Tender For Tirupathur District General Fund Block Panchayat - 2026-2027 Additional Work Of Community Hall At Kambukudi In Pung Attunadu Panchayat Panchayat Package No.01
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Sep 2026
10 days left
EMD
17600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tirupathur District General Fund Block Panchayat - 2026-2027 Additional Work Of Community Hall At Kambukudi In Pung Attunadu Panchayat Panchayat Package No.01
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Community Hall @ Kambukudi Village in Pungampattu Nadu Panchayat |
| 2 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 3 | Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 4 | Cement Concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four hard broken stone jelly) using 10 to 12mm gauge hard broken granite stone jelly for Terrace flooring including water proofing Compound, laying, finishing, curing, etc. etc., complete complying with standard specification and as directed by the departmental officers |
| 5 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Supplying and painting the walls with two coats of Oil Distember over one coat of primer as instructed by the department officers including preparation of surface curing |
| 7 | Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 8 | Painting two coats over new iron works using ready mixed enamal paint including cost and conveyance of paint and all albour charghers etc acomplete |
| 9 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD18) |
| 10 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 |
| 11 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 71 |
| 12 | Supply and Fixing of single box type 4 feet 24W LED Fiitting with complete with Electrnic ballast with TW round Blocks on wall or ceilling with conduit pipe suspension with PVC unsheathed copper leads from terminal to the fitting Market Rate |
| 13 | Supply and Fixing of single box type 4 feet 24W LED Fiitting with complete with Electrnic ballast with TW round Blocks on wall or ceilling with conduit pipe suspension with PVC unsheathed copper leads from terminal to the fitting Market Rate |
| 14 | Supply and fixing of CFL BULB including cost of materials and labour charges etc.complete |
| 15 | Supply and fixing of 6Amps 3 pin and 2 pin combined modular type switch conscealed in manufacturer's GI mounting box in flush with wall..SD-134 |
| 16 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83 |
| 17 | Provision Name Board Charge Including All Charges |
| 18 | GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender