Tender For Deposit-Deposit Work -Srgptc Thriprayar- Providing False Ceiling And Truss Work In Drawing Hall Of Civil Engineering Department-Work-General Civil Work
Tender Value
7.62 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
6 days left
EMD
19066
Bank guarantee accepted
Document Fee
1685
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Deposit Work -Srgptc Thriprayar- Providing False Ceiling And Truss Work In Drawing Hall Of Civil Engineering Department-Work-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Estimate |
| 2 | OD282739/2025-2026:Providing and fixing false ceiling of cement fiber design tile of size 595 x 595 mm in true horizontal level, suspended on metal grid of hot dipped galvanized steel section (galvanized @ 120 gm /sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum ) sheet,spaced at 1200 mm center to center and cross "T" of size 24 x 25 mm made of .30 mm thick (minimum) sheet,1200 mm long spaced between main "T" at 600 mm center to center to from a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 24 x 25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600 mm panel to from grids of 600 x600 mm and wall angle of size 24 x24 x .3 mm and laying false ceiling tiles of approved texture in the grid including ,required cutting/ making,opening for service like diffusers , grills, light fittings, fixtures, smoke detectors etc.Main "T" runner to be suspended from ceiling using G I slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners , 4 mm G I adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T - sections shall be pre-painted with polyester paint , all complete for all heights as per specifications, drawings and directed by engineer - in- charge.4 mm thick cement fiber design tile 595 mm x 595 mm. |
| 3 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet |
| 4 | OD282738/2025-2026:Engaging coolies |
| 5 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 6 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | OD282881/2025-2026:Dismantling existing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work |
| 8 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 10 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 11 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 12 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 13 | OD292524/2025-2026:Engaging carpenter 1st class Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender