Public Administrative Department Local Bodies Closing in 5 days TDR #57406979

Tender For Resurfacing & Strengthening Of Bituminous Road & Widening With Interlocking Tiles Both Side Along Dankaur Sikandrabad Road From Village Dankaur To Gadhana Marg, Greater Noida.

Issued by Local Bodies · Gautam Buddha Nagar, Uttar Pradesh
Tender Value
1.79 Crore
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
3.60 Lakhs
Bank guarantee accepted
Document Fee
2980
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Resurfacing & Strengthening Of Bituminous Road & Widening With Interlocking Tiles Both Side Along Dankaur Sikandrabad Road From Village Dankaur To Gadhana Marg, Greater Noida.

BOQ

Name of Work:- Resurfacing & Strengthening of Bituminous road & widening with Interlocking tiles both side along Dankaur Sikandrabad road from village Dankaur to Gadhana marg, Greater Noida.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1)
2Granular sub-base with graded material, plant mix method Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. MORTH/4.01/401(A)
3Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.morth (MORTH-407)
4Supply of 80mm thick ISI marked Shaped machanically compressed Interlocking cement concerete paver blocks, smooth high laoss finish, skid resistant; manufactured from rubber moulds through vibrocompressiojn mechanism, high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping. The compressive strength of concerete paver block shall not be less than 30 MPa and weight 4.5kg per No. confirming to IS: 15658-2006. : Gray Base (SOR-2025/2.5(a))
5Laying of Interlocking Tiles of 60/80/100 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, T&P etc complete But excluding cost of Tile as directed by Engineer in charge. (SOR-2025/5.5.07)
6Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR-2023/6.1.1)
712 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR-2023/13.4.1)
8Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means. (MORTH 502/5.01/A(i))
9Providing and applying tack coat with bitumen grade VG-10 using emulsion pressure distributor at the rate of 0.25 kg per Sqm on the prepared bituminous surface cleaned with mechnical broom. (MORTH-503(II)/502)
10Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.
1140mm compacted thickness with bitumen VG-30 [email protected] by Weight of total mix
12Providing and applying tack coat with bitumen grade VG-10 using emulsion pressure distributor at the rate of 0.25 kg per Sqm on the prepared bituminous surface cleaned with mechnical broom. (MORTH-503(II)/502)
13Providing and laying bitumen concrete with 100-120 ΤΡΗ batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder [email protected]% of mix and filler transporting the hot mix to work site laying with hydrostatic paver finsher with sensor control to the required grade, level, and alignment rolling with smooth, wheeled, vibrator and tendom roller to achieve the desired compaction as per MORTH specification clause 507 complete in all respect (MORTH//GNIDA)
1430mm compacted thickness with bitumen penetration of CRMB-55 @4.97% by weight of total mix
15Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes (SOR-2025/Ch-6.2/MORTH-802 (8.13))
16Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/4.1.3)
17Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57406979
AUTHORITY Local Bodies
TENDER VALUE 1.79 Crore
LAST DATE 18-09-2026
Authority
Authority Name Greater Noida Industrial Development Authority
Work Description Tender for Resurfacing & Strengthening Of Bituminous Road & Widening With Interlocking Tiles Both Side Along Dankaur Sikandrabad Road From Village Dankaur To Gadhana Marg, Greater Noida.
Basic Detail
Tender No SM/(E-TENDER CELL)/2026/808 DATED-03.09.2026
Bidding Type Tender
Location
City Gautam Buddha Nagar
State Uttar Pradesh
Key Dates
Publish Date 08 Sep 2026
Submission Date 18 Sep 2026
Open Date 21 Sep 2026
Finance
Tender Value 1.79 Crore
Tender Fee 2980
EMD 3.60 Lakhs
Exemption Not Available
Document List
631a00c0-6432-4447-96fd-a44eee603827.html
BOQ_2225599.xls
PreQ_Resu_Dankaur.pdf
Tendernotice_1 (75).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Sep 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

631a00c0-6432-4447-96fd-a44eee603827.html

xls

BOQ_2225599.xls

pdf

PreQ_Resu_Dankaur.pdf

pdf

Tendernotice_1 (75).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders