Tender For Restoration Of Rain Damages To Lwss Suka Kun & Its Adjoining Villages In Gp Nichla Lot, Baggi, Sehli, Kasan In Tehsil Kotli Distt. Mandi (Hp)(Sh:- Rewinding Of Motor 110.00 & 50.00 Hp And Its Allied Accessories , Repair & Overhauling Of Ce
Tender Value
4.52 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
9100
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Suka Kun & Its Adjoining Villages In Gp Nichla Lot, Baggi, Sehli, Kasan In Tehsil Kotli Distt. Mandi (Hp)(Sh:- Rewinding Of Motor 110.00 & 50.00 Hp And Its Allied Accessories , Repair & Overhauling Of Centrifugal Pump 50.00 Hp 16 Stages And Its Allied Accessories And Repair & Overhauling Of Submersible Pump 10.00 Hp 10 Stages Ksb Make 1St Stage ).
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding of Motor 110.00 HP :- 1 No.-Rewinding of Motor 110.00 HP with copper 1 insulated wire complete by providing packing paper sleeves, cotton tape roll including insulated with air dried varnish including dismentalling and carraige of motor from site of work to workshop and than back to site of work and Re-fixing and testing of motor complete in all respect as per the direction and to the entire satisfaction of the Engineer in - Charge in all leads and lifts. |
| 2 | Rewinding of Motor 50.00 HP :- 3 Nos.- Rewinding of Motor 50.00 HP with copper insulated wire complete by providing packing paper sleeves, cotton tape roll including insulated with air dried varnish including dismentalling and carraige of motor from site of work to workshop and than back to site of work and Re-fixing and testing of motor complete in all respect as per the direction and to the entire satisfaction of the Engineer in Charge in all leads and lifts. |
| 3 | Rewinding of Motor 3.00 HP :- 1 No-.Rewinding of Motor 3.00 HP with copper insulated wire complete by providing packing paper sleeves, cotton tape roll including insulated with air dried varnish including dismentalling and carraige of motor from site of work to workshop and than back to site of work and Re-fixing and testing of motor complete in all respect as per the direction and to the entire satisfaction of the Engineer in Charge in all leads and lifts. |
| 4 | Repair of Pump 50.00 HP :- 1 No.-Removal of Pump from Foundation and manual Shifting to workshop for repair including loading and unloading and manual carriage at both sides and shifting back to site alignment with Motor and trial run as per the direction and to the entire satisfaction of the Engineer - in - Charge in all leads and lifts. |
| 5 | Dismentling of complete Pump after heating Gas. |
| 6 | Providing and Fixing of Impeller complete in all respect. |
| 7 | Repair of Impeller complete in all respect. |
| 8 | Providing and Fixing Shaft complete in all respect. |
| 9 | Providing and Fixing Stage Bowl complete in all respect. |
| 10 | Providing and Fixing Gland Sleeve complete in all respect. |
| 11 | Providing and Fixing of \\"O\\" Rings of all the stages complete in all respect. |
| 12 | Providing and Fixing of Neck Rings complete in all respect. |
| 13 | Providing and Fixing of Lubricant complete in all respect. |
| 14 | Repair of Bearing Bracket complete in all respect. |
| 15 | Providing and Fixing Balancing Disc Assembly complete in all respect. |
| 16 | Providing and Fixing of Guide Bush complete in all respect. |
| 17 | Providing and Fixing of Defuser complete in all respect. |
| 18 | Shifting of Pump from workshop including manual carriage from road head to Pump House complete in all respect. |
| 19 | Pump Jointing to Motor, testing and trial run complete in all respect. |
| 20 | Providing and Fixing of Coupling Set RB 162/2 (Pin Bush type) complete in all respect. |
| 21 | Repair of Pump 10.00 HP = 2 Nos(Submersible Pump Set) :-Repair and alignment of Stainless Steel Shaft as per specification and sizes of old damaged shaft complete job including all sizes, key grooves, threading with check nut, straightning and allignment in all leads and lifts. |
| 22 | Manufacturing and Fixing of gun metal defuser rings of pump set as per specifications and finishing to the accorate size in all leads and lifts. |
| 23 | Manufacturing and Fixing of gun metal defuser bush of pump set as per specifications and finishing to the accorate size in all leads and lifts. |
| 24 | Repair of gunmetal impaller of pump set with filling brass welding for damaged portion and finishing to the accorate size in all leads and lifts. |
| 25 | Providing and Fixing allied materials such as studs, bolts keys, water seals, packing asbestos sheet etc. complete job in all respect in all leads and lifts. |
| 26 | Providing and Fixing new gun metal impaller complete with turning, balancing as per accorate size in all leads and lifts. |
| 27 | Dismentalling, assembling and testing of pumpset as per entire satisfaction of the Engineer-in-Charge in all leads and lifts. |
| 28 | Submersible Motors :-Rewinding of 7.50 HP Submersible Motor with PVC insulated copper wire of reputed make complete job with insulated paper, wooden wedges, insulated tape, solder wire etc. in all respect as per entire satisfaction of the Engineer-in-Charge in all leads and lifts. |
| 29 | Repair and alignment of rotor shaft as per filling of welding and turning to the accorate sizes with repair old slots of wedges in all leads and lifts. |
| 30 | Providing and Fixing gun metal bush for rotor shaft complete job with turning and finishing of bushes to the accorate size of rotor shaft in all leads and lifts. |
| 31 | Providing and Fixing steel rubber bushes in all leads and lifts. |
| 32 | Providing and Fixing Disc Set for submersible motor of 7.50 HP set with base and carbon disc set in all leads and lifts. Please Enable Macros to View BoQ information Terms and conditions |
| 33 | The work should be executed as per PWD/JSV specifications and to the entire satisfactions of the Engineer-in Charge. |
| 34 | The Contractor will be fully responsible for watch and ward of material at site of work. |
| 35 | Nothing shall be paid for rejected/sub-standard material at site of works. |
| 36 | The work should be completed in the stipulated period. |
| 37 | The rates should be inclusive with GST and carriage |
| 38 | 2 % rebate on account of dismentalled materials. |
| 39 | 1% labour cess will be deducted from the bill of the contractor. |
| 40 | GST as applicable will be borne by the contractor. |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender