Tender For Pconstruction Of Table Top And Other Allied Works At Fakir Bagan More On R Urhat - Parulia Road, Chandpara Primary School On Hasan-Kamra Road & Near Circuit House On R Urhat Dumka Road Under Birbhum Division, Pwd In The District Of Birbhum
Tender Value
11.99 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
11 days left
EMD
23982
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birbhum → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Pconstruction Of Table Top And Other Allied Works At Fakir Bagan More On R Urhat - Parulia Road, Chandpara Primary School On Hasan-Kamra Road & Near Circuit House On R Urhat Dumka Road Under Birbhum Division, Pwd In The District Of Birbhum, During The Year 2026 - 27.
BOQ
| Sl. No. | Item Description |
| 1 | Bituminous MacadamProviding and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).For Grading II (40 mm nominal maximum aggregate size) LayerThickness 80-100mm. Fakir Bagan on Rampurhat-Parulia Road |
| 2 | Chandpara on Hasan Kamra Road |
| 3 | Circuit House on Rampurhat Dumka Road |
| 4 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg- 0.3kg /sqm.Fakir Bagan on Rampurhat-Parulia Road |
| 5 | Chandpara on Hasan Kamra Road |
| 6 | Circuit House on Rampurhat Dumka Road |
| 7 | Open - Graded Premix SurfacingProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).Fakir Bagan on Rampurhat-Parulia Road |
| 8 | Chandpara on Hasan Kamra Road |
| 9 | Circuit House on Rampurhat Dumka Road |
| 10 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)Case - II : Type BProviding and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. Fakir Bagan on Rampurhat-Parulia Road |
| 11 | Chandpara on Hasan Kamra Road |
| 12 | Circuit House on Rampurhat Dumka Road |
| 13 | Supplying & fixing of Raised Pavement Markers/Road Studs/Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and compling to Specifications of Category A of MoR&TH Circular No. RW/NH/33023/10-97 - DO III Dt. 11.06.1997 & MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sqcm on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer's recommendation including site clearence etc and complete as directed by the Engineer in Charge. The contractor will have to provide a test certificate from a reputable national/international laboratory comforming the above specifications |
| 14 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes |
| 15 | Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801).Fakir bagan (rampurhat Parulia road)60 cm equilateral triangle |
| 16 | 60 cm circular |
| 17 | 80 cm x 60 cm rectangular |
| 18 | 60 cm x 60 cm square |
| 19 | 60 cm equilateral triangle Chandpara on Hasan Kamra Road |
| 20 | 60 cm circular |
| 21 | 80 cm x 60 cm rectangular |
| 22 | 60 cm x 60 cm square |
| 23 | 60 cm equilateral triangleCircuit House on Rampurhat - Dumka Road |
| 24 | iii) 60 cm circular |
| 25 | iv) 80 cm x 60 cm rectangular |
| 26 | v) 60 cm x 45 cm rectangular |
| 27 | Add GST 18% over the Sub-Total upto item No. 7.11 Please Enable Macros to View BoQ information Compatibility Report for V3_BOQ_Percentage_Template.xls Run on 5/11/2015 12:49 The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when you save this workbook in an earlier file format. Significant loss of functionality # of occurrences Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear clipped. 3.0 'BoQ1'!A1:II34 Minor loss of fidelity Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned. 5Defined Names Some cells or styles in this workbook contain formatting that is not supported by the selected file format. These formats will be converted to the closest format available. 15.0 |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender