Tender For Construction Of Trekker Hut At Jardang Enroute The Miyar Glacier Of Miyar Velley, Udaipur Forst Range Of Lahoul-Spiti, Hp. Estimated Cost:- Rs.1497499-
Tender Value
14.97 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
37500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lahul and Spiti → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Trekker Hut At Jardang Enroute The Miyar Glacier Of Miyar Velley, Udaipur Forst Range Of Lahoul-Spiti, Hp. Estimated Cost:- Rs.1497499-
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and di disposal of surplus excavated soil as directed, within a lead of 50 m. Ordinary rock. |
| 2 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with Mud Mortar |
| 3 | Providing and laying stone soling tightly hand packed including levelling up and dressing |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 1st Class Kail wood |
| 5 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 3mm Polycarbonate sheet, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 6 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16mm |
| 7 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 8 | (i) 200x10mm size. |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 10 | (i)125 mm |
| 11 | 15cm (fifteen centimetre) mud mortar with local dry grass well furnished on the wooden plank in roofing (wooden plank and frame work to be measured and paid seperatly) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge. |
| 12 | Providing and fixing Glass wool` sheet beween Mud layer over ceiling |
| 13 | Providing and laying 25mm (Tewenty five milimetre) mud plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in mud mortar including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge. |
| 14 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings framed guard bars,ladders,railling,brackets and similar works. |
| 16 | Providing and fixing 0.62 mm thick plain prepainted steel sheet roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 17 | Providing and Fitting Battery inverter along with Solar photovolatic cell of Luminous NXG 1400+LPTT12150 H 150 Ah 1 No+160 Watt Solar Pannel 2 Nos.(Poly) with Solar Compatible Pure shine wave Inverter. |
| 18 | Electrical charging points Electric switch and S0cket ( 5 Numbereach) and G.I pole for installation of lightsalong with two light each room |
| 19 | construction of dry pit Latrine ( as per Traditional Construction ) and tin shed of size 1.2 x 1.20 mx 2.70 mtr height with iron sheet door , wassembled with nut and bolts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender