Tender For Upgradation Of Dfo Office Bandipora In Bandipora Forest Division Under Scheme Ut-Capex For The Year 2026-27
Tender Value
10.08 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
20158
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Dfo Office Bandipora In Bandipora Forest Division Under Scheme Ut-Capex For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Demolishion of brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 2 | Brick work in plain arches in superstructure above plinth level and upto floor V level including centering, shuttering and curing complete for span upto 6 meters with common burnt clay (non-modular) bricks of class designation 7.5 in cement mortar 1:3 ( 1 cement : 3 coarse sand ) |
| 3 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 4 | Providing and fixing plywood made of commercial quality ISI marked plywood of 12 mm thick, conforming to IS:303, termite and borer resistant, boiling water-resistant (BWR grade), waterproof with smooth both-side finish. The plywood shall be cut, dressed, jointed, and fixed in proper alignment over the supporting framework as per approved design and directions of the Engineer-in-charge, complete in all respects |
| 5 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 6 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 7 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30 mm KD wood or equivalent. |
| 8 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 9 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 10 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 11 | Engagement of Carpenter for Repair of Windows, doors (Excluding Cost of Wood): Providing services of a skilled carpenter for repair and maintenance of existing windows, doors including fitting, fixing, adjustment, and replacement of damaged parts as required, complete in all respects, |
| 12 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 75x47x1.70 mm |
| 13 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm |
| 15 | Providing and fixing PVC wall panelling with a thickness ranging from 7 mm to 9 mm, available in multicolor. The panelling shall be of an imported brand, featuring a core filling with beading for added strength and aesthetic appeal. The PVC panels shall have a fire rating of FR, making them fire-resistant, and shall be fully waterproof, suitable for both interior and exterior applications. The panels shall be UV-resistant, preventing color fading and degradation over time, and shall have high impact resistance to withstand daily wear and tear. The installation shall include all necessary accessories, such as trims, screws, and adhesive, ensuring a secure and seamless finish. The rate shall include complete installation, including cutting, fixing, and carriage up to the site of work, ensuring a high-quality and durable finish. |
| 16 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 17 | Providing and applying touch-up wood polish on existing wooden surfaces, including sanding, filling minor cracks/imperfections, and applying 1–2 coats of approved synthetic enamel or wood polish, complete in all respects as directed by the Engineer-in-Charge. |
| 18 | Providing and fixing first-class marine grade plywood with a thickness of 19 mm for internal and external wall lining work. The plywood shall have a density of 811 kg/m³ (observed value) and shall be ISI marked to ensure quality. It shall include a 20-year replacement warranty and shall have a moisture content ranging from 5-15% (criteria) with an observed value of 9.2%. The plywood shall be water-resistant, with a perpendicular to grain strength of 34.5 N/mm² (observed value), exceeding the minimum criteria of 25 N/mm². It shall also have a glue adhesion in the dry state of at least 1350 and resistance to water with an observed value of 1233, surpassing the minimum required 1000. The parallel to grain strength shall be a minimum of 40, and the plywood type shall meet the criteria with observed values for various properties, ensuring durability and performance. The rate shall include nails or required gluing work and carriage up to the site of work |
| 19 | Providing and fixing premium quality natural Teak veneer (minimum 0.6 mm thick) over plywood surfaces, including preparation of surface, application of approved adhesive (Fevicol SH or equivalent), edge lipping, necessary pressing, sanding, polishing/melamine finish, and all required materials, tools, labour, fittings, and accessories complete to achieve a smooth and uniform finished surface as approved by the Engineer-in-Charge. |
| 20 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.12 mm thick Fire retardant plywood conforming to IS: 5509 |
| 21 | Providing and fixing bright finished brass handles with screws etc. complete : 100 mm |
| 22 | Providing and fixing pvc edge beading for side edges of cubboard shutter for finish surface with a width of 20 to 40mm of roll having a length of 80m with having a single sided finish including glue for fixing as per engineer in charge. Complete |
| 23 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type) |
| 24 | Providing and fixing 65 mm brass cupboard lock, 6-lever type, of approved make and quality, complete with matching brass/steel keys (minimum 2 Nos.), screws, strike plate, escutcheon, and all necessary fittings and fixtures. The lock shall be fixed to wooden cupboard shutters, cabinets, wardrobes, or similar joinery work, including cutting, recessing, drilling,alignment, testing and making good the surface, complete as per manufacturer's specifications and directions of the Engineer-in-Charge. |
| 25 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 26 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets. 25 mm dia ( heavy type) |
| 27 | Providing and fixing wooden panelling 12mm thick over frammingwork of required pattern and design water proof strips of ply boardimported wood panelling for ceiling/walling(imported wood/RAITwood) incl ply wood framing. |
| 28 | Carefull Dismantling wooden boardings/Panelling/Plywood in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead Thickness above 10 mm upto 25 mm |
| 29 | Engagement of First Class Carpenter for refixing existing wooden wall panelling, alignment, cutting, refixing with necessary screws, nails, adhesives, minor adjustments, finishing, labour, tools and tackles, and all incidental charges, complete in all respects as directed by the Engineer-in-Charge. |
| 30 | Providing and fixing approved quality premium vinyl/PVC washable wallpaper of approved shade, texture and pattern, having minimum 300 GSM thickness with paper/non-woven backing, moisture resistant, anti-fungal, stain resistant and scrubbable finish, fixed over properly prepared smooth wall surface using recommended adhesive, including surface preparation, cutting, matching of patterns, edge finishing, necessary tools, scaffolding, wastage and complete in all respects as per approved design and direction of Engineer In-charge. |
| 31 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
| 32 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including conduit as required. 32mm |
| 33 | Supplying and drawings following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/pvc conduit as required2x1.5 sq.mm |
| 34 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil |
| 35 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. |
| 36 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 37 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 39 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\") as specified.(Light Blue) |
| 40 | Supplying and drawings following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/pvc conduit as required2x4 sq.mm |
| 41 | Supply and fix LED Bulb 18W,230V Energy Efficient lamp Make : PHILLIPS, SURYA, SYSKA |
| 42 | Supply and installation of 450 mm, 900 RPM, single-phase heavy-duty exhaust fan of metallic body, including wiring, mounting frame, and testing. Make: Crompton / Havells / Equivalent |
| 43 | \\"Providing, fixing, testing and commissioning of modular electrical accessories including 6A 3-pin sockets, 15A power sockets, 6A/16A switches, GI/MS concealed boxes, cover plates, wiring connections and all incidental works complete in all respects.make Anchor, Goldmedal, Havells, Legrand, Schneider, etc. |
| 44 | Plates |
| 45 | 6A 3Pin |
| 46 | 15A Socket |
| 47 | 6A Switch |
| 48 | 16A Switches Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender