Tender For Construction Of Reinforced Cement Concrete Fencing With Chain Link Mesh, Gi Barbed Wire And Ms Double Leaf Gate Around Office Land Of Ranipool Under Sikkim Investigation Division, Central Water Commission, Gangtok, Sikkim
Tender Overview
Project Description
Tender for Construction Of Reinforced Cement Concrete Fencing With Chain Link Mesh, Gi Barbed Wire And Ms Double Leaf Gate Around Office Land Of Ranipool Under Sikkim Investigation Division, Central Water Commission, Gangtok, Sikkim
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 3 | Earth Work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains including dressing of soil & ramming of bottom, lift up to 1.5 m including getting out excavated soil & disposal of surplus excavated soil as directed within a lead of 50 m in all kinds of soil for Excavation for post foundation (specing 2.5m c/c) |
| 4 | Centering and Shuttering including strutting, propping, etc and removal of form work for Foundation for post foundation (specing 2.5m c/c) |
| 5 | Centering and Shuttering including strutting, propping, etc and removal of form work for post for RCC fancing post |
| 6 | Providing & laying in position cement concrete of specified grade excluding the cost of specified grade excluding the cost of centering & shuttering-All work up till plinth level 1:2:4 (1cement: 2 Coarse sand :4 graded stone aggregate 20mm size) for RCC fancing post |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) for RCC foundation block |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) for RCC fancing post |
| 9 | Steel reinforcement for R.C.C. work including straightening ,cutting ,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars for RCC foundation block |
| 10 | Steel reinforcement for R.C.C. work including straightening ,cutting ,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars for RCC fancing post |
| 11 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.16.70.1 Made of G.I. wire of dia 4 mm for fancing (Height of fencing = 1.80 m.) |
| 12 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.16.70.1 Made of G.I. wire of dia 4 mm for GI chain-link fabric fixed to the gate frame |
| 13 | Providing and fixing GI barbed wire fencing consisting of 6 horizontal rows of approved quality 12 × 12 gauge (or as specified) barbed wire, stretched and fixed to RCC posts with GI staples, clips and binding wire, including tensioning, cutting, jointing and all incidental works complete.16.18.1 With G.I. barbed wire |
| 14 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.MS angle corner struts (65 × 65 × 6 mm) fixed diagonally between RCC fence posts and foundations at four corners (2 struts at each corner) including cutting, drilling, welding and fixing complete. |
| 15 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.MS angle gate struts (65 × 65 × 6 mm) for gate support, including fabrication, welding, drilling, bolts, nuts and fixing complete. |
| 16 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksProviding, fabricating and fixing MS Double Leaf Gate (4.00 m × 2.10 m) |
| 17 | 15 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand ) including finishing complete on external wall for RCC fancing post |
| 18 | Painting with synthetic enmalled of approved brand and manufacture of required colored to give an even shade. Two or more coat on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture .Approved brand: Asian/ Berger/ Nerolac(White Color) for RCC fancing post |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work for MS Double Leaf Gate (4.00 m × 2.10 m) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work for G.I chain link mesh Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender