Tender For Dr. R. Ahmed Dental College & Hospital - Old Building - Repair And Restoration Of The Distressed Chajjas On The South Side Of The Building From Ground Floor To 3Rd Floor, During The Year 2026-2027.
Tender Value
1.92 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
9 days left
EMD
3846
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dr. R. Ahmed Dental College & Hospital - Old Building - Repair And Restoration Of The Distressed Chajjas On The South Side Of The Building From Ground Floor To 3Rd Floor, During The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, fitting & fixing double layer nylon thread net (1 mm thick 16 mm x 16 mm grid coverage of 3.75 Sqm/kg and 1 mm thick 60 mm x 60 mm grid coverage of 7.50 Sqm/kg) for exterior scaffolding safety purpose with peripheral nylon thread or rope including fabrication cost & other finishing cost.The rate includes the cost of materials, labour & lifting charges complete in all respect as per drawing, design and instruction of the Engineer-in-Charge. |
| 2 | DISMANTLING AND DEMOLISHING -Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.Ground floor, 1st floor, 2nd floor & 3rd floor : |
| 3 | Extra for cutting reinforcement bars manually/ by mechanical means inR.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.Ground floor, 1st floor, 2nd floor & 3rd floor : |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.Ground floor, 1st floor, 2nd floor & 3rd floor : |
| 5 | NEW TECHNOLOGIES AND MATERIALS -Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24hours of its application with wire brush and thoroughly washing with waterand allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter -From Ground floor to 3rd floor : |
| 6 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 7 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications anddirections of Engineer-in-charge.25 mm average thickness in 2 layers. - |
| 8 | REINFORCED CEMENT CONCRETE -Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing andreinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).Ground floor to 3rd floor : |
| 9 | FORM WORK -Centering and shuttering including strutting, propping etc. and removal of form forWeather shed, Chajjas, corbels etc., including edges. |
| 10 | CEMENT PLASTER (IN FINE SAND) -12 mm cement plaster of mix -1:4 (1 cement: 4 fine sand) : |
| 11 | DISMANTLING AND DEMOLISHING -Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender