Tender For Providing Water Supply To Periyathazhi Village From Cwss Filter House At Pothakalnvilai In Sathankulam Block
Tender Value
26.72 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
6 days left
EMD
26720
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Water Supply To Periyathazhi Village From Cwss Filter House At Pothakalnvilai In Sathankulam Block
BOQ
| Sl. No. | Item Description |
| 1 | PROVIDING WATER SUPPLY TO PERIYATHAZHI VILLAGE FROM CWSS FILTER HOUSE AT POTHAKALNVILAI IN SATHANKULAM BLOCK |
| 2 | Supply and delivery of the following sizes of HDPE PIPES - PE 100 AS PER IS 4984/2016 other specifications including transportation to stock yard any where in Tamilnadu etc., complete and as directed by TWAD Board officers |
| 3 | 90 mm HDPE PN- 6 Pipes |
| 4 | Supply and delivery of GI pipes confirming to ISI and as amended from time to time and for delivery at site including loading ,unloading , freight,stacking and transit , insurance charges etc. complete and as directed by TWAD Board officers. |
| 5 | 80 mm GI pipe ( Medium) |
| 6 | Supply and delivery of HDPE specials of conforming to IS specifications at site of work including, loading, transportation, unloading, insurance etc., complete as directed by TWAD Board Officers |
| 7 | 90 mm HDPE 90 degree Bend - 6KSC |
| 8 | Supply and delivery of GI specials of conforming to IS specifications at site of work including, loading, transportation, unloading, insurance etc., complete as directed by TWAD Board Officers |
| 9 | 80 mm GI Bend |
| 10 | Supply and delivery of following sizes of CI D/F Sluice Valves for nominal pressure, Air Valves, Non return Valve, Butterfly valve and Gate valve suitable for operating with CI handle and key rod etc., specials, Surface box and other jointing materials inclusive of transportation charges anywhere in Tamilnadu and as directed by TWAD Board officers.(As per Annexure) |
| 11 | 80 mm CI Sluice Valve in 90 mm HDPE main |
| 12 | 80mm DI D/F Gate Valve for Scour in 90 mm HDPE main |
| 13 | 15 mm CI Single Air Valve in 90 mm HDPE main |
| 14 | CIVIL WORK |
| 15 | Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2m in narrow trenches for laying of following sizes of pipes for water supply Standard trench width of in hard stiff clay, stiff black cotton, hard red earth, shales, murrams gravel, stoney earth and earth mixed with small sized boulders and hard gravelly soil etc., complete and as directed by TWAD Board officers. |
| 16 | 90 mm HDPE PN- 6 Pipes |
| 17 | Refilling with excavated soil (other than sand)complying with standard specification inlayers of 15cm watered well rammed and consolidated after the pipes and specials arelaid,jointed and tested etc. and removing and depositing the surplus earth at the places as directed by TWAD Board Officers |
| 18 | 90 mm HDPE PN- 6 Pipes |
| 19 | Lowering of HDPE PN6 pipes and specials into trench and laying to proper grade and alignment and as directed by TWAD Board officers. |
| 20 | 90 mm HDPE PN- 6 Pipes |
| 21 | Lowering of GI pipes and specials into trench and laying to proper grade and alignment ,Jointing with GI Specials and as directed by TWAD Board officers. |
| 22 | 80 mm GI pipe ( Medium) |
| 23 | Jointing HDPE Pipes and Specials by butt fusion welding/ electro fusion welding joints using fusion equipment as per ISO 21307- 2011 and as per IS 7634 (Part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by TWAD Board officers. |
| 24 | 90 mm HDPE PN- 6 Pipes |
| 25 | Cutting of HDPE Pipes true to axis and filing smoothly and finishing the ends etc., complete and as directed by TWAD Board officers. |
| 26 | 90 mm HDPE PN- 6 Pipes |
| 27 | Construction of following masonry valvepit as per TWAD type design for the following Sluice valve including earth work excavation for foundation, PCC 1:4:8 using 40 mm HBG metal for levelling course, Brick work in CM 1: 5 for side wall, plastering with C M 1: 3, 12 mm thick, RCC 1: 1.5:3 using 20 mm HBG stone jelly for precast cover slab, providing PCC Stone in CC 1: 3:6 using 20 mm HBGS including supplying, fabricating, placing RTS grills including charges for fixing surface box, refilling the sides of the pit etc., complete and as directed by TWAD Board officers. |
| 28 | 50 mm CI Sluice Valve in 90 mm HDPE main |
| 29 | 50 mm CI Scour Valve in 90 mm HDPE main |
| 30 | 15 mm CI Single Air Valve in 90 mm HDPE main |
| 31 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steelshaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessarycable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. |
| 32 | The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation |
| 33 | 180 lpm x 50 m - 5 hp at HW |
| 34 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard andlaying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 35 | 180 lpm x 50 m - 5 hp at HW |
| 36 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 37 | For 5 HP Starter - 2 Nos |
| 38 | Pumpset pipe connection -80mm GI |
| 39 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender