Tender For Comprehensive Maintenance To B/R Services In Smq At Akash Vihar In Domestic Area At Af Station Suratgarh
Tender Value
45 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
4 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To B/R Services In Smq At Akash Vihar In Domestic Area At Af Station Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Sep-2026 | Corrigendum_01 | BOQ | 01-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (COMPREHENSIVE MAINTENANCE TO B/R SERVICES IN SMQ AT AKASH VIHAR IN DOMESTIC AREA AT AF STATION SURATGARH) |
| 2 | Demolition of brick masonry built in cement mortar including all quoins, arches and removing from site etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | All as per Ser item No 2 here in before but using old bricks |
| 5 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 7 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 8 | M&L factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 9 | M&L factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 10 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing / back filing of pressed steel door frame including necessary form work all as specified. |
| 11 | S&F factory made 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed. |
| 12 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 13 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified. |
| 14 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 15 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. |
| 16 | All as per srl item No 14 here in before but as in replacement Complete all as specified and directed. |
| 17 | S&F as in replacment Aluminium Handles 150 mm size cut type . Complete all as specified and directed. |
| 18 | S&F Aluminium Handles 150 mm size cut type .Complete all as specified and directed. |
| 19 | S&F as in replacment Aluminium tower bolts 150 mm size cstype .Complete all as specified and directed. |
| 20 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 21 | S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified. |
| 22 | All as per srl item No 19 but fixed as in replacement. |
| 23 | S&F galvanised Steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 24 | All as per srl item No 21 hre in before but fixed as in replacement. |
| 25 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 26 | Supply and fix in replacement factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,butt hinges ,peg set of three etc including two coat of synthetic paint over primer complete all as specified and directed. |
| 27 | S&F fancy type stainless steel 20 mm dia curtain rod thickness of pipe not less than 1.0 mm including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed. |
| 28 | M& L in replacement for 18mm thick solid HDHMR board sunmica leminated sheet of thickness not less than 1 mm on both side of two different colours (colour finish) as in kitchen cabinet shutter, jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel piano hinges suitable for 18/19 mm HDHMR Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. Note: (a) Quoted unit Rates are inclusive of PVC board, hinges, screws and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. |
| 29 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 30 | S& F in replacement factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section 50 x 25 mm. Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of 'Z' section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing wire gauge to gauge window Glass pane, wire gauge work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respectiveii) Design shall be got approved from the Engineer-in-charge |
| 31 | S&F as in replacement floor door stopper of aluminium alloy body tounge, anodised with hard drawn steel spring with overall length of cover plate 140mm long complete all as specified. |
| 32 | S&F as in replacement of 300 mm ,mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified & as directed. |
| 33 | S&F in replacement brass 2 Lever mortice lock, vertical type,size 50 mm complete all as specified . |
| 34 | Supply & fixing powder coated aluminium (minimum thickness of powder coating not less than 50 micron) sliding window three track with frame & two numbers glass shutters using 4 mm thick glass (tinted ) and one number shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm complete window using aluminium powder coated sections including aluminium cleat, PVC track, bearing, handle lock, rubber beading, beading for securing the wire cloth etc complete fittings as approved and directed. Size of aluminium sections for frame and shutters shall be as under :-(A) Three Track Frame :-(a) Bottom frame :- Jindal 2010, Section 20620 or Techno commercial equivalent as approved by GE.(b) Top and vertical frame - Jindal 2010, Section 20621 or Techno commercial equivalent as approved by GE |
| 35 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. |
| 36 | M&L for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching, complete all as specified & directed. |
| 37 | M&L for Plain cement concrete 1:2:4 type B-I (20mm graded stone aggregate) 40 mm thick as flooring finished, complete all as specified and directed by Engineer-in-Charge |
| 38 | M&L for providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade conforming to IS: 15658:2006 with latest amendments with approved colour design & pattern as in footparth, hape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer hrough vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all a specified and directed |
| 39 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 , using 40 mm graded crushed stone aggregate as in floor, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5 m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand). Complete all as specified and directed. |
| 40 | Demolition of stone slabs/ tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removing rubbish from the premises. Complete all as specified and directed. |
| 41 | M&L for 15-18 mm thick Granite stone slab machine cut( table rubbed and polished) in steps ,jambs,pillars,window cills ,cooking platform, laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including polishing complete all as specified. |
| 42 | M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles with & including dismantling of existing tiles of any description ,complete all as specified and directed by the Engineer in Charge. |
| 43 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with complete all as specified and directed by the Engineer in charge. |
| 44 | All as per Srl Item No 42 here in before but as vetical surfaces with and including screed of 10 mm thick in CM 1:4. complete all as specified and directed by the Engineer in charge. |
| 45 | All as per Srl Item No 42 here in before but tiles of size exc 0.18 Sqm but not exc 0.38 Sqm . complete all as specified and directed by the Engineer in charge. |
| 46 | M&L for machine cut polished kota stone slab flooring of size of Kotastone not less than 550 mm x 550 mm and 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 47 | M&L for polished kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed.Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 48 | M&L for rubbenised chequered cement concrete tile 30 cm x30cm x 25 mm thick set jointed and pointed in cement slurry and using pigments laid over and including screed bed 15 mm thick in CM 1:6 as in floors. Complete all as specified and directed. |
| 49 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 50 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 51 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 52 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 53 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 54 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 55 | M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 56 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed. |
| 57 | Applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflage patterns, over new plastered surfaces , including preparation and using primer,complete all as specified and directed. |
| 58 | M&L for complete removal of old existing treatment from wall surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over surfaces , including preparation and using primer,complete all as specified and directed. |
| 59 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 60 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 61 | S&F in replacement vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and lush pipe) including cast iron 'P' or 'S' trap 100 mm bore and necessary lime concrete including making good to floor. Complete all as specified and directed. |
| 62 | S&F in replacement viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed. |
| 63 | S&F in replacement, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 64 | Supply and fixing in replacement, wash hand basin vitreous china flat back 550 x 400 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed. |
| 65 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 66 | All as per srl item No 64 here in before but kitchen sink without drainage board and overall size 495 x 420 mm and bowl size 410 x 330x160mm. complete all as specified. |
| 67 | S&F as in replacement 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated weight not less than 665 gm, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe |
| 68 | S&F in replacement concealed stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy having weight not less than 575 gm, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed. |
| 69 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. |
| 70 | S&F in replacement Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified. |
| 71 | S&F in replacement, 15mm bore, wall mixer, fancy type, chromium plated weight not less than 1 Kg , cast copper alloy, with capstan heads, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 72 | All as per srl item No 70 here in before but WHB/sink mixer complete all as specified and as directed. |
| 73 | S&F in replacement 600mmx450mm bevelled edge mirror of selected quality glass, mounted on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 74 | S&F in replacement Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed. |
| 75 | S&F as in replacement PTMT ball valve 20 mm nominal size weight of ball valve not less than 210 gm high pressure with float and flynut. complete all as specified and as directed. |
| 76 | S&F in replacement PTMT bib tap weight not less than 90 gm any colour high pressure screwed for iron pipes 15 mm bore complete all as specified and as directed. |
| 77 | S&F in replacement brass chromium plated grating 125mm dia with hole , complete all as specified and directed. |
| 78 | S&F in replacement and laying of 16 mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings laid in trenches, to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge. |
| 79 | S&F in replacement and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings laid in trenches, to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge. |
| 80 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 81 | All as per srl item No 79 here in before but tank of capacity 500 Ltr |
| 82 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site. complete all as specified and directed. |
| 83 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, incuding taking down of old rusted/u/s GI pipe removal from site, complete all as specified and directed.complete all as specified and directed |
| 84 | Cleaning and removing all scales and dirt etc from tanks of cap 500 Lt and from mouths of circulating pipe etc for any capacity ltrs capacity of tanks and removing rubbish from the premises as directed by eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning) |
| 85 | S&F in replacement Long Body Bib taps,15 mm cast copper alloy,chromium plated ,fancy type having weight not less than 575 gm ,screwed down , screwed for iron pipe , complete all as specified and directed by the Engineer in Charge. |
| 86 | S&F in replacement bathroom PVC cabinet with best quality mirror, shelves inside, size 450mm x 300mm including required fittings all as directed. |
| 87 | Dismantling for Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 88 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructionscomplete all as specified and directed. |
| 89 | M & L rolled mild steel as in framing for cladding and the like fixed with angle cleats and connecting plates Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge |
| 90 | Dismantling structural steel or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 91 | Supply and fixing as in replacement informatory Sign board of size 600mmx400mm made of ACP Sheet 3 mm thick with stainless steel rectangular frame 25 x 15 mm all around retro reflective high intensity 400 micron thick blue/white colour sheet pasted with heating process on both bsides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter and in proper manner incidating Shed No as directed by Engr in charge .02 Nos 50 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided the board and overall height of 1.0 m (top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300mmx300mmx600mm. complete all as specified and directed. |
| 92 | M & L as in replacement 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified |
| 93 | M & L as in replacement for 3 mm thick frosted sheet glass and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 94 | S& Fixing in replacement 20mm bore gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe including opening the GI pipe and resecuring the GI pipe in the the same location. (no separate measurements for refixing of pipe will be given) |
| 95 | Petty repairs to leakage in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description including changing the washer etc all as specified. |
| 96 | S&F in replacement spindles for 15 mm CP brass bib cock/stop cocks etc size 1 nos to 4 nos for full turn fittings/ half turn complete as directed. |
| 97 | S&F as in replacement PVC door seal of width 50 mm 2mm thick. complete all as specifeied & directed |
| 98 | S& Fixing in replacement small fittings galvanised iron medium grade such as sockets, elbow , nipple (up to size 200 mm), tee , union etc for 15mm bore pipe including opening the connected pipe and refixing in the same location (ISI Mark all as directed) |
| 99 | All as per Srl Item No . 97 above but for 20mm bore pipe |
| 100 | S& Fixing in replacement GI Tank connection Nipple 20/25 mm bore 75mm long. complete all as specifeied & directed |
| 101 | S& Fixing in replacement PVC water storage tank lid cover (Cylindrical) for 500 /1000 ltrs capacity tanks (Make : as per sample) |
| 102 | S&F of cantilever bracket for sink or wash hand basin complete all as specifeied & directed |
| 103 | S& F as in replacement of wooden beads 2nd class hard wood of any size in cup board & glazed or gauged joinery mitres etc all as directed by Engr-in-Charge (As per Sample). |
| 104 | S& fixing as in replacement internal assembly syphonic/non syphonic type for PVC flushing cistern of cap 9/10 Ltr. complete all as specifeied & directed |
| 105 | S&F as in replacement PVC Nahani / floor trap for diameter of pipe 75mm including MS chromium plated grating. |
| 106 | S& F in replacement CP concealed stop Cock fancy type/ angle stop cock screwed both end for iron pipe 15 mm bore. |
| 107 | S&F in replacement spindles for CP brass Wall /WHB/Sink mixer etc full turn fitting /half turns complete as directed . |
| 108 | Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore, cleaning the pipe or fittings etc and refixing the same in position all as specified. |
| 109 | Petty repairs to leakage in by refixing/resecuring in PVC (SWR) pipes/ CI pipes etc all as specified. |
| 110 | Easing of door/windows (Complete for one no of door or window) shutters of any size/any number of pannels for easy closing/opening / tightning of hinges or changing the position of hinges adjustments of lower bolts, Sliding bolts etc complete all as directed. |
| 111 | Welding of purpose made trade pattern box type hinges to steel windows to obtain smooth opening & closing complete including cutting existing hinge all as specified & directed. |
| 112 | S& Fixing in replacement waste fittings of brass chromium plated 32mm /50mm dia for sink/WHB complete all as specified and directed |
| 113 | S & Fixing in replacement mild steel CP peg set of five/Six complete all as directed. |
| 114 | S&F in replacement PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore. complete all as specified and directed |
| 115 | S&F in replacement PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore. complete all as specified and directed |
| 116 | S& F as in replacement PVC (SWR) bend with access door of any radius of 110mm bore. complete all as specified and directed |
| 117 | S& F in replacement PVC (SWR) bend with access door of any radius of 75mm bore. complete all as specified and directed |
| 118 | Repairs and resecuring to cup boards including easing of CB shutters, tightning of hinges or handles/knobs hasp and staple etc complete all as directed. |
| 119 | Welding of butt hinges 100 mm medium weight to chowkhat after taking down shutters and refixing in position the same and making functional complete all as specified. |
| 120 | Welding of Mild steel body single action door spring hinge size 100 mm including taking down door of any size and refixing in same opening. complete all as specified and directed |
| 121 | S&F in repairs Flush pipe of polyethylene of low or high density of 32 mm dia, for low level cistern complete all as directed |
| 122 | S&F in replaceement plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified |
| 123 | S&F in replacement CP pressure JET for EWC including flexible pipe for 15 mmdia complete all as directed. |
| 124 | Securing of glass of any description in existing steel frame with putty including removing of old putty all as specified. |
| 125 | Resecuring of Galvanised mild steel wire cloth in same position any size fixed with tinned tacks, or galvanised wire staples . Please Enable Macros to View BoQ information |
| 126 | Resecuring of Galvanised mild steel wire cloth in same position any size fixed with tinned tacks, or galvanised wire staples . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender