Tender For Fabricating And Erecting Containersed Gents Toilet At Parking Area Under Thekkady Range During 2026-27
Tender Value
8.87 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
1 days left
EMD
22175
Bank guarantee accepted
Document Fee
2130
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabricating And Erecting Containersed Gents Toilet At Parking Area Under Thekkady Range During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Fixing ISO Refurbished Steel Container of size 6.00x2.40 width - Raw Steel Sheets, Pressing/Forming Components, Assembly of Sub-assemblies/boxing/Total Welding Including wastage, Press shop Costs, Fabrication Costs, including consumables, transport cost unloading and placing Container on concrete blocks using Men and Machinery at site. |
| 2 | Painting of Whole Container with - acid cleaning/rust removal at boxed stage, then base coat with bituminous paint, priming with zinc chromate, top coated with Marine grade enamel paint of approved brand and manufacture to give an even shade. |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 4 | Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fastners of 8 mm dia and 75 mm long bolt including providing aluminium - washers 2 mm thick 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per drawing and direction of Engineer-in-charge. Powder coated aluminium sheet 2.5 mm thick (minimum thickness of powder coating 50 micron). |
| 5 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Double charge vitrified tile polished finish of size 600 x 1200 mm. |
| 6 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including |
| 7 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6 mm for diagonal braces. |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work. |
| 10 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturer's specifications: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 11 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The Styles & rails shall be 75 mm x 30 mm having wall thickness 5 mm, the styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge. Decorative finish (both side wood grained finish). |
| 12 | 2. SANITARY INSTALLATIONSProviding and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 13 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357 mm. |
| 14 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC automatic flushing cistern with fittings, standard size, GI/PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:Range of three squatting plates with 10 litre PVC. automatic flushing cistern. |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 16 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement: 600 mm long towel rail (total length 645 mm, width 78 mm, height 88 mm, wt less than 190 gms). |
| 17 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms. |
| 18 | Supplying and fixing CP Health Faucet superior quality (Jaquar or equivalent make) including cost of materials and labour charges etc complete as per direction of site Engineer-in-charge. |
| 19 | Providing and fixing PVC pipes, fittings including fixing pipe with clamps at 1.00 m spacing. Jointing with solvent cement and testing complete: 25 mm dia 10Kgf/cm2 - Internal work - Exposed on wall. |
| 20 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 21 | Providing and fixing PVC pipes, fittings including fixing pipe with clamps at 1.00 m spacing. Jointing with solvent cement and testing complete: 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall. |
| 22 | Providing and fixing PVC pipes including solvent cement jointing, trenching, refilling & testing of joints complete: 63 mm dia 6Kgf/cm2. |
| 23 | Providing and placing on terrace polyethylene water storage tank: ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for pipes. |
| 24 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms: 15 mm nominal bore. |
| 25 | Providing and fixing C.P brass stop cock (concealed) of standard design and approved make conforming to IS: 8931: 15 mm nominal bore. |
| 26 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931: 15 mm nominal bore. |
| 27 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour: 15 mm nominal bore with 14 cm length |
| 28 | 3. ELECTRIFICATION WORKWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, MS box and earthing point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A |
| 29 | Supplying and fixing brass batten / angle holder including connection etc. as required. |
| 30 | Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required. Single pole |
| 31 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 32 | Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps |
| 33 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door |
| 34 | Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 4 sq mm |
| 35 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 36 | LS amount for electrification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender