Tender For Repair Of Chc Building At Dhussara, Tehsil Amb, Distt. Una (Sh:- Construction of Attached Toilet With Doctor Duty Room At Chc Dhussara) Deposit Work.
Tender Value
1.52 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
3100
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Chc Building At Dhussara, Tehsil Amb, Distt. Una (Sh:- Construction of Attached Toilet With Doctor Duty Room At Chc Dhussara) Deposit Work.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing doors, windows and clerestory windows (Steel or wood) Shutter including Chowkhats, Architrave, holdfasts etc complete and other attachements etc. complete and stacking the material within 50 metres lead as per direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions make of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge for fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions ake of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 4 | Providing and fixing glazing with float glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 5 | Providing and fixing 12mm (twelve milimeter) thick Phenol bonded pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 with decorative lamination on both sides Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 6 | Providing and fixing anodised aluminium grill Hindalco, Jindal, Indian Aluminum Co. (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm( two hundred millimeter) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement (Only weight of grill to be measured for payment) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in any floor/height in cement mortor 1:4 (one cement: four coarse sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 9 | 15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:4 (one cement: four coarse sand) upto all floor level as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 10 | Providing and laying Vitrified tiles 300x300 in floor with different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS:15622, of approved make Kazaria, Nitco, Somany, Orient Sell, RNK, Johanson & Johanson in all colours shade, over 12 mm thick bed of cement mortar 1:3 (one cement isto three coarse sand) including grouting of joints complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 12 | Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer J.K wall Putty/ Brila White Putty, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 13 | Finishing walls with 100% (Hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm (fifty grams)/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (ASIAN-APEX ULTIMA/NEROLAC- wheather Shield)of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (at the rate one point four three liter per ten square meter) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (at the rate of zero point nine zero liter per ten square meter) as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 14 | Providing and fixing 150mm bright finished brass hard drawn hooks and eyes as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 15 | Providing and fixing 300x16mm(three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 16 | Providing and fixing 200x10mm (two hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 17 | Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 18 | Providing and fixing Single piece WC with PP soft close seat cover, Hinges, Dual cistern fitting accessories and acessories set (size 370x690x680 mm) three hundred seventy into six hundred ninty into six hundred eighty milimeter (Jaquar No. CNS-WHT-851S300SPP) S-Tap 300 mm (three hundred milimeter) complete in all respect as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 19 | Providing and fixing wash basin with C.I. bracket , 15mm (fifteen milimeter) dia CP Brass pillar trap 32mm (thirty two milimeter) C.P. brass waste of standard pattern of approved quality of preferred make of CERA/Hindware, including painting of fittings and brackets, cutting and making good the walls wherever required white Vitreous China Wash Basin size (Hindware neptune No. 10072 of size550x400 mm) with 15mm (fifteen milimeter) CP brass single hole basin mixure as per CPWD specifications 2019 complete and direction of Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 20 | Providing and fixing wash basin with full length pillar fixing accessories (size 560x430x195 mm) five hundred sixty into four hundred thirty into one hundred ninty five milimeter) (Jaquar No. FLS-WHT-5701) with C.I. brackets complete in all respect as per CPWD specifications 2019 complete and direction of Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 21 | Providing and fixing 32mm (thirty two milimeter) dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fitting complete as per CPWD specifications 2019 complete and direction of Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 22 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm {(fifteen millimeter into fifty millimeter)} of approved quality of preferred make as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 23 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass of approved quality of preferred make as per standard bidding document complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 24 | Providing and fixing C.P. brass soap Dish Holder of preffered having length of 138mm(one hundred thirty eight millimeter) breadth 102mm (one hundred two millimeter) , height of 75mm (seventy five millimeter) with concealed fitting arrangements, weighing not less than 105 gms.(one hundred five grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 25 | Providing and fixing PTMT towel rail complete of approved quality of preferred make as per standard bidding documentwith brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm, weighing not less than 190 gms (one hundred ninety grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 26 | Providing and fixing C..P. brass toilet paper holder as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 27 | Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass stop cock (concealed) of standard design and approved make of Kingston, Gem, Parko , Techno, Jal , ESS ESS, Jaquar, Seiko conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 28 | Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass long nose bib cock of preferred make Jal, Cera, Jaquar, Hindware, Prayag conforming to IS standards and weighing not less than 810 gms (eight hundred ten grams) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 29 | Providing and fixing 15mm (fifteen milimeter) Hindware C.P. Brass Pillar cock of approved quality and colour of approved make and quality as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 30 | Providing and fixing 15 mm (fifteen millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata, BST, Parkash Surya as per standard bidding document with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 31 | Providing and fixing 15mm (fifteen millimeter) nominal bore ball valve (brass) Zoloto, Sant, L&K, Leader make as per standard bidding document, High or low pressure, with plastic floats complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 32 | Providing and fixing PVC floor trap / nahani trap of approved quality and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 33 | Providing and fixing C.P. grating of approved quality and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 34 | Providing and fixing soil, waste and vent pipes, PVC pipe as per IS:1729 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 35 | Making connection of G.I. distribution branch approved quality of preferred make with G.I.main of 25 to 40mm ( twenty five to forty millimeter) nominal bore by providing and fixing tee,including cutting and threading the pipe etceteraetera complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 36 | Providing and fixing PTMT Jet Spray of approved quality and coloured with 1.50 mtr (one point five zero meter) tube as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 37 | Providing and fixing 150 mm (one hundred fifty milimeter) diameter Hindware C.P. brass shower rose with 15mm (fifteen milimeter ) or 20mm (twenty milimeter) inlet as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 38 | Providing and fixing 15mm (fifteen milimeter) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make tripple layer 1000 liter capacity including all fittings as per CPWD specifications 2019 complete and direction of Engineer in chargeincluding entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. |
| 40 | Providing and fixing angular stop cock with wall flange including fitting and all accessories as per CPWD specifications 2019 complete and direction of Engineer in chargeincluding entire carriage of materials with in all leads and lifts and other incidentials . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender