Tender For Day To Day Maintenance Of Bsnl Buildings And Staff Quarters In Mohali Area For The Period Of The Year 2026-2027.
Tender Value
2.85 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
5705
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
S.a.s Nagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Of Bsnl Buildings And Staff Quarters In Mohali Area For The Period Of The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared to the approved municipal dump. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 5 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 6 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, and door width upto 1000 mm) with necessary accessories and screws etc. complete. |
| 7 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 8 | 250x16 mm |
| 9 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 10 | 150x10 mm |
| 11 | 200x10 mm |
| 12 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 13 | Twin rubber stopper |
| 14 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 15 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 16 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 17 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 19 | Float glass panes of thickness 4 mm |
| 20 | Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
| 21 | Old work (one or more coats) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 23 | One or more coats on old work. |
| 24 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 25 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 27 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 28 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. |
| 30 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 31 | Orissa pattern W.C. pan of size 580x440 mm |
| 32 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 34 | Supplying and fixing C.I. cover without frame for manholes : |
| 35 | 455x610 mm rectangular C.I. cover (light duty) the weightof the cover to be not less than 23 kg |
| 36 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. |
| 37 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 38 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 39 | 100x100 mm size P type |
| 40 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 41 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : |
| 42 | 150 or 200 mm diameter |
| 43 | Removal of plantation like pipal tree etc. from the shafts, roofs and other part of Bldg. at all heights and removing the roots with acid etc. complete as per direction of E-in-C. |
| 44 | Cleaning of Manhole of all sizes in the compound, complete removal of earth silt, slush, brick bats garbage & other refuses disposing off the same at an authorized muicipal dump complete as per the directions of Engineer-in-charge |
| 45 | Cleaning of sewerline of dia upto 300mm leading to manholes including complete removal of earth, slush brick bats and other waste & refuses disposing off the same at an authorized municipal dump complete as per the directions of Engineer-in-charge |
| 46 | Taking out old existing aluminium shutter and refixing after necessary repair to pivot/floor spring etc. complete as per direction of E.I.C. |
| 47 | Restoration of intruptted water supply by mechanical means using hydraulic pressure pump and to ensure free flow of water all complete as per direction of E.I.C. |
| 48 | Detection of leakage points in GI pipes in hidden conditions in sub soil by removal of earth, demolishing cement concrete, chequered tiles or like as per site conditions , regulating and controlling water supply to detect leakage points and taking preventive measures to control of over flow of water and ensuring uninterrupted water supply separately for the users (Any GI fittings & accessiries required during the above operations shall be paid for separately) |
| 49 | Arranging services for plumbing jobs by Plumber for day to day maintenance for all BSNL Buildings and staff quarters including repair/fixing of bib cocks, Stop cocks,pillar taps,pvc connection, shower rose,GI/CPVC pipes, gully traps,Gate valves etc filling all type of S/I & W/S joints etc. and removal of chockage/blockage in WC seats/traps & disposal of waste material all complete as per direction of Engineer-in Charge. All T&P shall be arranged by the agency except materials which will be supplied by the department. (Carrying out all the above Services / opertions considering plumber for full day on all days of one month will be considered as one job for payment) (Cost also includes use of M-seal and white cement where ever requiered) |
| 50 | Cleaning of all roof top i/c Mumty of staircase, Khurra, under of water tank etc. by removing silt, fungi etc. and disposal of malba at an authorised municipal dump complete as per direction of E.I.C. |
| 51 | Providing & Supplying ISI marked follwing items of approved quality at BSNL Civil Sub Division office. |
| 52 | C.I./MS brackets for Sink and wash basin |
| 53 | Brass bib cock 15mm dia.(weighing400gm) |
| 54 | Pastic ball Cock 20mm with gola & rod (prayag make or equivalen) |
| 55 | Brass stop cock 15mm dia. (weighing 400gm) |
| 56 | CP brass short body bib cock 15mm (weighing min. 400gm ) |
| 57 | PVC long / Short flush Bend |
| 58 | CP brass long body bib cock 15mm (weighing min. 690gm ) |
| 59 | CP brass angle valve 15mm (weighing min. 340gm ) |
| 60 | CP brass pillar cock 15mm (weighing min. 650gm ) |
| 61 | Stainless steel jet washer with hose pipe for EWC of make Chilly or eqivalent |
| 62 | Stainless steel Jali for traps of min. dia. 100 mm |
| 63 | White plastic seat cover with lid, CP brass hinges and rubber buffers |
| 64 | PVC connection pipe ( prayag or equivalent) 45cm long, 15mm bore |
| 65 | Semi rigid PVC waste pipe 32mm dia. |
| 66 | Semi rigid PVC waste pipe 40mm dia. |
| 67 | PVC cistern handle |
| 68 | PVC cistern ball cock |
| 69 | CP extension nipple 15mm dia and 40 mm long |
| 70 | Mild steel hexa nipple / plug 15mm. |
| 71 | Mild steel hexa nipple / plug 20mm. |
| 72 | PVC tank cover for over head tank 300 litre /500 litre/ 1000 litre capacity |
| 73 | Face/Spindle 15 mm nominal bore for bib cocks/pillar cocks/angle valves |
| 74 | Interal fittings and Siphon for PVC Cistern of CERA or equivalent quality |
| 75 | PTMT 15mm bib cocks prayag or equivalent |
| 76 | PTMT 15mm pillar cock prayag or equivalent |
| 77 | PTMT 15mm stop cocks prayag or equivalent |
| 78 | PTMT 15mm Angle valve prayag or equivalent |
| 79 | GI union 15mm dia |
| 80 | GI union 20mm dia |
| 81 | GI tee/elbow/socket 15mm dia |
| 82 | GI tee/elbow/socket 20mm dia |
| 83 | GI nipple 20 mm dia 100 mm long |
| 84 | GI nipple 20 mm dia 50 mm long |
| 85 | 15 mm Gun metal ball valve with rod assembly complete |
| 86 | 20 mm Gun metal ball valve with rod assembly complete |
| 87 | Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) |
| 88 | Bevelled edge Mirror of superior make glass 60x45 cm |
| 89 | UPVC Pipe 110mm dia 4Kg/sqcm of Finolex or equivalent make |
| 90 | GI Pipe 15mm nominal bore |
| 91 | GI Pipe 20mm nominal bore |
| 92 | CPVC Pipe 20mm dia |
| 93 | CPVC Pipe 25mm dia |
| 94 | CPVC elbow/socket/tee 20mm dia |
| 95 | CPVC elbow/socket/tee 25mm dia |
| 96 | CPVC Union 25mm dia. |
| 97 | CPVC Union 20mm Dia. |
| 98 | CPVC tank nipple 25mm Dia. |
| 99 | CPVC Tee/ elbow Brass (3/4\\" x 1/2\\") |
| 100 | CPVC MTA/ FTA Brass (3/4\\" x 1/2\\") |
| 101 | Credit of old unserviceable material obtained from dismantling/demolishing : |
| 102 | Old rusted unserviceable C.I./SCI Pipes and fittings/Mild steel sections/G.I. etc. |
| 103 | Brass/ C.P. brass bib cock/stop cock/pillar cock/gate vavle etc. |
| 104 | PVC bib cock/other PVC items |
| 105 | PVC water storage tank of capacity upto 1000 litre capacity |
| 106 | Old aluminium tubular sections upto any size Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender