Tender For annual repair & maintenance of Internal Kasumpti Colony Road Km 0/000 To 2/000. (Sh:- Construction of Parking Space With Type-V 15 To 18 Block Under Kasumpti Section). (Excluding Gst)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2026
2 days left
EMD
19000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Internal Kasumpti Colony Road Km 0/000 To 2/000. (Sh:- Construction of Parking Space With Type-V 15 To 18 Block Under Kasumpti Section). (Excluding Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm (Thirty centimetre) in depth, 1.5 m (One point five metre) in width as well as 10 sqm (ten Square Metre) on plan) including getting out and disposal of excavated earth all lead and lift as directed by Engineer-in-charge and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ) Any loss to the public and private propriety, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges including extra 150 mtrs lead. (i)All kinds of soil. (Excluding GST) |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of prescribed charges of dumping to the owner of dumping site as per satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. (Excluding GST) |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:5:10 (One cement : five coarse sand) : ten graded stone aggregate 40 mm nominal size) (Excluding GST) |
| 4 | (ii) 1:3:6 (One cement : Three coarse sand) : Six graded stone aggregate 20 mm nominal size) (Excluding GST) |
| 5 | Providing weepholes in retaining / breast wall with 100 mm dia PVC pipe lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 6 | Backfilling behind retaining wall / breast wall, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Mild steel and Medium Tensile steel bars (Excluding GST) |
| 8 | Disposal of excavated earth work by debris material upto site on approved dumping siteapproved by M.C. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 9 | Stone soling properly hand packed filling interstices with Kharanja stone and including watering and ramming consolidating with hand durmet complete under floor to the requisite gradient and camber including spreading watering and rolling of binding materials complete as per HP PWD specification 100mm spread thickness (finished work including materials and labour) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 10 | Dismantling steel work in built up sections including distempering and stacking with 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Channels, angles , tees and flats including all gusset plates, bolts nuts, cutting rivets, welding. (Excluding GST) |
| 11 | Dismantling G.I pipes (external work) including excavation and refilling trenches after taking out the pipes , manually/by mechanical means including stacking of pipes within 50 metres , carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge. (i) 15mm to 40 mm nominal bore. (Excluding GST) |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm dia nominal bore (Excluding GST) |
| 13 | Refixing G.I. pipes complete with G.I. fittings including trenching and refilling etc, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm dia nominal bore(Excluding GST) |
| 14 | Providing and fixing G.I. Union in G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making long screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( New work ) (a) 40 mm dia nominal bore (Excluding GST) |
| 15 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work. (Excluding GST) |
| 16 | Labour Rate (Excluding GST) |
| 17 | Providing and laying 100 mm thick faciory made cement concrete interlocking paver block of M -50 grade made by block making machines with strong vibratory compaction , of approved sixe , design & shape , laid in requires colour and pattern over and includes 50 mm thick compacted bed of coarse sand , filling the joints with line and sand etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender