Tender For Repairing Of L.T. Line , Pole Painting, Tightening Of Over Head Line Guarding & Repairing Of Led Street Light And Supply/Fixing Of Led Street Light High Mast Pannel Cable & Accessories And Supply/Fixing Of 7.5 H.P Submersible Pump, Starter
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Sep 2026
16 days left
EMD
95000
Bank guarantee accepted
Document Fee
1800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of L.T. Line , Pole Painting, Tightening Of Over Head Line Guarding & Repairing Of Led Street Light And Supply/Fixing Of Led Street Light High Mast Pannel Cable & Accessories And Supply/Fixing Of 7.5 H.P Submersible Pump, Starter Panel, Column Pipe, Wire Rope & Accessories Etc. Works At N.M.Y. Gonda (Fruit & Vegitable).
BOQ
| Sl. No. | Item Description |
| 1 | S/F of 100 mm × 110 mm shackle insulator/100 mm × 80 mm pin insulator (S.I. No. 621) |
| 2 | Supply and fixing of 230 mm × 32 mm × 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. (S.I. No. 622) |
| 3 | Supply and erection of \\"D\\" clamps of 50 mm × 6 mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (S.I. No. 623) |
| 4 | S/E of O/H lines with ACSR conductor `weasel' on poles including binding &jumpering complete in all respects (S.I. No. 627) |
| 5 | Tightening of O/H lines with ACSR conductor `weasel' on poles including binding &jumpering complete in all respects (S.I. No. 627 LR) |
| 6 | S/E of overhead line with G.I. wire on 8 SWG, GI wire on poles including binding complete in all respects (S.I. No. 628) |
| 7 | S/E of hexagonal / cradle type gaurd of G.I. wire no. 8 to 4 SWG including binding etc./ five line spacer between ACSR conductor complete in all respects (S.I. No. 629) |
| 8 | S/E of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects. (S.I. No. 631) |
| 9 | Painting of pole with 2 coats of Aluminum paint over Red Oxide primer complete in all respects. (S.I. No. 634) |
| 10 | S/B of 600 mm × 600 mm × 6 mm GI plate vertically for earthing with its top at least 3 m below ground level with 20 mm dia GI pipe & funnel for watering. One earthing lead of 1 No. 8-10 SWG GI wire in 15 mm dia G.I. pipe up to switch board (from apron to switch board, the cost of GI pipe & GI wire will be extra) 30 Cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per direction of E/I complete in all respect as per drawing For Pole (S.I. No. 702) |
| 11 | S/F of 1 No. 8 SWG GI wire in 15 mm dia GI pipe for earthing laid in ground or in wall duly from concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site. (S.I. No. 721) |
| 12 | S/F of LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per equirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 120 Watt LED Street Light (DSR 8.14.16) |
| 13 | S/F of 63 Amp. 415 V metal clad TPN rewirable type switch fuse unit on angle iron bracket complete in all respect Cat. B (S.I. No. 316 ) |
| 14 | S/f of 100 Amp four pole change over switch on 50mm x 50mm x 6 mm angle iron frame, including the cost of labour, T&P, painting and other material required required for proper completion of work as per direction and satisfaction of E/I (S.I. No. 378 ) |
| 15 | S/F of cubical box dust and vermin proof2/3/4 was distribution box of 16 swg MS sheet of 1.5mm thick with the suitable size of copper busher 3 no.500 amp. Cut out unit as incoming inside locking arrangement handle danger plate etc. I/C two cost of approved quality paint and earthing by two No.7/10 SWG wire which will be taken as loop from existing sub station earthing. The job including all material labour T&P suitable foundation for mounting the bars etc. complete.sanctioned by mandi parishad (Appd. In Mandi) |
| 16 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fitting includind trenching (75 cm deep) and re-filling etc as required. 100 mm dia (S.I. No. DSR 15.13.3) |
| 17 | Supply and laying of G.I. pipe including labour T&P etc complete in all respect.(a) 65 mm dia (Civil DSR 18.12.7) |
| 18 | Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16 sq. mm 4 core (S.I. No. 20c.1.9) |
| 19 | Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 25 sq. mm 3.5 core (S.I. No. 20a.1.10) |
| 20 | (b) 150 sq. mm 3.5 core (S.I. No. 20a.1.16) |
| 21 | (c) 185 sq. mm 3.5 core (S.I. No. 20a.1.17) |
| 22 | Supply and fixing of Copper Cable 4.0 sq. mm. 4 Core. (S.I. No. 289 C) |
| 23 | Supply and fixing of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect 25 A TPN (S.I. No. 807 e ii) |
| 24 | Supply and laying of G.I. pipe including labour T&P etc complete in all respect. (a) 65 mm dia (Civil DSR 18.12.7) |
| 25 | S/F of 63 Amp. 415 V metal clad TPN rewirable type switch fuse unit on angle iron bracket complete in all respect Cat. B (S.I. No. 316 ) |
| 26 | S/I/T/C of Pumping plant including Starter control Panel, Cables with all other material T&P Labour etc. 7.5 HP KSB Submersible Pump set Model No. BPP-302/7+UMAi -150 (S.I. No. UP JAL NIGAM 8.5) |
| 27 | Supply of 80mm (Dia M.S column pipe of class ‘C’ 5.4mm thick both and socketed with Heavy sockets and 3/6 meter length and one and flanged complete with interlocking arrangements. (S.I. No. UP JAL NIGAM 11.4) |
| 28 | Supply and fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED Tube Light fitting including tube on surface complete in all respect. CAT.AAA (S.I. No. 23.07) |
| 29 | S/f of 100 Amp metal clad TPN type switch fuse unit complete with rewirable type fuse on angle iron bracket complete in all respects CAT.B (S.I. No. 328 ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender