Tender For Improvement Of Bituminous Road Supply/Fixing Mother Teresa School To Daya Lama House, Dip Chakraborty House To Vishal Das House, Pradip Sandhya House To Sourabh Rakshit House At Ward No 46
Tender Value
70.35 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
15 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Bituminous Road Supply/Fixing Mother Teresa School To Daya Lama House, Dip Chakraborty House To Vishal Das House, Pradip Sandhya House To Sourabh Rakshit House At Ward No 46
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately (Reference to MoRT&H's specification clause 202). |
| 2 | By Mechanical Means |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rolling with 3wheeledsteel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). |
| 4 | By Manual Means Grading-2 (Table 400-9) Using Screening Crushable type such as Moorum or Gravel, Using Screening (Table 400-10), Type-B (11.2 mm aggregate) |
| 5 | Providing and applying tack coat with paving bitumen of VG-10 grade conforming to IS:73 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). |
| 6 | On bituminous surface @ 0.20 kg 0.3kg /sqm. |
| 7 | Bituminous Macadam (Grading - II, for compacted thickness of upto 50 mm) with Pakur Variety |
| 8 | With Continuous Type HMP (60-90 TPH) for Grading 2 (19 mm nominal size) Layer Thickness 50-75mm |
| 9 | Providing and laying seal coat sealing the voids in a bituminous surface laid to thespecified levels,grade and cross fall using. TypeA and Bseal coats(Reference to MORT&H's specification clause511)Providing and laying of premixsand seal coat with HMPof appropriate capacity not less than75 tonnes/hours using crushed stone chipping and penetration bitumen of suitable grade. |
| 10 | Case-I : Type B Providing and laying of premix sand sea lcoat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 11 | Providing and laying mastic asphalt by mechanical means done in a centralised batching plant with appropriate built- in pollution control units with specified aggregates and lime stone powder (with Calcium Carbonate content not less than 80%) and approved grade of industrial grade bitumen as per approved design mix, transporting the hot mastic ashphalt to the worksite by thermocontainer with the arrangement of maintaing specified temperature during transport,laying with a paver finisher for spreading and floating the plastic mix uniformly on the surface to the specified width and thickness at correct grade and camber through its heated, distortion free steel float and turning sword distributors, applying uniform size of bitumen coated stonechips at a specified rate, on the laid surface through a power driven chip spreader as per the procedure laid down in Annexure - II of IRC : 107 (2013) all complete as per clause 516 along with IRC : 107 for materials and design mix etc. |
| 12 | 25 mm Thick Mastic Asphalt |
| 13 | Direction and Place Identification Signs with size more than 0.9 sqm size Board |
| 14 | Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mmx6mm,2Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 15 | 18% GT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender