Tender For repair renovation Damages On Reuni To Khagna Road Km. 0/0 To 10/300 (Sh: Construction of Retaining Wall At R.D. 4/315 To 4/335, 4/405 To 4/415, 6/140 To 6/155, 6/490 To 6/505, 6/510 To 6/520, 7/210 To 7/220 And 9/915 To 9/925, Boundary Wal
Tender Value
51.32 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
5 days left
EMD
1.02 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair renovation Damages On Reuni To Khagna Road Km. 0/0 To 10/300 (Sh: Construction of Retaining Wall At R.D. 4/315 To 4/335, 4/405 To 4/415, 6/140 To 6/155, 6/490 To 6/505, 6/510 To 6/520, 7/210 To 7/220 And 9/915 To 9/925, Boundary Wall At R.D. 9/540 To 9/555, W-Shape Crash Barrier With Edge Wall At R.D. 1/135 To 0/185 And 1/315 To 1/363 And G-Iii, Patch Work At Various Rds.) Under Pdna-2025
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains for all all kind of soil and ordinary rocks including dressing of sides ramming of bottoms upto all lifts including getting out the excavated soil and disposal of surplus excavated soil as leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 2 | Earthwork in excavation for foundation of structure as per drawing and technical specification clause 305.1 including setting and c/o shoring and bracing removal of stumps and other deleterious materialand disposal up to a lead of 50 mtr dressing of sides and bottom backfilling in approved material including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 3 | Providing and laying plain cement concrete 1:3:6 ( 1 cement : 3 sand : 6 graded stone agreegate 20 mm nominal dia mixing by machenical concrete mixing 0.4/0.28 cubic metre & viberated mechanically so as to give a compressive strength and curring complete including the cost of from work as per drawing and technical specification clause 802, 803, 1202, and 1203 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 4 | Providing and laying plain cement concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone agreegate 20mm nominal dia mixing by machenical concrete mixing 0.4/0.28 cubic metre & viberated mechanically so as to give a compressive strength and curring complete including the cost of from work as per drawing and technical specification clause 802, 803, 1202, and 1203 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 5 | Providing and laying of boulder apron laid in wire crate with 4mm dia G.I. wire conforming Is: 280 and Is:4826 in 100x100mm mesh including 10 per cent extra and joints laid with stone boulders weighing not less than 25kg each as per drawing and technical specification clause 1301 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 6 | Providing weep holes in brick/ stone masonary/plain, reinforced concrete abutment, wing wall, return walls with 100mm dia PVC pipe extending through full width of the structure with slope of 1:20 towards drawing face complete as per technical specifications clause 614, 709, 1204.3.7 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 7 | Back filling behind abutment wing wall and returning wall complete as per drawing and technical specification clause 1204.3.8 granular material. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 8 | Providing and errecting W- metal beam crash barrier comparision of 3mm thick corrugated sheet matel beam rail 70cm above road/ground level fixed on ismc series channels vertical , post 150x5x5mm spaced 2 metre centre to entre 1.80 metre beight 1.10 metre below ground/round level all stel aprts and fitments to be gakvanised by hot dip process as fitting to filling to confirm to IS 1364 metal beam rail to fixed on the vertical post with a spare of channel section 150x5x5mm 330mm long complete as per clause 810 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 9 | Providing Laying,spreading and compacting stone aggregate of specific sizes to water bound macadam specifcation including spreading in uniform thickness, hand packing rolling with three wheeled 80-100 KN static roller in stages to proper grade and camber, applying and brooming, crushable, screening to fill up the interstices of coarse aggregate, watering and compacting to the required density as per techical specification clause 405 . WMM G-ǀǀ 63 mm to 40 mm size ( By manual means) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 10 | Providing and applying primer coat with Bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 1.2 kg/sqm using machenical means as per technical specification clause 502. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 11 | Providing and applying tack coat with Bitumen emulsion ( Rs-1 ) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and humgry bituminous surface cleaned with hydrulic broom as per technical specification clause 503. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. |
| 12 | Providing, laying and rolling of close-graded Mix seal surfacing material of 25mm thickness composed of 11.2 mm to 0.90 mm (Type-A) @ 0.338 kg/per ten square meter aggregates using penetration grade bitumen @ ie binder content @ 27.50 kg/10 sqm or 5.11% by weight and minimum density of MSS should be 2.10 gm/cc to required line,grade and level to serve as wearing course on a previously prepared base,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and gradient as level to as per Technical specification clause 509. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender