Tender For Repair / Maintenance Of Street Light Fittings, Garden Light And Other Connected Items Of 05 Sect And Its repair renovation Units Under Age (I) Bhalra (Nit No. 71 Of 2026-27)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
16 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Street Light Fittings, Garden Light And Other Connected Items Of 05 Sect And Its repair renovation Units Under Age (I) Bhalra (Nit No. 71 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, taking down/ laying of cables/ pipes or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming soft/ loose soil in layers not exceeding 25 cm complete all as specified and directed. |
| 3 | Removing excavated material (spoil) not exceeding 50m and depositing where directed at a level n. exc. 1.50 m above the starting point complete all as specified and directed. |
| 4 | Material and labour for sand cushion to the full width of trenches for protection of cables including spreading watering and consolidation complete all as specified and as directed. (Note:- Only punned down volume of sand to be measured). |
| 5 | Supply and laying bricks laid in trenches across the trenches as cable protection complete all as specified and as directed. |
| 6 | Supply and laying LT XLPE insulated, armoured electric power cable (heavy duty), aluminium standard conductor, 1100 volts grade3, cross sec area for the following sizes with galvanised steel strip or wire complete including removal of u/s cable all as specified and as directed. Make : Havells/Glostar/Polycab/Nicco (Note:- Excavation, sand coushioning and bricks protections shall be measured and paid separately under relevent items.) |
| 7 | (a) 10 sqmm 4 core |
| 8 | (b) 16 sqmm 4 core |
| 9 | (c) 10 sqmm 2 core |
| 10 | (d) 6 sqmm 2 core |
| 11 | Supply and fix in replacement 50 watt LED street light luminaries including lamp having 100 lumens per watt, IP 66 protection and lens based design for uniform distribution. Make :Havells Street Light 50W 6500 K IP65 LHEXAYP7PN7J050 or equivalent all as specified and directed |
| 12 | M&L for replace the bracket for street light made out of 1.5 Mtr long, 40 mm bore GI tubing, medium grade bent to required angle/ shape with and including necessary clamps, nuts, bolts, & washers of suitable size complete all as specified and directed |
| 13 | Supply & fixing in replacment of LED flood light fitting 100 Watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 Protection with impact and corrision resistance complete with driver and lamp having 100 lumens per watt, Make : Havells cat part LHEXBBP7IN7J100 or equivalent all as specified and directed |
| 14 | Supply & fixing in replacment of garden light fitting Decorative type made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base and suitable to fix on pole up to dia 65 mm complete. Make : Havells cat part LHFXBON1TN6F023 or equivalent all as specified and directed |
| 15 | Supply & fixing PVC junction box of size 250mm x 250 mm x 160 mm with hinged type door and 2 Nos terminal 20 Amps MCB, cat part No GSJB-2520 make- sintex or as equivlnt make here-in- after fixed on pole withnecessry fixing arrengment such as nuts, bolts, washers, clamps, etc completr all as specified and as directed. |
| 16 | Supply and fixing and passing into the pole and connecting PVC unseathed copper cable 2.5 sqmm multi stranded copper conductor including necessary protection work and taking down old one complete as specified and directed. |
| 17 | Supply and fixing in replace MCCB 63 Amps, 3 pole, 415 volts, breaking capacity 16kA including making necessary electric connection complete all as specified and as directed. (Make:- Havells/Legrand/C&S/Standard/HPL |
| 18 | Supply and fixing in replace MCCB 100 Amps, 3 pole, 415 volts, breaking capacity 16kA including making necessary electric connection complete all as specified and as directed. (Make:- Havells/Legrand/C&S/Standard/HPL |
| 19 | Supply and replace sheet metal enclosure DB SPN 240 volts 2 way double door type for fixing MCB complete all as specified and as directed. |
| 20 | Supply and replace sheet metal enclosure DB SPN 240 volts 4 way single door type with 200 amps rated bus bar for fixing MCB complete all as specified and as directed. |
| 21 | S&F in replacement MCB 6-32 Amps SP 'C' series 240 V, 50 Hz, breaking capacity 10 KA suitable for lighting and other domestic loads complete all as specified and directed. Make - ABB/siemens/Legrand/Havells/Scheinder |
| 22 | S&F in replacement MCB 40 Amps SP 'C' series 240 V, 50 Hz, breaking capacity 10 KA suitable for lighting and other domestic loads complete all as specified and directed. Make - ABB/siemens/Legrand/Havells/Scheinder |
| 23 | S&F inreplacement MCB 32 Amps SPN 'C' series240 V, 50 Hz, breaking capacity 10 KA. Make - ABB/siemens/Legrand/Havells/Scheinder |
| 24 | S&F inreplacement MCB 40 -63 Amps SPN 'C' series240 V, 50 Hz, breaking capacity 10 KA. Make - ABB/siemens/Legrand/Havells/Scheinder |
| 25 | S & F in replacement MCB TPN/FP 16 to 32 Amps 415 V 50 Hz, breaking capacity 10 KA 'C' curvecomplete with connection testing and commissioning all as specified and directed. Make - ABB/siemens/Legrand/Havells/Scheinder |
| 26 | M&L for painting of steel tubular pole surface of any description over 10 cm in width or grith by preparation of old painted surface and applying one coat of aluminium paint complete all as specified and directed. |
| 27 | Material and labour pin type insulator, porcelain, vitreous, white, brown or green including one galvanized mild steel spindle, two galvanised iron washers and one galvanized iron nut, 100mm height, 65mm dia for 1100 volts grade complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and labour shackle type insulator, porcelain, vitreous, white, brown or green including one galvanized mild steel spindle, two galvanised iron washers and one galvanized iron nut, 75mm height, 90mm dia for 1100 volts grade complete all as specified and directed by Engineer-in-Charge. |
| 29 | Restringing / Restretching / Tightening of old ACSR conductor of any size and make on HT / LT Poles by disconnecting and removing from insulators including providing necessary binding wire and jumpering after proper stringing all as directed. The unit of measurement is 'SPAN' i.e. distance covered between two poles. |
| 30 | Supply & fixing in replacement aluminium conductor steel reinforced (ACSR) of any size for LT overhead lines on steel tubular poles, stretching without kinks and bends including binding wire suitable cross section (but not less than 16 SWG), complete all as specified & directed. |
| 31 | Pruning/cutting of tree branches of any size beyond 2 mtr from over head lines LT/HT including depositing same to a distance as directed by Engineer-in-Charge, complete all as specified & directed. The unit of measurement is 'SPAN' i.e. distance covered between two poles. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender