Tender For Construction Of Public Distribution System Shop At Kakithakara Street Ward No: 07 In Tiruvarur Municipality.
Tender Value
9.95 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
17 days left
EMD
9950
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvarur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Public Distribution System Shop At Kakithakara Street Ward No: 07 In Tiruvarur Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Labour charges for Removing of Pump set in the deep bore well including connection of submersible cables etc,(up to 5 hp). |
| 2 | 1 HP Single phase submersible motor completed coil rewinding as per standard specification and proper termal connection including all cost of materials and labour charges etc,. Complete. |
| 3 | 1 HP Single phase submersible pump complete replacement of pushes sleves,defuser,impler made to good work condition of pump including all cost of materials and labour charges etc,. Complete. |
| 4 | 1HP Single phase panel board servicing charges replacement of conduct kit and capacitor including all cost of materials and labour charges etc complete. |
| 5 | Labour charges for erection of Pump set in the deep bore well including connection of submersible cables etc,(up to 5 hp). |
| 6 | Repairing of Three phase panel board with two level guard with auto start for 5 HP Three phase submersible pumpset including cost and conveyance of material etc., complete as per standard specification |
| 7 | Labour charges for Removing of Pump set in the deep bore well including connection of submersible cables etc,(5 hp up to 10 hp). |
| 8 | Repairing of Three phase panel board with two level guard with auto start for 7.5HP Three phase submersible pumpset including cost and conveyance of material etc., complete as per standard specification |
| 9 | 10 HP Three phase submersible motor completed coil rewinding as per standard specification and proper termal connection including all cost of materials and labour charges etc,. Complete. |
| 10 | 10 HP Three phase submersible pump complete replacement of pushes sleves,defuser,impler made to good work condition of pump including all cost of materials and labour charges etc,. Complete. |
| 11 | Repairing of Three phase panel board with two level guard with auto start for 10 HP Three phase submersible pumpset including cost and conveyance of material etc., complete as per standard specification |
| 12 | Labour charges for erection of Pump set in the deep bore well including connection of submersible cables etc,(5 hp up to 10 hp). |
| 13 | Labour charges for Removing of Pump set in the deep bore well including connection of submersible cables etc,(10 hp up to 15 hp). |
| 14 | 15 HP Three phase submersible motor completed coil rewinding as per standard specification and proper termal connection including all cost of materials and labour charges etc,. Complete. |
| 15 | 15 HP Three phase submersible pump complete replacement of pushes sleves,defuser,impler made to good work condition of pump including all cost of materials and labour charges etc,. Complete. |
| 16 | Repairing of Three phase panel board with two level guard with auto start for 15 HP Three phase submersible pumpset including cost and conveyance of material etc., complete as per standard specification |
| 17 | Labour charges for erection of Pump set in the deep bore well including connection of submersible cables etc,(10 hp up to 15 hp). |
| 18 | Charges for developing the borewells with air compressor of 300 CFM capacity (minimum 8 Hours)including transportation labour and fuel charges for compressor as directed by the departmental officers and conducting yield test by \\"V\\" notch method etc., complete as per standard specifications. |
| 19 | Supply and delivery and fixing of HDPE tank as per IS12701/1996 including loading ,unloading ,transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc |
| 20 | 1000 Liter |
| 21 | Supply and fixing of PVC and GI pipes and specials including all labour charges complete etc,. |
| 22 | 32mm dia,UPVC Column pipe |
| 23 | 20mm dia.UPVC pipe |
| 24 | 25mm dia.UPVC pipe |
| 25 | 80mm dia.UPVC pipe |
| 26 | 20mm dia UPVC Elbow |
| 27 | 25mm dia UPVC Elbow |
| 28 | 80mm dia UPVC Elbow |
| 29 | 20mm dia UPVC Tee |
| 30 | 25mm dia UPVC Tee |
| 31 | 80mm dia UPVC Tee |
| 32 | 20mm dia UPVC Union |
| 33 | 25mm dia UPVC Union |
| 34 | 25x20 Reducer Elbow |
| 35 | 20x15 Reducer Elbow |
| 36 | 25x20 Reducer Tee |
| 37 | 20x15 Reducer Tee |
| 38 | 20mm dia UPVC Ball Valve |
| 39 | 25mm dia UPVC Ball Valve |
| 40 | 20mm PVC Tap |
| 41 | 2.50 sq.mm Flat copper cable (Twad P.No.116) |
| 42 | 1 HP single phase Starter (Twad P.No.111) |
| 43 | 50 MFT condenser |
| 44 | 80mm GM Gate valve |
| 45 | 80mm GM Non return valve |
| 46 | 65mm GI Flange |
| 47 | 65mm Flange Washer |
| 48 | 11/2 \\"X 1/2\\" Bolt Net |
| 49 | 65mm\\" GI Fork Clamp |
| 50 | 2 pole main switch 16 A |
| 51 | 16 Amps fuse unit |
| 52 | 100 uf condenser |
| 53 | 50 uf capacitor |
| 54 | 15 Amps MCB |
| 55 | 20 A Double Pole |
| 56 | Double Pole 16A MCB |
| 57 | Double Pole 20A MCB |
| 58 | 200/250 uf cabasitor |
| 59 | 20Amps MCB Switch |
| 60 | 3/4\\" Non Pressure Valve |
| 61 | 63 Amps Triple Pole MCB Switch |
| 62 | Supply and fixng of TNEB meter board suitable for 3phase 200A service connection made up of suitable angle iron frame work of size 3feetx2feet using angle iron of size1-1/2\\"x1-1/2\\"x1/4\\" rigidly fixed on wall covered with hylem sheet of size 3feetx2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.200Afuseunits(500V),1No.neutrallink,copper earth flat of size 1\\"x1/4\\" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection completeSD 131 |
| 63 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mmdia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains ( SD - 70) |
| 64 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and cleaning and levelling the site etc.,complete |
| 65 | Cement Concrete 1:4:8 mix (One cement four sand and eight metal) using 40mm ISS HBG metal including cost and conveyance of all materials and labour etc complete as per standard specifications. |
| 66 | Supplying fabricating and placing in position of MS/RTS rods including cutting, bending into shape, tying and placing the grill in position including cost of binding wire including cost and conveyance of all materials and labour etc., complete as per standard specifications |
| 67 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 68 | Brickwork in Cement Mortor 1:5 (One cement five sand) mix using country burnt of standard size 8 3/4\\"x4 1/4\\"x2 1/4\\" including cost and conveyance of all materials and labour etc complete as per standard specifications |
| 69 | Plastering with cement mortar 1:5(One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials from an approved quarry to site and including all labour charges for finishing ,curring etc,complete as per standard specifications |
| 70 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender