Tender For Construction Of Forest Check Post, Chenani, Range Dudu, Division Udh Ur Under Ut Capex 2026-27
Tender Value
20 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
1 days left
EMD
40000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Forest Check Post, Chenani, Range Dudu, Division Udh Ur Under Ut Capex 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1 m aboveground level and removal of rubbish upto a distance of 50 m outside theperiphery of the area cleared |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator)over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 onplan) including disposal of excavated earth lead upto 50 meters and lift upto1.5 m, as directed byEngineer-in-Charge All Kind of Soil (70%) |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator)over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 onplan) including disposal of excavated earth lead upto 50 meters and lift upto1.5 m, as directed byEngineer-in-Charge Ordinary Rocks (30%) |
| 4 | Earth work in excavation by manual means over areas (Exceeding 30 em andupto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) includingdisposal of excavated earth upto 1 mtr from cutting edge, disposed earth to belevelled and neatly dressed in : All kinds of Soil |
| 5 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level: 1:5:10 (1Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level: 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete1:2:4 (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size |
| 8 | Brick work with common burnt clay F.P.S.(non-modualar) bricks ofclass designation 75 in super structure Cement mortar 1:6 ( 1 cement : 6 finesand) |
| 9 | Extra for brick work with common burnt clay bricks/cement concretebricks in superstructure above plinth level upto floor five level Qty vide itemno:-5 |
| 10 | Half brick masonry with bricks of class designation 75 in foundations andplinth in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 11 | Providing and laying in position specified grade of reinforced cement concreteincluding curing but excluding the cost of centering, shuttering, finishing andreinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in walls (any thickness) including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts upto floor five level including curing butexcluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs havingslope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plainwindow sills, staircases and spiral stair cases upto five level including curingbut excluding the cost of centring, shuttering,finishing and reinforcementwith1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mmnominal size) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing inposition and binding all complete above plinth level ThermoMechanically Treated bars of grade Fe-500D or more |
| 15 | Centering and shuttering including strutting, propping etc. and removal ofform for:Foundations, footings, bases of columns etc. for mass concrete |
| 16 | Centering and shuttering including strutting, propping etc. and removal ofform for: Suspended floors, roofs, landings, balconies and access platforms. |
| 17 | Centring and shuttermg including strutting, propping etc. and removal of formfor Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Centring and shuttermg including strutting, propping etc. and removal of formfor Columns, pillars, piers, abutments, posts and struts. Columns |
| 19 | Edges of slabs and breaks in floors and walls. Under 20cms wide |
| 20 | Providingandlayinginpositioncementconcreteofspecifiedgradeexcludingthe costofcenteringandshuttering-Allworkuptoplinthlevel:1:3:6(1Cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 21 | 15mm Cement plaster mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 22 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 23 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorptionless than 0.08% and conforming to IS:15622 of approved make, in all coloursand shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarsesand) including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS :15622(thickness to be specified by the manufacturer), of approved make, inall colours, shades except burgundy, bottle green, black of any size asapproved by Engineer- in-Charge, in skirting, risers of steps and dados over12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointingwith grey cement slurry @ 3.3 kg per sqm, including pointing in white cementmixed with pigment of matching shade complete |
| 25 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 1 mm thick, vide item no.(17,18,19) -21 |
| 26 | Applying one coat of water thinable primer on walls vide item no.(17,18,19)-21 |
| 27 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) over andincluding priming coat with water thinnable cement primer (17,18) -21 |
| 28 | Finishing walls with acrylic smooth exterior paint of required shade on Newwork (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade.Two or more coats on new work |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade.Two or more coats on new work Qty vide item no:-23 |
| 31 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position. With hold fast lugs orwith dash fasteners of required dia & length ( hold fast lugs or with dashfasteners shall be paid for separately) |
| 32 | Providing and fixing panelled or panelled and glazed shutters for doors ,windows, and clerestory including ISI marked black enamelled M.S. Butthinges with necessary screws excluding penelling which will be paid forseparately, all complete as per direction of engineer-in -charge |
| 33 | Providing and fixing 30 mm thick wire gauze shutters using galvanised M.Swire gauze of average width for aperture 1.4 mm in both direction with wireof dia. 0.63mm for doors, windows with necessary secrews ISI marked M.Spressed bright finished butt hinges with necessary screws of requiredsize.second class deodar wood |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangementand making necessary holes for inlet, outlet and overflow pipes but withoutfittings and the base support for tank |
| 35 | Providing and fixing gang saw cut, mirror polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, windowsills, facias and similar locations, of required size, approved shade, colourand texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarsesand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels8.2.1 Raj Nagar plain white marble/Udaipur green marble/zebra black marble.Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm |
| 36 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works |
| 37 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slopeconsolidated and plastered with 25 mm thick mud mortar mixed with bhusa at35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung)and covered with specified tile bricks grouted with cement mortar 1:3 (1cement: 3 fine sand) mixed with 2% of integral water proofing compound byweight of cement and finishing neat. With common burnt clay (non modular)brick tiles of classdesignation 10.0 qty vide item no.18 |
| 38 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 10 mm and down gauge), including finishing with cementmortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deepchase. |
| 39 | Providing and fixing of 3mm bituminus waterproofing for terrace. Includingcleaning of surface complete job |
| 40 | Making plinth protection with common burnt clay bricks of class designation7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mmthick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed ofdry brick aggregate 40mm nominal size rammed, consolidated and groutedwith fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3fine sand) and curing complete |
| 41 | PlumbingProviding and fixing on wall face un-plasticized Rigid PVC rain water pipesconforming to IS: 13592 Type A including jointing with seal ring conformingto IS: 5382 leaving 10 mm gap for thermal expansion 110 mm diametre |
| 42 | Providing and fixing white vitreous china pedestal type water closet(Europeantype W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushingcistern, including flush pipe with manually controlled device (handle lever),conforming to IS:7231, with all fittings andfixtures complete, includingcutting and making good the walls and floors wherever required: W.C. panwith ISI marked white solid plastic seat and lid. |
| 43 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm highand 112 mm distance from wall of standard shape with brackets of the samematerials with snap fittings of approved quality and colour, weighing not lessthan 105 gms |
| 44 | Providing and fixing C P jali |
| 45 | Providing and fixing Waste pipe for wash basin |
| 46 | Providing and fixing uplasticized PVC connection pipe with brass unions 30cm length 15 mm nominal bore |
| 47 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasinmixer and geyser points of approved make conforming to IS : 8931 |
| 48 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillartaps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever requiredWhite Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P |
| 49 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metrelong with S.S. triangular plate to European type W.C. of quality and make asapproved by Engineer - in - charge |
| 50 | Mirror of superior make glass 60x45 cm |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot and cold water supply, including all CPVC plain andbrass threaded fittings. This includes jointing of pipes and fittings with onestep CPVC solvent cement and testing of joints complete as per direction ofEngineer-in-charge.20mm nominal outer dia pipesInternal work Concealedfixing the pipe with clamps at 1.00 meter spacing including cutting chases andmaking good the wall etc. |
| 52 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S.13983 with C.I. brackets and stainless steel plug 40 mm, including painting offittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board610x510mm bowl depth 200mm |
| 53 | Providing and fixing 600x120x5mm glass shelf with edges round offsupported on anodized aluminum angle frame with C.P. brass brackets andguard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 54 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fitting arrangement ofapproved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide andeffective height of 88 mm, weighing not less than 170 gms |
| 55 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:25 mm dia. nominal bore |
| 56 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock ofapproved quality conforming to IS standards and weighing not less than 810gms |
| 57 | Hard wareProviding & fixing ISI market oxidised M.S tower bolts black finished (Barreltype) with necessary screws etc. complete. 150 x 10 mm |
| 58 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992with necessary screws etc. complete |
| 59 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992with necessary screws etc. complete.125 mm |
| 60 | Providing &fixing ISI merked oxidised M. S handles conforming to IS : 4992with necessary screws etc. complete.100 mm |
| 61 | Twin rubber stopper |
| 62 | 150 mm hooks & eyes |
| 63 | ElectricalWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulatedcopper conductor single core cable etc. as required. |
| 64 | Providing and fixing Service Line(Aluminium 25 sq m) |
| 65 | Iron D Box of standrad make , 6 way. |
| 66 | Iron D Box of standrad make , 6 way. |
| 67 | MCB 6-40 Amp |
| 68 | 5 Pin Sockets points including switch |
| 69 | Provision of Heating point |
| 70 | ICFL saver 18 watt of approved quality |
| 71 | Providing, Installation,testing and commissioning of Gyser of 25 lt . Size ofBajaj, Orient, Khaitan,Usha or Polar brand and manufacturers.including all fittinegs |
| 72 | Providing,Installation,testing and commissioning of cieling fan of 56\\" sizeSize of Bajaj, Orient, |
| 73 | Providing,Installation,testing and commissioning of Exhaust 450 mm dia. Sizeof Bajaj, Orient, |
| 74 | Carriage of Sand av.20 KM |
| 75 | Carriage of Bajri av. 20 KM |
| 76 | Carriage of Brick av 30 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender