Tender For Repair And Maintenance Of Lt Panels, Mccbs Earthing And Allied Works At Chinta, Chnichora And Jaighati At Bhalra Mul Stn Under Age (I) Bhalra (Nit No. 74 Of 2026-27)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Lt Panels, Mccbs Earthing And Allied Works At Chinta, Chnichora And Jaighati At Bhalra Mul Stn Under Age (I) Bhalra (Nit No. 74 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Exc in trenches not exc. 1.5 m wide and not exc. 1.5 in depth and getting out in soft soil for taking up or laying of cable/errecting of pole /stay complete all as specified and directed |
| 2 | Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed |
| 3 | Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed |
| 4 | Supply and laying Sand cushioning for the purpose of floors and laying of cables including watering and consiolidation. |
| 5 | S & L brick covering with width equil to length of brick as the mechanical protction to cable with well burned sub class 'B' laid in trenches flat complete all as specified and directed. |
| 6 | Supply & fix Bus bar Panel, Size:0.8x0.4x0.4 Mtr, Kiosk outdoor type, CPRI approved, LT 440 Volts, 50 Hz , 3 Phase 4 wire supply , floor mounted factory fabricated weather and vermin proof protection class IP 54 made out of 3.15 mm thick MS Sheet CRCA on angle iron 30X30X4mm frame of size suitable to incorporate following accessories with front opening doors, locking arrangement powder coated internally and externally, shall have channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1:3:6 type C-2 , using 40 mm graded crushed stone aggregate as recommended by manufacturer or directed by the Engr -in - charge including earth work complete comprising of Bus bar chamber comprising 4 Nos Aluminium strip bus bars PVC insulated made of aluminium strip of size suitable for 200A current. PVC sheathed with colour coding. |
| 7 | S&F for 1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 6 sqmm stranded conductor, including taking down old unserviceable service connection complete complete all as specified and directed. |
| 8 | S&F for 1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 10 sqmm stranded conductor, including taking down old unserviceable service connection complete complete all as specified and directed. |
| 9 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 10 Sqmm 4 core, complete all as specified and as directed. |
| 10 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 16 Sqmm 4 core, complete all as specified and as directed. |
| 11 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 25 Sqmm 4 core, complete all as specified and as directed. |
| 12 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 35 Sqmm 3.5 core, complete all as specified and as directed. |
| 13 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 50 Sqmm 3.5 core, complete all as specified and as directed. |
| 14 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 70 Sqmm 3.5 core, complete all as specified and as directed. |
| 15 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 120 Sqmm 3.5 core, complete all as specified and as directed. |
| 16 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 150 Sqmm 3.5 core, complete all as specified and as directed. |
| 17 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked cross sectional area 185 Sqmm 3.5 core, complete all as specified and as directed. |
| 18 | Supply and fix cable jointing kit for 1100 volt cable for ndoor/outdoor type joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE armoured AI conductor cable of size 70 to 95 sqmm, indoor/outdoor type all as specified and directed |
| 19 | Supply and fix cable jointing kit for 1100 volt cable for ndoor/outdoor type joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE armoured AI conductor cable of size 120 sqmm, indoor/outdoor type all as specified and directed |
| 20 | M&L MCCB 4 pole , 415 volt, Adjustable type 160 Amps with breaking capacity 36 KA all as specified and directed by Engr-in-Charge |
| 21 | M&L MCCB 4 pole , 415 volt, Adjustable type 200 Amps with breaking capacity 36 KA all as specified and directed by Engr-in-Charge |
| 22 | M&L MCCB 4 pole , 415 volt, Adjustable type 250 Amps with breaking capacity 36 KA all as specified and directed by Engr-in-Charge |
| 23 | Supply and fix ON LOAD change over switch 415 volt in sheet metal enclosures 4 pole of capacity 63 Amps all as specified and directed |
| 24 | Supply and fix ON LOAD change over switch 415 volt in sheet metal enclosures 4 pole of capacity 160 Amps all as specified and directed |
| 25 | Supply and fix ON LOAD change over switch 415 volt in sheet metal enclosures 4 pole of capacity 200 Amps all as specified and directed |
| 26 | Supply and fixing pipe galvanised medium grade 50 mm dia with all fittings etc. laid inany places all as specified and directed |
| 27 | Supply and fixing pipe galvanised medium grade 80 mm dia with all fittings etc. laid inany places all as specified and directed |
| 28 | Supply and fixing aluminium cable lugs (Elecrical connector) for tightness to electrical cable with supporting nuts/bolts complete of followings sizes :- |
| 29 | (a) 25 Sq mm |
| 30 | (ii) 35 Sq mm |
| 31 | (iii) 50 Sq mm |
| 32 | (iv) 70 Sq mm |
| 33 | M&L testing & Commissioning of LT panel frame CPRI approved, outdoor type,factory made fabircated to CRCA sheet of with min 3.15 mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of following parts.Incomer MCCB(a) MCCB 400 Amps FP 36 KA - (adjustable thermal and magnetic release) - 01 NoOutgoing MCCB (b) MCCB 200 Amps FP 36 KA - (adjustable thermal and magnetic release) - 02 No(c) MCCB 160 Amps FP 36 KA - (adjustable thermal and magnetic release) - 01 No (e) MCCB 100 Amps FP 16 KA - (adjustable thermal and magnetic release) - 01 No(f) Aluminium bus bar chamber (4 Strips) 3 phase 415 volts 400 Amps all as required (g) Indication lamps for R, Y, B - 1 Nos (h) Digital voltmeter 0-500 volts with selector switch - 01 Set |
| 34 | (j) Digital ammeter with CT's of suitable ratio & selector switch 0-440 A cap- 01 Set (k) Panel Wiring with suitable size PVC insulated PVC sheathed 1100 volts grade with copper conductor multi-stranded cable with lugs on both ends of cable.(l) Front operated on load change over switch 400 amps.-01 No(m) Lock pedestal - 01 NoMake of Panel : DV Electromatics Private Limited / Simon Fabricators / Electricfield Co / Adhunik Switchgear / Universal Switchgear/ Power ControlMake of MCCB/Change Over : L&T / Legrand / Schneider / Havells/C & S Make of Voltmeter / Ammeter / Multifunction Meter : SECURE / L&T (RISHAB) / C&S ELECTRIC / MECO Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender