Tender For Mfg. Supply & Fitting Fixing Of Base Structure Of Vacuum Pump With Repairing Plumbing Works Of Service Pump & Vacuum Pump With Allied Works At Bdps.
Tender Value
1.17 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
5 days left
EMD
2500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mfg. Supply & Fitting Fixing Of Base Structure Of Vacuum Pump With Repairing Plumbing Works Of Service Pump & Vacuum Pump With Allied Works At Bdps.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, fitting andfixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specials viz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducingsocket,reducing tee, short piece etc.fitted with holder bats clamps,including cutting pipes,fitting, fixing etc.complete in all respectincluding cost of all necessary fittings as required,jointing materials inany position above ground. For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 50 mm |
| 2 | Supplying, fitting andfixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specials viz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducingsocket,reducing tee, short piece etc.fitted with holder bats clamps,including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials inany position above ground. For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 25 mm |
| 3 | C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 andhaving all cast iron components as per I.S. 780/71 solid forgedbronze inside screw spindle having ultimate tensile strength not lessthan 4.72 MT per sq. cm. Spindle nut valve and seat faces of hardwear resisting, manufactured from best quality gunmetal conformingto I.S. 780/71, painted black all over with asphalt base paint tested to21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwisedirection, fitted and fixed complete. (iii) 100mm |
| 4 | FABRICATION, SUPPLY, STORING AT SITE, INSTALLATION &COMMISSIONING OF TRASHRACK/ BAR SCREEN/ GRATINGCONFIRMING TO RELEVANT IS CODES ( IS: 11388, IS : 2062)FABRICATED WITH STRUCTURAL STEEL SECTIONS SUCH ASMS FLAT, CHANNELS, ANGLES ETC. INCLUDING COST OFMATERIALS, MACHINERY, LABOUR, CUTTING, ALIGING,WELDING AS PER APPROVED DRAWING INCLUDINGTRANSPORTATION CHARGES AS PER DIRECTION |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, inground floor as per relevant IS codes.(i) Pakur Variety |
| 6 | Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off orchamfering corners as directed and raking out joints includingthroating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[Excluding cost of chipping over concretesurface](ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 7 | Priming one coat onsteel or other metal surface with synthetic oil bound primer ofapproved quality including smoothening surfaces by sand paperingetc (This item is applicable to new work or old work when the originalsurface has been exposed by removal of old paint.) |
| 8 | Painting with best quality synthetic enamelpaint of approved make and brand including smoothening surface bysand papering etc. including using of approved putty etc. on thesurface, if necessary :(b) On steel or other metal surface :With supergloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 9 | Supply of Chlorinated Polyvinyl Chloride (CPVC)pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (c) 25mm |
| 10 | OriginalWorks 12 Supplying,fitting and fixing check valve (horizontal) G.M.tested to 21 kg per sq. cm.(vi) 50 mm |
| 11 | Plumbing Mistry |
| 12 | Plumbing Helper |
| 13 | Santras |
| 14 | Sub Total |
| 15 | GST 18% |
| 16 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender