Tender For Maintenance And Repair Of D-Type, E-Type, F-Type Quarters And Boundary Wall At Kanupur Irrigation Colony, Rimuli .
Tender Value
21.43 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
21440
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair Of D-Type, E-Type, F-Type Quarters And Boundary Wall At Kanupur Irrigation Colony, Rimuli .
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Superintending Engineer, Kanupur Canal Division No. II, Rimuli, Dist:- Keonjhar Name of Work:-“Maintenance and Repair of D-Type, E-Type, F-Type quarters and boundary wall at Kanupur Irrigation Colony, Rimuli ”. Contract No: SE, KCD NO-II-10/2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER# NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SlNo. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT WITHOUT GST TOTAL AMOUNT In Words |
| 2 | Dismantling Brick or stone masonry in lime or cement mortar under 3.0mtr height including stacking the useful materials for reuse and removing the debris within 50m Lead as per the direction of Engineer-in-charge |
| 3 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, and fastening and stacking the same for reuse and removing the debris within 50 mtr. Lead as per the direction of Engineer-in-charge. |
| 4 | Removing old lime or cement plaster from walls including racking out joints 12 mm deep and removing the debris within 50 mtr. Lead as per the direction of Engineer-in-charge. |
| 5 | Scraping old paint with scrapers,sand papering and washing with soap water or soda including scaffolding charges upto 5M height as per the direction of Engineer-in-charge. |
| 6 | Providing 1st class Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth with cost and carriage of all materials with labour etc. complete as per the direction of Engineer-in-Charge (50% reused brick). |
| 7 | 16mm thick cement plaster (1:6) over brick work with cost, conveyance, royalty, EMF, DMF & additional charges of all materials etc. complete and cost of all materials as per the direction of Engineer-in-Charge. |
| 8 | 16mm thick cement plaster (1:6) over brick work with cost, conveyance, royalty, EMF, DMF & additional charges of all materials etc. complete and cost of all materials as per the direction of Engineer-in-Charge. |
| 9 | Cement punning per sqm with cost, conveyance, royalty,EMF, DMF & additional charges of all materials etc. complete and cost of all materials as per the direction of Engineer-in-Charge. |
| 10 | Wall Priming one coat with any approved primer with cost, conveyance and royality of all materials etc. |
| 11 | MS panelled Door single leaved shutter with MS frame over all size including frame :1830mm Heightx910mm Width made out of line following materials conforming to revant ISS Frame :- 30x30MS Angle Shutter style :- Top & bottom rail 25x25x3mm MS Angle Door Panel:- 1.0mm CR Sheet, Panel stiffener covering width of leaf -19x5mm. MS Flat 3 nos Hinges size:-100mm 3nos bought out as per ISS Hold fast 30x30x5mm MS Angle 150mm length bifurcated at the Tip: 3nos on each side Handle:- 19x5mm MS Flat Fabricated- 2 Nos. Aldrop-2 nos bought out as per ISS Tower Bolt:- 2nos bought out as per ISS. Approximate weight-36 kg. |
| 12 | MS panelled Window double leaved shutter with MS Frame & Grill over all size including frame:-1220mm Height x 910mm Width made out of the following materials conforming to revevant ISS Frame:- 35x35x6mm MS Angle,Window Panel:- 1.0mm CR Sheet, Panel stiffener covering width of each leaf -19x5mm. MS Flat 2 nos on each leaf Hinges size:-100mm 4nos(2nos on each side) bought out as per ISS Hold fast 35x35x6mm MS Angle 100mm length bifurcated tip 2 nos,one each side Handle - 19x5mm MS Flat 2 nos Fabricated (inside).Tower bolt:- 4 nos. bought out as per ISS . Hori Grills-12mm MS Round at 100mm spacing. Approximate weight-39 kg. |
| 13 | Labour for fitting and fixingas MS doors,windows and ventilators in proper position etc as per Engineer-in-charge. |
| 14 | Priming one coat with any approved primer on iron work including sand papering, polishing the surface with cost, conveyance, royality of all materials and cost of primer etc . |
| 15 | Weather coat two coats with approved shade including cost of materials & labour charges. etc. complete as per the direction of Engineer-in-charge. |
| 16 | Painting two coats with approved Enamel paints on new steel/wood work including cost of materials and labour etc. complete. |
| 17 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 2mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg/Sqm,applying and laying plastic felt membrane with 10 c.m overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot bitumen @ 1.2Kg/Sqm etc complete. |
| 18 | LED Luminaire for Road And Steet Light. |
| 19 | Procelain 23\\" IWC (Odisha pan). Total in Figures 2143430.04 2143430.04 INR Twenty One Lakh Forty Three Thousand Four Hundred & Thirty and Paise Four Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender