Tender For Providing Alternate Borewell With 7.5Hp Motor Alied Works At Magalitheru 30000Ltr Oht In Pilaviduthi Panchayat
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
14000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pudukkottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Alternate Borewell With 7.5Hp Motor Alied Works At Magalitheru 30000Ltr Oht In Pilaviduthi Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Providing Alternate Borewell with 7.5Hp motor alied works at Magalitheru 30000ltr OHT in Pilaviduthi Panchayat |
| 2 | Conducting Geo physical Survey |
| 3 | Drilling of 150 mm dia bore well in sedimentary area any where in Pudukkottai District in the Place Shown by the officers including cost and conveyance including fuel labours and etc complete |
| 4 | 0 to 60m from G.L level(SI No.12 (a)i |
| 5 | 60 to 90m from G.l level |
| 6 | 90 to 120m from G.L level |
| 7 | 120 to 150 m from G.L level |
| 8 | 150 to 180 m from G.L level |
| 9 | 180 to 210 m from G.L level |
| 10 | Supplying and delivery of following pvc casing Pipes(12b) |
| 11 | 200 mm pvc plain casing pipe |
| 12 | 200mm pvc slotted casing pipe |
| 13 | 200 mm pvc threaded end cap |
| 14 | Reaming 150mm dia bore well to 300 mm bore well (12b) |
| 15 | 0 to 60m from G.L level |
| 16 | 60 to 90m from G.l level |
| 17 | 90 to 120m from G.L level |
| 18 | 120 to 150 m from G.L level |
| 19 | 150 to 180 m from G.L level |
| 20 | 180 to 210 m from G.L level |
| 21 | Labur charges for inserting casing pipe(with or without Slots) 150mm in the Drillied holes ,filling with annular Space with pebblis size and quality approved by the Officers 13(a) |
| 22 | Charges for developing the bore well with air compressor of 600 cfm capacity including cost transportation fuel ,labour charges etc and assertaining the yield bore well by V Notch Method and by Officers |
| 23 | Supply and fixing of 7.5HP suitable 3 phase control panel board starter delta with two level guard and auto starter including cost and all charges etc. complete. |
| 24 | Supplying of delivery and erection of 7.50 HP 250 lpm x100m head submersible pump set. |
| 25 | Supplying and delivery of 4.0 sq .m submersible cable for pump set erection |
| 26 | Supplying and delivery of 50 mm UPVC Column pipe(M) for pump set errection |
| 27 | Supply and delivery of Nylone rope etc |
| 28 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc |
| 29 | Earthwork excavation and depositing on bank with initial lead and lift in all clauses of soils such as hard stiff black cotton soil, red carth, muramms and hard gravelly soil as per SS 20B |
| 30 | Supply and delivery of following PVC pipes |
| 31 | Conveyance of the following rigid PVC Pipes, lowering to trenches and laying to proper grade and alignment |
| 32 | Refilling exavated earth soil inculding all cost and conveyance etc. complete. |
| 33 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains . (SD NO 64) |
| 34 | Provision for Bore Production pit as type designe etc complete. |
| 35 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 1 & 52 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender