Tender For Special Repair To Solar Water Heater And Provn Of Brick Wall At Af Stn Samana Under Ge (Af) Jamnagar No 1.
Tender Value
31.50 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
18 days left
EMD
63000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Solar Water Heater And Provn Of Brick Wall At Af Stn Samana Under Ge (Af) Jamnagar No 1.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing in replacement of non presurized type ETC Solar water heater insulated tank of capacity 100 lpd having inner tank galvanised iron material thickness 2.5mm, 50mm high density PUF insulation and outer cover 0.5mm thick galvanized iron sheet with PP powder coating including air release valve and inlet/outlet point on existing structure and connect to water pipeline including taking down of old rusted/broken tank from structure by disconnecting all pipeline, complete all as specified and directed by Engr-in charge. |
| 2 | Supply and fixing in replacement of non presurized type FPC Solar water heater insulated tank of capacity 100 lpd having inner tank galvanised iron material thickness 2.5mm, 50mm high density PUF insulation and outer cover 0.5mm thick galvanized iron sheet with PP powder coating including air release valve and heating element of 2KW and inlet/outlet point etc., on existing structure and connect to water pipeline including taking down of old rusted/broken tank from structure by disconnecting all pipeline, complete all as specified and directed by Engr-in charge. |
| 3 | Supply and fixing in replacement of non presurized type FPC Solar water heater insulated tank of capacity 200 lpd having inner tank galvanised iron material thickness 2.5mm, 50mm high density PUF insulation and outer cover 0.5mm thick galvanized iron sheet with PP powder coating including air release valve and heating element of 2KW and inlet/outlet point etc., on existing structure and connect to water pipeline including taking down of old rusted/broken tank from structure by disconnecting all pipeline, complete all as specified and directed by Engr-in charge. |
| 4 | Supply and fixing in replacement of non presurized type FPC Solar water heater insulated tank of capacity 500 lpd having inner tank galvanised iron material thickness 2.5mm, 50mm high density PUF insulation and outer cover 0.5mm thick galvanized iron sheet with PP powder coating including air release valve and heating element of 2KW and inlet/outlet point etc., on existing structure and connect to water pipeline including taking down of old rusted/broken tank from structure by disconnecting all pipeline, complete all as specified and directed by Engr-in charge. |
| 5 | Supply and fixing in replacement of evaporative tube collector of size 58x1800mm Solar water heater complete with all its fittings to existing heating tank, complete all as specified and directed by Engr-in charge. |
| 6 | Supply and fixing in replacement of flat plate collector module on existing structure with all its fittings to existing heating tank, complete all as specified and directed by Engr-in charge. |
| 7 | Supply & Fixing in repair hot water supply hose along with its two numbers round clip for connecting water supply from Solar water heater panel to its storage tank, complete all as specified and directed by Engr-in charge. |
| 8 | Supply and fixing in replacement of solar water heater ETC/FPC type structure suitable for capacity upto 500lpd designed to bear the weight of solar collector and water tank made with galvanized steel, manual tilt adjustment, structure thickness atleast 2mm, hot dip galvanized finish, suitable to withstand wind velocity 150km/h, complete all as specified and directed by Engr-in charge.Note:- For measurment purpose structure for one module shall be counted as one unit. |
| 9 | Supply & Fixing in repair 32mm bore CPVC pipess SDR 11 & Plain CPVC SDR 11 random fittings fixed complete to walls, ceilings or in floors etc. with Tee, elbow, reducer, union etc connecting items including taking down old pipe, complete all as specified and directed by Engr-in charge. |
| 10 | Supply & Fixing in repair 25mm bore CPVC pipess SDR 11 & Plain CPVC SDR 11 random fittings fixed complete to walls, ceilings or in floors etc. with Tee , elbow, reducer, union etc connecting items including taking down old pipe, complete all as specified and directed by Engr-in charge. |
| 11 | Supply & Fixing in repair 20mm bore CPVC pipess SDR 11 & Plain CPVC SDR 11 random fittings fixed complete to walls, ceilings or in floors etc. with Tee, elbow, reducer, union etc connecting items including taking down old pipe, complete all as specified and directed by Engr-in charge. |
| 12 | Supply and fixing in repair CPVC size 32mm bore ball valve as per requirement at site complete including taking down unserviceable, complete all as specified and directed by Engr-in charge. |
| 13 | Supply and fixing in repair CPVC size 25mm bore ball valve as per requirement at site complete including taking down unserviceable, complete all as specified and directed by Engr-in charge. |
| 14 | Supply and fixing in repair CPVC size 20mm bore ball valve as per requirement at site complete including taking down unserviceable, complete all as specified and directed by Engr-in charge. |
| 15 | Supply & Fixing in repair NRV (brass) 20mm dia ISI marked including fixing, testing, complete all as specified and directed by Engr-in charge. |
| 16 | Supply and install rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) of cap 300 ltrs hoisted and fixed in position, including taking down old unserviceable water tank, complete all as specified and directed by Engr-in charge. |
| 17 | Supply & Fixing mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc including painting of frame with black enamel paint over a coat of primer, including taking down old unserviceable steel, complete all as specified and directed by Engr-in charge. |
| 18 | Material & Labour for single pole and earth enclosure with three pin and earth plug with socket complete with one single pole MCB 32 amps, including taking down old unserviceable MCB, complete all as specified and directed by Engr-in charge. |
| 19 | Supply & Fixing in repair 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium reod and high density plastic ball screwed for iron pipe, minimum weight 455gm, complete all as specified and directed by Engr-in charge. |
| 20 | Material & Labour for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates as in foundation, sub base filling and mass concrete including necessary formwork etc |
| 21 | Supply and draw submain wiring in replacement of two single core 2.5 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unseathed conductor drawn into PVC casing caping and all necessary fittings including 2.5 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dully complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface, complete all as specified and directed by Engr-in charge. |
| 22 | Supply and fixing in replacement of heating element of capacity 2 KW, 230 V, including with thermosatate and relay suitable for glass tube/Plate collector type solar water heater, complete all as specified and directed by Engr-in charge. |
| 23 | Material & Labour for Reinforced cement concrete nominal mix type B1 (1:2:4) (using 20mm graded aggregate) for ground beam, and lintel, complete all as specified and directed by Engr-in charge. |
| 24 | Material & Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape and required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire n. less than 9mm dia or securing with clips, complete all as specified and directed by Engr-in charge. |
| 25 | Material & Labour for mild steel TMT bars 6 to 8mm dia to length bent to shape and required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire n. less than .9mm dia or securing with clips, complete all as specified and directed by Engr-in charge. |
| 26 | Material & Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, lintel beam and similar work; vertical or to batter, complete all as specified and directed by Engr-in charge. |
| 27 | Material & Labour for Brickwork with sub class B bricks, straight or cureved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and directed by Engr-in charge. |
| 28 | Material & Labour for rendering 10mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:6, complete all as specified and directed by Engr-in charge. |
| 29 | Material & Labour for preparing newly plastered surface and applying one coat of cement primer, one coat of white cement based wall putty, rubbing the surface smooth and applying two coat of oil bound distemper of approved shade and quality, complete all as specified and directed by Engr-in charge. |
| 30 | Material & Labour for Glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450 X 300 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including screed bed / rendering 10mm in Cement Mortar 1:4, complete all as specified and directed by Engr-in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender