Tender For Replacement Of Existing Acsr Zebra Conductor By Htls Conductor ( To Carry Minimum Current 1200 A) I.R.O 220 Kv Transmission Lines -1. Jeerat -Barasat D/C (Ckm= 42.00);2. Ktpp-Food Park D/C (Ckm= 104.00); 3. Jangalpur-Food Park D/C (Ckm= 12
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
17 days left
EMD
1.50 Crore
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Existing Acsr Zebra Conductor By Htls Conductor ( To Carry Minimum Current 1200 A) I.R.O 220 Kv Transmission Lines -1. Jeerat -Barasat D/C (Ckm= 42.00);2. Ktpp-Food Park D/C (Ckm= 104.00); 3. Jangalpur-Food Park D/C (Ckm= 12.00); 4. Subhasgram Pgcilsubhasgram Wbsetcl D/C Along With Replacement Of 220 Kv Two Main & One Transfer Bus Conductors At Subhasgram Wbsetcl Substation (Ckm=02.50); 5. Durgapur 220-Shayam Sel S/C (Ckm=34.9); 6.Durgapur 220-Mongalpur S/C (Ckm=31.08) And Allied Works On Turn-Key Basis.
BOQ
| Sl. No. | Item Description |
| 1 | HTLS conductor |
| 2 | Replacement of existing ACSR Zebra conductor by HTLS conductor (to carry minimum current 1200 A) i.r.o1. Jeerat -Barasat D/C (CKM= 42.00)2. KTPP-Food Park D/C (CKM= 104.00)3. Jangalpur-Food Park D/C (CKM= 12.00)4. Subhasgram PGCILSubhasgram WBSETCL D/C along with replacement of 220 kV Two Main & One Transfer Bus Conductors at Subhasgram WBSETCL Substation (CKM=02.50)5. Durgapur 220-SHAYAM SEL S/C (CKM=34.9)6.Durgapur 220-Mongalpur S/C (CKM=31.08) |
| 3 | 220 kV, Jeerat - Barasat D/C Transmission Line (CKM= 42.00) |
| 4 | 220 kV KTPP-Food Park D/CTransmission Line(CKM= 104.00) |
| 5 | 220 kV Jangalpur-Food Park D/C Transmission Line (CKM= 12.00) |
| 6 | 220 KV Subhasgram (PGCIL) -Subhasgram (WBSETCL) D/C Transmission Line with the Replacement of Existing ACSR Conductor of 220 kV |
| 7 | 220 kV Durgapur 220 kV - SHYAM SEL S/C Transmission Line (CKM= 34.90) |
| 8 | 220 kV DURGAPUR 220KV - MONGALPUR 220 KV S/C Transmission Line (CKM= 31.08) |
| 9 | Solid Carbon Composite core HTLS Conductor for as per Technical Specification |
| 10 | Solid Carbon Composite core HTLS Conductor to carry minimum current of 1200A for 220 kV, Jeerat - Barasat D/C Transmission Line (CKM= 42.00), as per technical specification |
| 11 | Above HTLS Conductor -as SPARE |
| 12 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification |
| 13 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing SingleTension Hardware Fittings Complete. |
| 14 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Double Tension Hardware Fittings Complete. |
| 15 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 16 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 17 | Vibration Damper |
| 18 | Suspension Clamp suitable to match with the existing Pilot Suspension Hardware Fittings Complete. |
| 19 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 20 | Compression type connector for CT Stud to HTLS Conductor |
| 21 | T-Type,Terminal Connector for 220 kV AIR Bushing Stud (80- MM DIA) to HTLS Conductor |
| 22 | Compression type T-Connector suitable for above HTLS conductor to above HTLS Conductor |
| 23 | T-Connector suitable for above HTLS conductor to PAD |
| 24 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification- as SPARE |
| 25 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single Tension Hardware Fittings Complete. |
| 26 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Double Tension Hardware Fittings Complete. |
| 27 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 28 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 29 | Vibration Damper |
| 30 | Suspension Clamp suitable to match with the existing Pilot Suspension Hardware Fittings Complete. |
| 31 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 32 | Compression type connector for CT Stud to HTLS Conductor |
| 33 | Mid Span Compression Joint |
| 34 | Compression Type Repair Sleeve |
| 35 | T-Type,Terminal Connector for 220 kV AIR Bushing Stud (80- MM DIA) to HTLS Conductor |
| 36 | Compression type T-Connector suitable for above HTLS conductor to above HTLS Conductor |
| 37 | T-Connector suitable for above HTLS conductor to PAD |
| 38 | Dismantling of Existing ACSR conductor with hardware fittings in 220 kV, Jeerat - Barasat D/C Transmission Line and handing over the same at WBSETCL Store as per direction of E-I-C. |
| 39 | Erection of supplied HTLS conductor with hardware and accessories in the above Line as per Technical Specification.(All Road Crossings/ Building crossings are to be erected with the Double Tension /Suspension Fittings as per the direction of E-I-C) |
| 40 | Solid Carbon Composite core HTLS Conductor as per Technical Specification |
| 41 | Solid Carbon Composite core HTLS Conductor to carry minimum current of 1200A for 220 kV KTPP-Food Park D/CTransmission Line(CKM= 104.00), as per technical specification. |
| 42 | Above HTLS Conductor -as SPARE |
| 43 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification |
| 44 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single Tension Hardware Fittings Complete. |
| 45 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Double Tension Hardware Fittings Complete. |
| 46 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 47 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 48 | Vibration Damper |
| 49 | Suspension Clamp suitable to match with the existing Pilot Suspension Hardware Fittings Complete. |
| 50 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 51 | Compression type connector for CT Stud to HTLS Conductor |
| 52 | T-Type,Terminal Connector for 220 kV AIR Bushing Stud (80- MM DIA) to HTLS Conductor |
| 53 | Compression type T-Connector suitable for above HTLS conductor to above HTLS Conductor |
| 54 | Compression type T-Connector suitable for HTLS Conductor to 3 Inch AL Bus Pipe |
| 55 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification- as SPARE |
| 56 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single Tension Hardware Fittings Complete. |
| 57 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Double Tension Hardware Fittings Complete. |
| 58 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 59 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 60 | Vibration Damper |
| 61 | Suspension Clamp suitable to match with the existing Pilot Suspension Hardware Fittings Complete. |
| 62 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 63 | Compression type connector for CT Stud to HTLS Conductor |
| 64 | Mid Span Compression Joint |
| 65 | Compression Type Repair Sleeve |
| 66 | T-Type,Terminal Connector for 220 kV AIR Bushing Stud (80- MM DIA) to HTLS Conductor |
| 67 | Compression type T-Connector suitable for above HTLS conductor to above HTLS Conductor |
| 68 | Compression type T-Connector suitable for HTLS Conductor to 3 Inch AL Bus Pipe |
| 69 | Dismantling of Existing ACSR conductor with hardware fittings in 220 kV KTPP-Food Park D/C Transmission Line and handing over the same at WBSETCL Store as per direction of E-I-C. |
| 70 | Erection of supplied HTLS conductor with hardware and accessories in the above Line as per Technical Specification.(All Road Crossings/ Building crossings are to be erected with the Double Tension /Suspension Fittings as per the direction of E-I-C) |
| 71 | Solid Carbon Composite core HTLS Conductor as per Technical Specification |
| 72 | Solid Carbon Composite core HTLS Conductor to carry minimum current of 1200A for 220 kV, Jangalpur-Food Park D/C Transmission Line (CKM= 12.00) , as per technical specification. |
| 73 | Above HTLS Conductor -as SPARE |
| 74 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification |
| 75 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single Tension Hardware Fittings Complete. |
| 76 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Double Tension Hardware Fittings Complete. |
| 77 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 78 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 79 | Vibration Damper |
| 80 | Suspension Clamp suitable to match with the existing Pilot Suspension Hardware Fittings Complete. |
| 81 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 82 | Compression type connector for CT Stud to HTLS Conductor |
| 83 | T-Type,Terminal Connector for 220 kV AIR Bushing Stud (80- MM DIA) to HTLS Conductor |
| 84 | Compression type T-Connector suitable for above HTLS conductor to above HTLS Conductor |
| 85 | Compression type T-Connector suitable for HTLS Conductor to 3 Inch AL Bus Pipe |
| 86 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification- as SPARE |
| 87 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single Tension Hardware Fittings Complete. |
| 88 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Double Tension Hardware Fittings Complete. |
| 89 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 90 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 91 | Vibration Damper |
| 92 | Suspension Clamp suitable to match with the existing Pilot Suspension Hardware Fittings Complete. |
| 93 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 94 | Compression type connector for CT Stud to HTLS Conductor |
| 95 | Mid Span Compression Joint |
| 96 | Compression Type Repair Sleeve |
| 97 | T-Type,Terminal Connector for 220 kV AIR Bushing Stud (80- MM DIA) to HTLS Conductor |
| 98 | Compression type T-Connector suitable for HTLS Conductor to 3 Inch AL Bus Pipe |
| 99 | Dismantling of Existing ACSR conductor with hardware fittings in 220 kV Jangalpur-Food Park D/C Transmission Line and handing over the same at WBSETCL Store as per direction of E-I-C. |
| 100 | Erection of supplied HTLS conductor with hardware and accessories in the above Line as per Technical Specification.(All Road Crossings/ Building crossings are to be erected with the Double Tension /Suspension Fittings as per the direction of E-I-C) |
| 101 | Solid Carbon Composite core HTLS Conductor as per Technical Specification |
| 102 | TWIN HTLS Conductor (each conductor to carry minimum current of 1200A.) for 220 KV Subhasgram (PGCIL) -Subhasgram (WBSETCL) D/C Transmission Line including 220 kV, 2 (Two) Main Bus and 01 (One)Transfer Bus. Remarks: Circuit consisting of 3 Phase with Twin HTLS Conductor in each Phase |
| 103 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification |
| 104 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single/Double Tension Hardware Fittings Complete suitable for Twin HTLS Conductor. |
| 105 | Suspension Clamp suitable to match with the existing Single/Double Suspension Hardware Fittings Complete suitable for Twin HTLS Conductor. |
| 106 | Vibration Damper |
| 107 | Compression type T-Connector suitable for above HTLS conductor to HTLS Conductor |
| 108 | Spacer for Twin HTLS |
| 109 | Compression type connector for Single HTLS conductor to 40mm Dia Isolator Stud |
| 110 | Compression type connector for Single HTLS conductor to 30 mm Dia CT Stud |
| 111 | Compression type connector for Single HTLS conductor to 40mm Dia CT Stud |
| 112 | Compression type connector for Single HTLS conductor to 3 Inch IPS |
| 113 | Compression type connector for Single HTLS conductor to Twin HTLS Conductor-T-type |
| 114 | Compression type connector for Single HTLS conductor to PAD |
| 115 | Compression type connector for Single HTLS conductor to Single HTLS Conductor-T-type |
| 116 | Compression type connector for Twin HTLS conductor to 50 mm Buspipe |
| 117 | Compression type connector for Twin HTLS conductor to 40mm Dia Stud/PAD |
| 118 | Compression type connector for Twin HTLS conductor to 3 Inch IPS |
| 119 | Compression type connector for Twin HTLS conductor to 40mm Dia Stud/PAD |
| 120 | Compression type connector for Twin HTLS conductor to Twin HTLS conductor |
| 121 | HARDWARE FITTINGS AND CLAMP & CONNECTOR AS SPARE AS PER TECHNICAL SPECIFICATION |
| 122 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the Existing Single/Double Tension Hardware Fittings Complete suitable for Twin HTLS Conductor. |
| 123 | Suspension Clamp suitable to match with the existing Single/Double Suspension Hardware Fittings Complete suitable for Twin HTLS Conductor. |
| 124 | Vibration Damper |
| 125 | Compression type T-Connector suitable for above HTLS conductor to HTLS Conductor |
| 126 | Spacer for Twin HTLS |
| 127 | Compression type connector for Single HTLS conductor to 40mm Dia Isolator Stud |
| 128 | Compression type connector for Single HTLS conductor to 30 mm Dia CT Stud |
| 129 | Compression type connector for Single HTLS conductor to 40mm Dia CT Stud |
| 130 | Compression type connector for Single HTLS conductor to 3 Inch IPS |
| 131 | Compression type connector for Single HTLS conductor to Twin HTLS Conductor-T-type |
| 132 | Compression type connector for Single HTLS conductor to PAD |
| 133 | Compression type connector for Single HTLS conductor to Single HTLS Conductor-T-type |
| 134 | Compression type connector for Twin HTLS conductor to 50 mm Buspipe |
| 135 | Compression type connector for Twin HTLS conductor to 40mm Dia Stud/PAD |
| 136 | Compression type connector for Twin HTLS conductor to 3 Inch IPS |
| 137 | Compression type connector for Twin HTLS conductor to 40mm Dia Stud/PAD |
| 138 | Compression type connector for Twin HTLS conductor to Twin HTLS conductor |
| 139 | Mid Span Compression Joint |
| 140 | Compression Type Repair Sleeve |
| 141 | Dismantling of Existing Twin ACSR conductor with hardware fittings in 220 KV Subhasgram (PGCIL) -Subhasgram (WBSETCL) D/C Transmission Line including 220 kV, 2 (Two) Main Bus and 01 (One)Transfer Bus and handing over the same at WBSETCL Store as per direction of E-I-C. |
| 142 | Erection of TWIN HTLS conductor (to be supplied by WBSETCL) with the hardwares and accessories in the above Line including 220 kV, 2 (Two) Main Bus and 01 (One)Transfer Bus as per Technical Specification.(All Road Crossings/ Building crossings are to be erected with the Double Tension /Suspension Fittings as per the direction of E-I-C) |
| 143 | Solid Carbon Composite core HTLS Conductor as per Technical Specification |
| 144 | Solid Carbon Composite core HTLS Conductor to carry minimum current of 1200A, for 220 kV Durgapur 220 kV - SHYAM SEL S/C Transmission Line (CKM= 34.90), as per technical specification. |
| 145 | Above HTLS Conductor -as SPARE |
| 146 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification |
| 147 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Single/ Double Tension Hardware Fittings Complete. |
| 148 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Double Tension Hardware Fittings Complete. |
| 149 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 150 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 151 | Vibration Damper |
| 152 | Suspension Clamp suitable to match with the existing Pilot Insulator Suspension Hardware Fittings Complete. |
| 153 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 154 | Compression type connector for CT Stud to HTLS Conductor |
| 155 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification- as SPARE |
| 156 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Single/ Double Tension Hardware Fittings Complete. |
| 157 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Double Tension Hardware Fittings Complete. |
| 158 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 159 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 160 | Vibration Damper |
| 161 | Suspension Clamp suitable to match with the existing Pilot Insulator Suspension Hardware Fittings Complete. |
| 162 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 163 | Compression type connector for CT Stud to HTLS Conductor |
| 164 | Mid Span Compression Joint |
| 165 | Compression Type Repair Sleeve |
| 166 | Dismantling of Existing ACSR conductor with hardware fittings in 220 kV Durgapur 220 kV - SHYAM SEL S/C Transmission Line and handing over the same at WBSETCL Store as per direction of E-I-C. |
| 167 | Erection of supplied HTLS conductor with hardware and accessories in the above Line as per Technical Specification.(All Road Crossings/ Building crossings are to be erected with the Double Tension /Suspension Fittings as per the direction of E-I-C) |
| 168 | Solid Carbon Composite core HTLS Conductor as per Technical Specification |
| 169 | Solid Carbon Composite core HTLS Conductor to carry minimum current of 1200A for 220 kV, DURGAPUR 220KV - MONGALPUR 220 KV S/C Transmission Line (CKM= 31.08), as per technical specification. |
| 170 | Above HTLS Conductor -as SPARE |
| 171 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification |
| 172 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Single Tension Hardware Fittings Complete. |
| 173 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Double Tension Hardware Fittings Complete. |
| 174 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 175 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 176 | Vibration Damper |
| 177 | Suspension Clamp suitable to match with the existing Pilot Insulator Suspension Hardware Fittings Complete. |
| 178 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 179 | Compression type connector for CT Stud to HTLS Conductor |
| 180 | Hardware Fittings and Clamp & Connector for above HTLS Conductor, as per Technical Specification- as SPARE |
| 181 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Single Tension Hardware Fittings Complete. |
| 182 | Compression type Tension Clamp (Dead End Assembly) suitable to match with the existing Double Tension Hardware Fittings Complete. |
| 183 | Suspension Clamp suitable to match with the existing Single Suspension Hardware Fittings Complete. |
| 184 | Suspension Clamp suitable to match with the existing Double Suspension Hardware Fittings Complete. |
| 185 | Vibration Damper |
| 186 | Suspension Clamp suitable to match with the existing Pilot Insulator Suspension Hardware Fittings Complete. |
| 187 | Compression type T-Connector suitable for above HTLS conductor to Existing ACSR Conductor |
| 188 | Compression type connector for CT Stud to HTLS Conductor |
| 189 | Mid Span Compression Joint |
| 190 | Compression Type Repair Sleeve |
| 191 | Dismantling of Existing ACSR conductor with hardware fittings in 220 kV Durgapur 220 kV - Mongalpur 220 kV S/C Transmission Line and handing over the same at WBSETCL Store as per direction of E-I-C. |
| 192 | Erection of supplied HTLS conductor with hardware and accessories in the above Line as per Technical Specification.(All Road Crossings/ Building crossings are to be erected with the Double Tension /Suspension Fittings as per the direction of E-I-C) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender