Tender For Repair/ Maintenance Of Joinery, Doors And Window, Plinth Protection, Att, Wall Panelling Including Internal Wiring, Fittings/ Fixtures In Technical Area At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt - 10
Tender Value
25 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Joinery, Doors And Window, Plinth Protection, Att, Wall Panelling Including Internal Wiring, Fittings/ Fixtures In Technical Area At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt - 10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing the debris from site to out site MoD Land complete all as specified and as directed. |
| 2 | M&L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and as directed. |
| 3 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path and paving, finished even and smooth without using extra cement complete all as specified and as directed. |
| 4 | M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finished even and smooth with using extra cement complete all as specified and as directed. |
| 5 | M&L for plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in surface channel/drain complete all as specified and as directed. |
| 6 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 7 | M&L for glossy finish coloured chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set jointed and pointed in neat cement slurry in floor with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 8 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including fillets complete all as specified and as directed. |
| 9 | S&F solid PVC wall lining consisting of 5mm thick supreme prelaminated colour PVC sheet inclusive of solvent cement and fixing at site complete all as specified and as directed. |
| 10 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifications and drawing complete. |
| 11 | M & L for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber accountic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600x600) mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped aglvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24x24) mm of thickness 0.45 of mm c/c universal main runner of T Shape with double rotary siticing of size (38x25) mm of lenght 1200mm made from 0.33GS steel of lenght 3.60 mtr to be spced at 600x 600mm size) c/c cro runner T shape wtih double rotary siticing of size (30x24)mm of length 1200mm made 0.25 thick GS sheet spaced @ 600mm c/c (600mm 600mm) size complete all as specified and directed by Engineer -in- Charge. |
| 12 | Taking down cement plaster on brick, stone or concrete surfaces of walls etc incl racking out joints hacking for key scrubbing down with water etc and removing the debris from site to out site MoD Land complete all as specified and directed by Engr-in-Charge . |
| 13 | M&L for 10mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equilent. |
| 14 | M&L for 15mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on external walls, finished the surface even and fair without using extra cement as on wall as a whole or in patch etc complete all as specified and as directed. |
| 15 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed |
| 16 | M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10 sqm over new surfaces complete all as specified and as directed. |
| 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. |
| 18 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. |
| 19 | Taking down shutters of any description of size n. exc 1 Sqm each complete all as specified and as directed. |
| 20 | Taking down shutters of any description of size exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 21 | Taking down shutters of any description of size exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender