Tender For Renovation Of 2 Nos. Rooms Of Field Hostel At Bbmb Colony Slapper.
Tender Value
5.24 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
10480
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of 2 Nos. Rooms Of Field Hostel At Bbmb Colony Slapper.
BOQ
| Sl. No. | Item Description |
| 1 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled(a) Doors of area 3 sqm and below 8.26(a) |
| 2 | b) Windows of area 3 sqm and below 8.26(b) |
| 3 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect (b) Double rebate CSR 2020 Item No. 18.29(b) |
| 4 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect (a) Single rebate CSR 2020 Item No. 18.29(a) |
| 5 | Factory manufactured solid flush door fixed in position iron hinges, etc(excluding the cost of any fittings other than specified above but insluding labour for fixing the same in position CSR 2020 item No 17.27( C ) (iii) Decorative with teak facing on both sides edges lipped with teak with laminated core:-(iii) 30 mm thick |
| 6 | Kail wood doors shutter windows shutter Paneled, glazed or glazed and paneled including hinges, screw chokes, cleats and cords etc. complete fixed in position (CSR Item no.17.17(i)(b) 35 mm thick |
| 7 | Wire gauze door shutter with Kail wood without springs housed in chowkhats (Single Leaf) CSR 17.17(ii)b 30 mm Thick |
| 8 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc (CSR Item no.16.16) |
| 9 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR Item no.16.17) |
| 10 | Providing & fixing 4\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. CSR 2020 17.68 |
| 11 | Providing & fixing 9\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. CSR 17.70 |
| 12 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish CSR Item No. 16.65 |
| 13 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed A&C Slip No. 1 to CSR 2020 Item No. 16.12 |
| 14 | Erection of light fixtures on wall/ ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete: Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture CSR 2020 Item No. 34.28(A)(ii)(a) |
| 15 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. CSR 2020 Item No. 30.94 |
| 16 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to bespecified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired and polished (a) 600mmx600mm CSR 2020 Item No. 14.112 (a) |
| 17 | Nicking Cement Concrete Surface (Over 28 days old including preperation and laying slurry. CSR 2020 10.31 |
| 18 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. CSR 2020 14.72 |
| 19 | Dismantling glazed tiles (to be carefully removed) CSR 2020 8.35 |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/HighlyGlossfinish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by themanufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete CSR 2020 14.127. |
| 21 | Dismantling, disjointing, removal of G.I. pipelines, specials, valves and fittings complete in all respects. CSR Item No. 28.63 (a) 15mm internal diameter pipeline |
| 22 | Dismantling, disjointing, removal of G.I. pipelines, specials, valves and fittings complete in all respects. CSR Item No. 28.63(b) 20mm internal diameter pipeline |
| 23 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75x75mm CSR 2020 Item No. 30.85(a) |
| 24 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (b) 15 mm i/dCSR 2020 Item No.28.35(a)A&C Slip No. 4 to CSR 2020 |
| 25 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing cutting, threading Inside building complete. (b) 20 mm i/d CSR 2020 Item No.28.35(b)A&C Slip No. 4 to CSR 2020 |
| 26 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.CSR-2020 item No. 30.88 (a) European/ Indian/ Orissa WC |
| 27 | ( c ) Wash Hand Basin/ Urinal Pot .CSR-2020 item No. 30.88 ( c ) |
| 28 | ( e ) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap CSR-2020 item No. 30.88 ( e ) |
| 29 | Providing and fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect ( i.) C.P. brass Bib cock long nose/ long body foam flow without flange CSR-2020 item No. 30.65) (A) (i)] |
| 30 | Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(a)15mm i/d G.I. Union[CSR-2020 item No. 28.40 (a)] |
| 31 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii) Size 550 mm x 400 mm x 815 mm CSR 2020 Item No. 30.32 (ii) |
| 32 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin. CSR Item No. 30.43(i) |
| 33 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) size 600mmx450mm [CSR 2020 item No. 30.61 (a)] |
| 34 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. CSR-2020 item No. 30.20 |
| 35 | Providing and fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 15mm Concealed stop cock with flange.[CSR 2020 item No. 30.66 (b)] |
| 36 | Providing and fixing in position PVC Flexibel tube connection of approved make (to the approval of Engineer-in-charge) complete in all respects. (f) PVC tube connection of size 15mm x 450mm with CP Brass nut. CSR 2020 item no. 30.72 (b)] |
| 37 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.CSR 2020 item No. 30.80 |
| 38 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (a) C.P. brass towel Rails size 15mm dia 610mm long CSR 30.58(a) |
| 39 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (b) C.P brass towel ring CSR 30.58 (b) |
| 40 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-incharge ) fixed in with rawl plugs and C.P brass screws complete in all respect. (b) C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm CSR Item No. 30.59 (b) |
| 41 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-incharge ) fixed in with rawl plugs and C.P brass screws complete in all respect. (a) CP brass Acrylic Shelf size 560mmx130mm CSR Item No. 30.59(a) |
| 42 | Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. i) CP Brass rain Fall Shower arm 15\\" length round chrome CSR Item No. 30.56 D(i) |
| 43 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. CSR Item No. 30.60 |
| 44 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity.(without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.CSR 2020 Item No. 30.3 (a) |
| 45 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. (a) with CP Brass nut CSR 2020 Item No. 30.8 (a) |
| 46 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect. Single lever concealed divertor of bath and shower system (with body and upper part) CSR 2020 Item No. 30.70 (a) |
| 47 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge CSR 2020 8.44 |
| 48 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. CSR Item No. 13.81 |
| 49 | PVC LED Surface/ Panel light 36 Watt of make Havells, Crompton, Fybros or equivalent as per satisfaction of the Engineer-in-charge (NS Item) |
| 50 | Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:-Plastic Surface Box for Modular Accessories Eight Module CSR 34.15 (xxxv)(e) |
| 51 | Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc. Plastic Surface Box for Modular Accessories Three Module CSR 34.15 (xxxv) (b) |
| 52 | Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.Plastic Surface Box for Modular Accessories One/Two Module CSR 34.15 (xxxv) (a) |
| 53 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- 6/10amp. One Way Modular Switch (One Module) CSR 34.15 (xi) |
| 54 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-16/20amp. One Way Modular Switch with Indicator (One Module) CSR 34.15 (xiii) |
| 55 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- One Way Modular Bell Push (One Module) CSR 34.15 (xiv) |
| 56 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- 6amp. 2/3 Universal Modular Shuttered Socket (two Module) CSR 34.15 (xv) |
| 57 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- 16/20amp. Universal Modular Shuttered Socket (two Module) CSR 34.15 (xvi) |
| 58 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-Step type Modular Electronic Fan Regulator 100watts (One Module) CSR 34.15 (xviii) |
| 59 | Providing and fixing 12 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade-I, IS : 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated MS pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm MS flat 10 cm long and rawl plugs 50 mm long (designation 10 no) etc all complete CSR 2020 17.56 |
| 60 | Silk Door Curtains of GSM 280 with cascading pleats and specifications as per quotation attached. (NS Item) |
| 61 | Providing Exhaust fans of make Havells, fybros, crompton, usha or equivalent as per the satisfaction of Engineer-in-charge complete in all respect (NS) |
| 62 | Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:-Erection of Exhaust fan with louver shutter on the wall/ window grill CSR 34.28 A ( c ) |
| 63 | Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm CSR 31.1 (a) |
| 64 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- Call Bell 220/230 volts AC Ding Dong CSR 34.15 (xxviii) |
| 65 | Spirit polishing two coats including a coat of wood filler on wood work. CSR 16.45 |
| 66 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete. CSR 2020 17.22 (v) |
| 67 | Providing & fixing 4\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. CSR 2020 17.75 |
| 68 | Providing & fixing 6\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. CSR 2020 17.76 |
| 69 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). CSR 2020 Item No. 17.22 (iv) |
| 70 | Iron Fittings ISI Marked Hinges 75 mm M-70 (a) |
| 71 | Iron Fittings ISI Marked Hinges 75 mm M-70 (b) |
| 72 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (i) overall size 1 sqmm (Un- sheathed) CSR Item No. 34.09 (i) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender