Tender For Repair To Roof Sheet, Wall Cladding, Valley Gutter, Sky Lights, Steel Gates And Allied Works At 126 Ad Regt And 915 Wksp Under Ge Dehu Road
Tender Value
30 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof Sheet, Wall Cladding, Valley Gutter, Sky Lights, Steel Gates And Allied Works At 126 Ad Regt And 915 Wksp Under Ge Dehu Road
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and as directed by Engineer-in-Charge |
| 2 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engineer-in-Charge |
| 3 | Dismantling timber scantling in fillets,rafters,purlins etc. under 40 sqcm in section unframed work complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Demolition of concrete in any description and in any position not otherwise specifically provided for all as specified and as directed by Engineer-in-Charge |
| 7 | Demolition of brick work/stone boulder masonry built in cement mortar in any position complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed by Engineer-in-Charge |
| 9 | M & L for brick work with sub class \\"B\\" brick straight or curved on plan exceeding 6 mtr mean radius and built in cm 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge |
| 11 | M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge |
| 12 | M&L for two coats of oil bound distemper on new plastered surfaces of walls including 1 mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 13 | M&L two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces complete all as specified & directed by Engineer-in-Charge. |
| 14 | S&F 0.63 mm thick corrugated galvanised mild steel sheets with two corrugation side lap fixed with L-type or J-type hooks with washers in roofs and wall etc with grade of zinc coating 275 including repair of roof sheeting work to carried out at any height including necessary scaffolding and safety measures complete all as specified and as directed by Engineer-in-Charge. |
| 15 | All as per item No 14 here in before but laid in curves of any radius as in roof all as specified and as directed by Engineer-in-Charge. |
| 16 | S&F Machine pressed in position valley gutters ( Trapezoidal section) made out of 1.00mm thick plain galvanised iron sheeting with gavanised coating 275gms/sqm including fabrication cut to size bending , denting or turning up angles as requred with plan 150mm laps jointing with brazing soldering as required to make the joints leak proof complete all as specified all as directed. |
| 17 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as per manufactures instructions with all fittings and accessories etc complete all as specified and as directed by Engineer-in-Charge. |
| 18 | All as per item No. 17 above but with plain sheet fix in valley gutter / ridge complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.Make: Gyproc or Equivalent |
| 20 | M & L 40mm thick cement concrete 1:2:4 type B-0 using 12.50mm nominal size graded crushed stone aggregate as in flooring smooth and finish top without using extra cement complete all as specified and direted. |
| 21 | M&L for forming construction joint 30mm deep x10mm wide sealed with sealing compound grade \\"A\\" for flooring complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof wall etc all as specified and as directed by Engineer-in-Charge |
| 23 | S&F framed works as in doors or gates of angles or other section with gusset plates, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing conforming to Fe 410 Gde E-250 comlete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F in repair mild steel 1mm thick plain black sheet in wall claddding steel gates and similar works cut to size holes punched including round headed screws,clout nails or rivets and fixed to steel framming with plain 40mm lap joint with rivets or welded seams including bending or turning up,mitred angles etc complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S & F in repairs bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required : hooks (stay), heavy for large gates, hook and pintle hinges: large hasps and staples; chains; and made sliding bolts; clamps; hols fasts' wall ties; hooks for handing fans; plain angle cleats for securing purlis to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F roof trusses (framed),trussed,purlin,crane gantries,rails and fastening and heavy brackets framing (beam,tee,angles,channel or flat section including distances cleats etc conforming to Fe 410-W(Gde-E-250) complete all as specified and as directed by Engineer-in-Charge by Engr-in-charge. |
| 27 | S&F rolled sections as in main and cross beams,hip and jack rafters;purlins where connected to common rafters and running rails and guide for sliding doors;fixed with angle cleat or other connecting plates conforming to Fe 410 W Gde E-250 quality A complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M &L for MS work as in wind tie for roof including securing bolt or any other work incl cutting, drilling holes and similar works conforming to Fe 290 Gde e-165 etc complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L preparation of old steel surface of any description over 10 cm width or girth and applying one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge |
| 31 | S&F in repair 3 mm thick sheet glass ordinary quality fixed in panes n.exc. 0.50 Sqm each pane and glazing with oil putty complete including Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips |
| 32 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and pointed in cement mortar complete all as specified and as directed. |
| 33 | M&L for 18-20 mm thick Granite (of any type/colour) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed. |
| 34 | M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 35 | Excavating of soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and as directed by Engineer-in-Charge |
| 36 | M&L PCC 1:4:8 Type D2 40 mm aggregate as in foundations, filling and mass concrete |
| 37 | Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 38 | M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed |
| 39 | M & L for cement concrete work (PQC) M-40 design mix in pavement/hardstanding of flexural strength 49kg per sq cm in field using 400 kg of cement per cub mtr of concrete 25cm or less complete all as specified and directed |
| 40 | M & L for Chequered cement concrete tiles of 30 cm x 30cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed. |
| 41 | M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified. |
| 42 | M&L PCC (20 mm graded aggregate)1:3:6 Type C1 Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges |
| 43 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided complete. |
| 44 | M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels,roof beam over 1.5m span complete all as specified and directed. |
| 45 | M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate as in slabs complete all as specified and directed. |
| 46 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 47 | All as per item No 46 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 48 | M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings,platform, and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. |
| 49 | M and L in repair for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge. |
| 50 | M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender