Tender For Providing Street Light On 45 Meter Wide Road Infront Of 220 Kv Sub-Station Jalpura, Greater Noida.
Tender Value
26.34 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
53000
Bank guarantee accepted
Document Fee
860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Street Light On 45 Meter Wide Road Infront Of 220 Kv Sub-Station Jalpura, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. UPPWD 2018 / Sl. No. 646 |
| 2 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. UPPWD 2018 / Sl. No. 641 |
| 3 | Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 VoItAC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4- 5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.20.95, IP- 66,IK-10, CRI >80 , under voltage and over voltage protection,EMI- EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , |
| 4 | SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 Im/Watt output ..LM79 &LM80 Testreport from NABL lab for all testing required for LED fixtures as perBIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). DSR (E&M )-2025/ Pg. No. 8.14 |
| 5 | 120 Watt |
| 6 | 200 Watt |
| 7 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.UPPWD 2018 / Sl. No. 501 |
| 8 | 16 sq. mm 4 core (i) |
| 9 | 50 sq. mm 3-1/2 core (L) |
| 10 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge.UPPWD 2018 / Sl. No. 503 |
| 11 | 16sq. mm 4 core (i) |
| 12 | 50 sq. mm 3-1/2 core (L) |
| 13 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.UPPWD 2018 / Sl. No. 504 |
| 14 | 25 sq. mm |
| 15 | 16 sq. mm |
| 16 | 50 sq. mm |
| 17 | Numbering of poles with combination of yellow and black colour paint etc. complete in all respect as per direction of the Engineer-Incharge at SITE SOR 42/ FTS No. 128181 |
| 18 | Supply and Burying of Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. DSR(E&M)-2025 / Sl. No. 5.2 |
| 19 | S/L of 90 mm dia DWC pipe for drawing of power cable across the road by drilling of 120 mm dia at 1 mtr. below the road level thereby doing the work of providing DWC pipe by trenchless method GNIDA Approved Rate 2024 / Sl. No. 15 |
| 20 | S/F of G.I. pipe 100 mm dia 'B' class ZINDAL / TATA make including required material T&P etc. complete in all respect as per direction of the Engineer-Incharge at SITE SOR 37/ FTS No. 128181 |
| 21 | Supply & Fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. below the GL complete with bolts & nuts & GI earth wire 7/14. Complete in all respect, as per direction of E-I/C.GNIDA Approved Rate 2024 / Sl. No. 41 |
| 22 | Supplying and drawing 3x2.5sq.mm sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.DSR(E&M)-2025 / Sl. No. 1.17.12 |
| 23 | Providing and fixing 25 mm X 5 mm Gl. strip on surface or in recess for connections etc. as required.DSR(E&M)-2025 / Sl. No. 5.15 |
| 24 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN (F-II)UPPWD 2018 / Sl. No. 807 |
| 25 | Labour Cess and GST will be paid extra as per govt. orders Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender