Tender For Maintenance And Repair To Joinery, Flooring, Cupboards, Pantry, Toilets Bath And Its Connected Sanitary Fittings Alongwith Associated B/R Work Services At Af Stn Barrackpore Under Ge (Af) Barrackpore.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Sep 2026
12 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair To Joinery, Flooring, Cupboards, Pantry, Toilets Bath And Its Connected Sanitary Fittings Alongwith Associated B/R Work Services At Af Stn Barrackpore Under Ge (Af) Barrackpore.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and removing from site complete all as spd and directed. |
| 2 | Taking down chowkhats with shutter (without taking of shutter from the frame) n.exc.1.5 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutter of any description exc.1.00 sqm. but n.exc. 2.00 sqm each complete all as specified and directed. |
| 4 | Taking down shutter of any description n.exc. 1.00 sqm each complete all as specified and directed. |
| 5 | Resecuring or easing and adjusting without taking down shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter n. exc 1 sqm each complete all as specified and directed. |
| 6 | Taking down shutters exc 1.00 Sqm but not exc 2.00 Sqm carefully from the frame and refixing in the same opening after necessary repair including easing, welding or any required item such as stay handle etc. and making good the existing surface complete all as specified and directed. |
| 7 | Repair/adjusting aluminium door for holding in position to shutters in frame including replacing of old damaged adjusting bolts, cleats, rubber gas- kits, screws and aluminium sections less than 1kg for each shutters and making proper functionable to aluminium doors/windows complete all as specified and directed. |
| 8 | Dismantling timber scantlings in framed work 40 sqcm and over in section, in any position complete all as specified and directed. |
| 9 | Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removal of rubbish from the site complete all as specified and as directed. |
| 11 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 12 | Supply and fix 2nd class hard wood 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile shall be as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | Supply and fix 30mm thick factory made flush shutters, solid core construction, with block board core and plywood panels, commercial type on both sides complete all as specified and directed. |
| 14 | Supply and fix 30mm thick factory made flush shutters, solid core construction, with block board core and plywood panels, commercial type on both sides with both face is covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 15 | Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 16 | Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 17 | Supply and fix factory made PVC door shutters 30mmm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 18 | Supply and fix factory made PVC wire gauzed door shutters 30mmm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wire gauzed shutter, the wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and jointed together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed. |
| 19 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 22 | Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 23 | Supply and fix 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 24 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 25 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 26 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 27 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 28 | Supply and fix in repair door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 29 | Supply and fix in repair double action floor spring heavy duty hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed. |
| 30 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in levelling course for laying floor finishes etc complete all as specified and directed. |
| 31 | Material and labour for 40mm thick cement concrete (1:2:4) (using 20mm graded stone aggregate) type B-1 as in floors and finished even and smooth with using extra cement complete all as specified and directed. |
| 32 | Supply and fix door draft stopper/bottom sealing strip with twin-foam slide-on guards with rigid metal or silicone sweeps to be placed along the base of a door complete all as specified and directed. |
| 33 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 34 | Material and labour for vitrified ceramic tiles (premium quality) 8 to 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 35 | Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 36 | Material and labour for glazed ceramic tiles of size 300x450x7 mm or 300x200x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 37 | Supply and fix in repair Vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm dia brass chromium plated waste fittings for glazed ware sinks, basin with long screws shanks and fly nuts flange end bedded in red lead cement and other end fixed including 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 800mm long PVC waste pipe complete all as specified and directed |
| 38 | Supply and fix in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling complete all as specified and directed. |
| 39 | Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including P or S trap fixed on floor including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 40 | Supply and fix in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flushing pipe complete all as specified and directed. |
| 41 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 42 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 43 | Supply and fix in repair 20 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 44 | Supply and fix in repair 15 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 45 | Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 46 | Supply and fix in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 47 | Supply and fix in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed. |
| 48 | Supply and fix in repair 110 mm bore PVC (SWR) bends of any radius with access door complete all as speified and directed. |
| 49 | Supply and fix in repair 75 mm bore PVC (SWR) bends of any radius complete all as speified and directed. |
| 50 | Supply and fix in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 51 | Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. |
| 52 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and |
| 53 | Supply and fix in repair looking mirror of size 600mm x 500mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 54 | Supply and fix in repair soap dish, brass chromium plated, fancy type, fixed to plugs with chromium plated fixed with brass screws complete all as specified and directed. |
| 55 | Supply and fix in repair 200mm PTMT corner shelf fixed with chromium plated screws complete all as specified and directed. |
| 56 | Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 57 | Supply and fix in repair 15 mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes complete all as specified and directed. |
| 58 | Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 59 | Supply and fix in repair 15mm bore pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 60 | Supply and fix in repair 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 61 | Material and labour for cutting holes into or through brick wall built in cement mortar of superficial area not exc 150 sqcm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. |
| 62 | Supply and fix in repair 20-25 mm thick solid PVC board exterior grade fixed to frame with leaping with shutters , shelves of cup board or in kitchen cabinate etc. complete all as specified and directed. |
| 63 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed. |
| 64 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 65 | Supply and fix in repair stainless steel 20mm dia curtain rod, fancy type with side and end holders and MS brackets fixed in brick /concrete wall with screws complete all as specified and directed. |
| 66 | Material and labour for 2nd class HW plain fillets, square, rectangular or trangular in section, wrought, chamfered or rounded screwed with nails or beads sectional area exc 13 & n.exc 25 Sqcm. complete all as specified and directed. |
| 67 | Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 68 | Supply and fix in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden bead/ aluminium bead /rubber bead in square exc 0.5 Sqm in each pane complete all as specified and directed.Note:- The cost of scaffolding and necessary form work shall be deemed in item rate. |
| 69 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 70 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 71 | Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 72 | Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 73 | Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 74 | Material and labour for 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required including necessary stainless steel fixing arrangement complete all as specified and directed. |
| 75 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 76 | Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 77 | Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 78 | Suplly and fix in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 79 | Supply and fix 75 mm size stainless steel butt hinges medium weight complete all as specified and as directed. |
| 80 | Supply and fix in repair 75 mm size stainless steel butt hinges medium weight complete all as specified and as directed. |
| 81 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 82 | Suplly and fix in repair 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 83 | Supply and fix 150mm long aluminium handles, cast type, anodized complete all as specified and directed. |
| 84 | Supply and fix in repair 150mm long aluminium handles, cast type, anodized complete all as specified and directed. |
| 85 | Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 86 | Suplly and fix in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 87 | Supply and fix in repair 75 mm brass body mortice lock, vertical type, 2 levers complete all as specified and directed. |
| 88 | Taking down steel rolling shutter of any description and size of opening exc 3 sqm but n exc 6 sqm including all components/parts (except guide channel and bracket plates) from position and greasing, oiling all serviceable parts and refixing in same/exisiting position complete all as specified and directed. |
| 89 | Supply and fix in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 90 | Supply and fix in repair ball bearing for rolling shutters complete all as specified and directed. |
| 91 | Supply and fix in repair solid PVC wall lining consisting of 5 mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 92 | Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 93 | Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm long, fixed in floor complete all as specified and directed. |
| 94 | Supply and fix in repair 100 mm dia stainless steel grating doom with hole fixed with cement complete all as specified and directed. |
| 95 | Material and labour for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 96 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender