.00 mm) as per drawing and specification. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Centring shuttering including struttings, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 10 | Neat cement punning. |
| 11 | 12 mm cement plaster of mixCement mortar 1:6 (1 cement : 6 fine sand) |
| 12 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 13 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 14 | 6 mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Repairing line / top shaft of different capacity V.T. pumps by welding, grinding, threading, centring etc as per specification and the direction of the Engineer-in-charge. |
| 16 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.0.5 - 1.5 HP |
| 17 | Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 18 | 35 - 40 HP |
| 19 | 25-30 HP |
| 20 | Charges for lifting of pump, motor, columnpipeetc. From intake well and stacking the same at suitable place asper specification and the direction of the Engineer-in-charge. |
| 21 | ProvidingandfixingC.I.sluicevalves(with cap)complete with bolts, nuts, rubber insertions etc. ( the tail pieces if requiredwillbepaidseparately)asper CPWDspecification and direction of the Engineer - in - charge. |
| 22 | 100 mm dia A. PN - 1.6 |
| 23 | 150 mm dia A. PN - 1.6 |
| 24 | 300 mm dia A. PN - 1.6 |
| 25 | Providing and fitting fixing of 3 pole power contractor type 415V,50Hz (L&T)make as per direction of the Engineer-in-Charge |
| 26 | i. ML 1.5 |
| 27 | ii. ML 2 |
| 28 | iii. ML 3 |
| 29 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the panel board as per specification and direction of the Engineer-in charge. |
| 30 | Providing and fitting fixing of moving iron type, Range 0- 100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the panel board as per specification and direction of the Engineer-in-charge. |
| 31 | Providing and fitting fixing 3 phase Indicating lamp fitted with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer in-charge. |
| 32 | Providing and fitting fixing Bimetal overload relay type series L&T make] as per direction or the Engineer-ln-charge. i.13-21 AMP |
| 33 | ii .20-32 AMP |
| 34 | iii.28-42 AMP |
| 35 | Providing and fitting fixing of slandered operation coil for 415V,50Hz,L&T make as per direction of the Engineer-in-Charge. i.ML 1.5 |
| 36 | ii.ML 2 |
| 37 | iii. ML 3 |
| 38 | Providing and fitting fixing of Thermal Timer Type GT 200,415V,50Hz for 5-18 sec,L&T make as per direction of the Enl!ineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender