Tender For Construction Of Industrial Approach Road At Barhi Industrial Area, (Plot No-11E&11F) Hazaribagh, Jharkhand.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
3 days left
EMD
3.48 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hazaribagh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Industrial Approach Road At Barhi Industrial Area, (Plot No-11E&11F) Hazaribagh, Jharkhand.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I. |
| 2 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M & lift of 1.5 M all complete as per building specification and direction of E/I.( mode of measurement compacted volume) |
| 3 | Providing coarse clean sand/Crusher Dust in filling in foundation trenches or plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of materials, Labour, royality & taxes all complete as per building specification and direction of E/I. ( mode of measurement compacted volume) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level. 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20 nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,columns,pires,abutments,pillarss,post, sturts,buttresses,lacingcourses,parapets,copping,bed blocks,anchore blocks,plain windows sills,fillets,sunken floor etc.upto floor five level,excluding the cost of centering,shuttering and finishing.-1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20 nominal size) |
| 6 | Centering and shuttering including strutting,propping etc. and removal of form for:-Column,Pillars,Piers,Abutment,Post and Sturts. |
| 7 | Reinforced cement concrete work in beams,suspended floors.roofs having slope upto 15 degree landings balconies,shelves,chajjas,lintels,band,plain windows sills,stair cases,above plinth level upto floor five level ,excluding the cost of centering,shuttering and finishing.-1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20 nominal size) |
| 8 | Centering and shuttering including strutting,propping etc. and removal of form for:-Edges of lab and brecks in floors and wall-For Drain,Above 20 cm wide-For Road |
| 9 | Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 10 | Providing primer two coats of red lead paint of approved make over new steel surface including prepairing the surface after cleaning,removing dirt,scales.smoke,grease and sand papering,including cost of scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 11 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly,scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 12 | Providing and laying made chamfered edge cement concrete paver blocks in foot- path,parks,lawns.drive ways or light traffic,parking etc. or required strength,thickness and size/shape,made by table vibratory method using PU mould, laid in required colour and pattern over 50 mm thick compaced bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compacyionby using the plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand,complete as as per direction of E/I-80 mm thick Cement Concrete Paver block of M-35 grade with approved colour, design and pattern |
| 13 | Construction of granular sub- bae by providing close graded material conforming to specification.mixing in a machanical mix plant at OMC, carriage of mixed materials by tippers to work site,for all leads ans lifts,spreading in uniform layer of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density,complete as per specification and direction of E/I-With materials conforming to Grade-I (Size range 75 mm to 0.075 mm) having CBR Value-25 |
| 14 | Providing,laying,spreading and compacting graded stone aggregate (Sizerange 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads and lift,laying in uniform layers with machanical paverfinisher in sub-basa/base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonene capacity to achievethe desired density,complete as per specificification and direction of E/I |
| 15 | Providing and laying design mix cement concrete of M-30 grade,in roads/ taxi tracks/runways,using cement content as per design mix,using coarse sand and graded stone aggregate of 40 mm nominal size in appropiate proportions as per approved ans specified design criteria,providing dowel bars with sleeve/tie bars wherever required,laying at size,spreading and compacting machanically by using needle and surface vibrators,levelling to required slope/camber,finishing with required texture,including teel form work sturdy M.S channel section,curing,making provision for contraction/expansion,construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine,providing and filling joints with approved joint filler and sealants,complete all as per direction of E/I (Item of joint,filler,sealant,dowel bars with sleeve/tie bars to be paid separately)-Cement Concrete prepared with batch machine- |
| 16 | Providing weep hole in brick/Pain reinforcement concrete abutment,wing wall,retuern wall with 100mm dia. AC pipe extending through the full width of structure with slope of 1V:20 H towards drawing foce.Complete as per drawing and Technical specification |
| 17 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes.-75 mm diameter |
| 18 | Providing and fixing on wall face unplasticised Rigid PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes-Single Tee without door-75x75x75 mm. |
| 19 | Erection of C.C.,pole upto 13 Mtr in B.B-Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as requried.Above 4.5 metre and upto 6.5 metre |
| 20 | Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required.Group-B |
| 21 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.-2x1.5 Sq.mm+1x1.5 Sq.mm earth wire |
| 22 | 2x2.5 sq.mm+1x2.5 sq.mm earth wire |
| 23 | .S.I.T.C of following rating reccess/surface mounted LED round/square shape Down light luminate with pressure die cast housing for single phase supply voltage,Luminarie shall be confirm to IS: 10322 part-5/section-2 or IEC-62722 with necessary accessories as required.140/150 W LED Street light |
| 24 | Carriage of MaterialsSand.Lead-15 Km |
| 25 | Stone Chips,Lead-15 Km |
| 26 | GST@18% |
| 27 | Labour Cess@1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender