Tender For Restoration Of Sub Divisional Office Building At Sandhole In Distt. Mandi Hp (Sh:- Providing And Fixing Of Sanitary Fitting And Other Miscellaneous Works)
Tender Value
2.33 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
6 days left
EMD
4668
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Sub Divisional Office Building At Sandhole In Distt. Mandi Hp (Sh:- Providing And Fixing Of Sanitary Fitting And Other Miscellaneous Works)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing to wall, ceiling and floor, CPVC tubes tube fittings & clamps including making good the wall, ceiling and floor within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 2 | 20 mm dia. |
| 3 | 25 mm dia. |
| 4 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 5 | Cera Make EWC One Piece LYS-WHT |
| 6 | Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I or M.S brackets painted white including cutting holes and making good the same but excluding fittings with in all leads and lifts. i) 580mmx430mm |
| 7 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings,standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. |
| 8 | Poviding and fixing C.P. bib cocks 15mm dia within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 9 | Poviding and fixing C.P. Swan neck pillar cock within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 10 | Poviding and fixing C.P. Stop cocks/Angle cocks 15mm dia (long nose) within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 11 | \\"Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 12 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 13 | Providing and fixing Geyser of 3 ltr cap. of Approved make to the entire satisfaction of Engineer in Charge |
| 14 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 15 | Providing and fixing charomium plated soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws etc. complete within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge |
| 16 | Providing and fixing Wall hanger within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 17 | providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete within all leads & lifts as per the direction and to the entire satisfaction of Engineer-in-Charge |
| 18 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 19 | 75 mm dia. |
| 20 | 110 mm dia. |
| 21 | Providing and fixing 10 mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles NITCO or equivlant 300 x 300x10 mm manufactured of approved shade and colour in flooring,tread of steps and landings laid over 12mm thick cement mortor 1:3 (1cement : 3 sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender