Tender For Restoration Of Rain Damages To Water Supply Schemes Karangad Barori In G.P Palhuin In Tehsil And Distt. Chamba H.P (Sh:- Construction of Filter Bed 20 Sqm Cap.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
15321
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Water Supply Schemes Karangad Barori In G.P Palhuin In Tehsil And Distt. Chamba H.P (Sh:- Construction of Filter Bed 20 Sqm Cap.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in earth work in all depths and in all classification of earth work such as pick work,jumper work,saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/hard rock, where blasting is prohibited,in all lifts including trimming and dressing or dies, levelling of beds to correct grade including shoning structuring, planking timbering and dewatering whereever required staking the excavatd soil not or than 3 mtr clear form edge of excavation and then returning the stacked soil in 15 cm layer when required into plinths, side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing the surplus excavated earth as directed with in all leads & lifts as per direction as satisfaction of Engineer-in-Charge. |
| 2 | Providing and laying cement conrete 1 : 3 :6 . ( 1 cement : 3 sand and : 6 grade stone aggregate40mm nominal size) and curing complete excluding cost of form work in foundation and plinth upto all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying cement concrete 1:1.5:3(1: cement :1.5 sand :3 graded crushed stone agg. of 20mm. Nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :- |
| 4 | Foundation footing bases of column and the like mass concrete with in all leads and lifts as per direction of the Engineer-in-charge. |
| 5 | Wall ( any thickness but not less than 0.10 mtr. Thickness) including attached pilasters buttersses, plinth and string courses etc, from top of foundation upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. |
| 6 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 8 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 9 | In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 10 | Foundation footing bases of column, foundation drains etc. including all leads and lifts as per direction of the Engineer-in-charge. |
| 11 | Providing mild steel/tor steel (reinforcement for RCC work) including bending,binding and placing in positioncomplete in all respect including all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge. |
| 12 | Providing & placing in horizontal layers Filtering media duly graded screened washed and cleaned as specified by the Engineer-in-charge. |
| 13 | Top layer Fine sand (Eff: size 0.20mm to 0.40 and Uniformity-co-efficient 2.00 to 3.00) |
| 14 | Second Layer : Coarse and 3mm-6mm |
| 15 | Third Layer:-Bajri 6mm to 20mm |
| 16 | Forth Layer:- 20mm tp 25mm |
| 17 | Bottem Layer:- Broken stone 50mm to 75mm |
| 18 | Laying,Jointing and fixing of GI Pipe of following diametre in Inlet,Outlet and Scour pipe with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 19 | For Inlet & Outlet 40mm Dia Nominal bore |
| 20 | Scour pipe 100mm Dia Nominal bore |
| 21 | Providing and fixing steel fiber reinforcement cement concrete (SFRC) man hole cover (Medium duty) and frame conforming to IS 12592 (Part-I) 1988 with latest ammendsments internal dia 500mm(Medium Duty) with in all leads and lifts as per direction of the Engineer-in-charge. |
| 22 | Finishing wall with water profing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per direction of Engineer-in-charge |
| 23 | Providing and laying cement concrete 1:3:6(1:cement :3 sand:6 graded stone aggregate 20 mm nominal sixe) and curing complete excluding cost of form work in foundation and plinth including carriage of material with in all leads and lifts, as per direction and entire satisfaction of the Engineer-in-Charge. |
| 24 | Providing Precast RCC slab 0.075 cm thick over CC 1:3:6 work below filter media. The Size of slab 48x22 or as [er site required with nominal reinforcement in cement concrete 1:2:4 (1 cement:2 sand: 4 graded stone aggregate 20mm nomial size) with inall leads and lifts as per the direction of Engineer-in-Charge) |
| 25 | Steel work welded in built-up section,trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guard bar, ladders, railing, brackets and similars work with in all leads and lifts as per the direction of Engineer-in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender