Tender For Construction Work Of cement concrete Road And Interlocking Road In Various Ward Of Varanasi District Under Infrastructure Fund (Part-Ii)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
21 days left
EMD
2.54 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of cement concrete Road And Interlocking Road In Various Ward Of Varanasi District Under Infrastructure Fund (Part-Ii)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundatlon In ordihary soil (loamclay or sand) including lift up to 1:5m and lead up to 30m. and including filling watering and ramming of excavated earth Into the space between the building and the sides of foundation trenches or Into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete. |
| 2 | Concrete with 4cm gauge approved stone ballast approved coarse sand and cement-in the proportion of 8:4:1 including-supply of all materials labour and tools and plants etc. required for proper completion for the work. |
| 3 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (W.M.M.) specification including premixing the material with water at OMC for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge of the work. |
| 4 | Providing and laying of Rubber moulded Interlocking concrete block pavement having thickness 80mm including leveling and dressing of surface to required level and slope spreading and moisting 30 m.m thick local sand on bend filling joints with local sand etc. for proper complition of work as per drawing and technical specification clause 1504 Hence For Red Colour - |
| 5 | Providing and laying of Rubber moulded Interlocking concrete block pavement having thickness 80mm including leveling and dressing of surface to required level and slope spreading and moisting 30 m.m thick local sand on bend filling joints with local sand etc. for proper complition of work as per drawing and technical specification clause 1504 Hence For Grey Colour - |
| 6 | Brick work with comon bumt clay (non modular) bricks of class M-150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 Coarse sand) |
| 7 | 12 mm thick plaster with cement mortar consisting of 1part cement and 4 part of approved coarse sand . Minimum thickness not be less than 10 mm including supply of all materials , labour and T & P etc. required for proper completion of work with cement and sand of 1.25 fineness modulus. |
| 8 | Disposal of excavated surplus earth upto 5km distance including loading, unloading, cartage etc complete including all labour and T&P etc. required for proper completion of the work |
| 9 | Construction of K.C. drain with precast of C.C. Blocks size (400x325 mm) laid in flat position (37.5mm in length) & kerb stone (300mm in length)including cost of Base Concrete in 1:6:12 cement sand & S.B. Including cost of all material labour T&P etc,proper complition of work |
| 10 | Painting or varnishing new iron work in small area with one coat (upto one sq.m) of ready mixed priming paint and one coat of approved superior quality ready mix paint of clear synthetic varnish i/c s/o materials labour and T& P etc. required for proper completion of work. Paint to be used should confirm to the ISI No.103 1950 |
| 11 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in SLAB and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour & T and P etc, required for proper completion of the works. strength of the concrete shall not beless than M-20. |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Filling of carted earth for filling low land pocket from 8 km distence including loading unloading & ramming watering proper compaction with 20cm layer not exceeding work executed as per direction of engineer-in-charge. |
| 14 | Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding 1/2 meter (20') in depth and earth work in embankment to be in 20cm (8\\") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5\\") lift and 30m (100') lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m ('100') distance as directed by the E/I.(SOR 2020 SI No. 253) |
| 15 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (AR) |
| 16 | Providing and Laying separation Membrane of impermeable plastic sheeting 125 micron thick as per direction of engineer in charge. (AR) |
| 17 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer in-charge. Cement concrete prepared with batch mixing machine. (DSR 2023 Sr. 16.43.1)(F=0.735*107/107) |
| 18 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.(DSR 2023 Sr. 16.46.1) ( F = 0.735 * 107/107 ) |
| 19 | Disposal of excavated surplus earth upto 5km distance including loading, unloading, cartage etc complete including all labour and T&P etc. required for proper completion of the work ( SOR 2020 Sl. No. 231(a)) |
| 20 | Open existing MH cover & cleaning of site |
| 21 | M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming and also including supply of all material labour T&P etc. Required for proper completion of work. (AR) |
| 22 | Struck Pointing with cement mortor consisting 1 part cement and 2 part of sand of 1.25 FM including supply of all materials labour and t&P etc. required for proper completion of the work. SOR 2020 SI no. 574 |
| 23 | Struck Pointing with cement mortor consisting 1 part cement and 2 part of sand of 1.25 FM including supply of all materials labour and t&P etc. required for proper completion of the work. SOR 2020 SI no. 574 |
| 24 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. SOR SI no. 706 |
| 25 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand. S.I. No. 586+583-582 |
| 26 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand ( S.I. No. 586+583-582+596) |
| 27 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) DSR 2023 (13.44.1) |
| 28 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3, Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. SOR 2020 (PWD 641+642) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender